Home  //  TIG Welders  //  Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174

Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174

Code: 951174

Availability: Usually ships the next business day



Mfg Industrial Price: $5,213.00
Cyberweld Price: $4,058.00




QTY:
Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174+ CLICK TO ENLARGE



Dynasty® 200 DX Air-Cooled Package (Foot Pedal) 951174

Maximum flexibility - Miller Electric combines advanced inverter technology with Auto-Line™ technology, offering the most flexible AC/DC TIG/Stick power supply in the welding industry. The Dynasty® 200 DX combines size, weight and Autoline automatic input voltage sensing with world class arc performance.

The Miller Dynasty® 200 DX TIG welder provides pulsed TIG welding along with the basic features that are required for most AC/DC TIG or STICK welding applications.



Processes
  • AC/DC TIG(GTAW)
  • Pulsed TIG(GTAW-P)
  • Stick(SMAW)

    Applications:
  • Industrial to Heavy Industrial Apps
  • Petro/Chem Fabrication
  • Aerospace
  • Food/Beverage Industry
  • Mechanical Contractors
  • Shipboard Installation/Repair
  • Dairy Industry

    Features

  • DX - When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control.

    AC TIG Features
  • Blue Lightning™ - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
  • Extended AC Balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
  • AC frequency (20-250 hz)controls the width of the arc cone and the force of the arc.
  • Advanced AC Waveforms



    DC TIG Features
  • Exceptionally smooth and precise arc for welding exotic materials.

    Stick Features (AC/DC)
  • Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
  • Hot Start™ adaptive control provides positive arc starts without sticking.
  • AC frequency control adds additional stability when Stick welding in AC for smoother welds.
  • Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.

    General Features
  • Built-in pulser reduces heat input; adds arc stability.
  • Fan-On-Demand™ cooling system only operates when needed.
  • Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
  • Portable in the shop or at the job site - at 45 lb the unit is easily moved from location to location.
  • Lift-Arc™ start provides TIG arc starting without the use of high frequency.
  • Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
  • LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
  • Squarewave technology is the AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current.
  • Thermal Overload Protection - Internal components are protected from damage by thermal overload protection hich automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.



    Comes complete with
  • Dynasty® 200 DX power source
  • Adjustable shoulder strap
  • 10 ft (3 m) primary cord li>(2) international (Dinse 50 mm) connectors
  • RFCS-14HD remote foot pedal
  • Protective carrying case
  • Weldcraft® 25 ft (7.6 m) WP17 TIG torch with adapter
  • Smith® flow gauge regulator with 12 ft (3.7 m) gas hose
  • AK2C accessory kit
  • .040", 1/16" and 3/32" cerium tungsten
  • Collets and cups
  • 200 amp, 15 ft (4.6 m) stick electrode holder
  • Work clamp with 15 ft (4.6 m) #4 cable
  • (1) air-cooled TIG torch adapter

    This item ships Free via standard ground shipping within contiguous U.S.

  • Download Dynasty 200 Spec Sheet (Requires Adobe Acrobat Reader)
    Download Dynasty 200 Spec Sheet (Requires Adobe Acrobat Reader)

    Miller 2 Wheel Trolley Cart 300480Miller 2 Wheel Trolley Cart 300480Miller 2 Wheel Trolley Cart 300480
    2 Wheel Trolley Cart for Dynasty® 200 Series and Maxstar® 200 Series TIG welders.


    Availability: Usually ships the next business day

    Code: 300480

    Mfg Industrial Price: $454.00Cyberweld Price: $408.60



    Miller Dynasty 200 Protective Cover 195322Miller Dynasty 200 Protective Cover 195322Miller Dynasty 200® Protective Cover 195322
    Now you can protect the finish and value of your Dynasty® 200 SD or Dynasty® 200 DX TIG welder with a Protective Cover from Miller.


    Availability: Usually ships the next business day

    Code: 195322

    $57.00



    TurboTorch Inert Gas Cylinder - 40 Cubic Foot 0916-0028TurboTorch Inert Gas Cylinder - 40 Cubic Foot 0916-002840 Cubic Foot Inert Gas Cylinder for Argon(75%)/CO2(25%), Argon or Nitrogen.


    Availability: Usually ships the next business day

    Code: 0916-0028

    Mfg Industrial Price: $255.00Cyberweld Price: $139.25

    Options: 



    Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174
    $4,058.00
    5 Stars based on 7 Review(s)
    Kimball
    United States
    5 Stars
    I would recommend this item to a friend.

    Great machine. Great service
    May 8, 2014
    Machine shipped right away. Complete with all parts as advertised, boxes in perfect condition. Very happy customer.

    Rob O
    illinois
    5 Stars
    I would recommend this item to a friend.

    Really great Tig machine
    December 15, 2013
    I've used a Dynasty 200 before so I knew the quality I was getting. It's a good all around machine. Don't have much to say other than... For anyone that does buy this machine, do a factory reset (procedure listed in manual) to ensure you start with default settings. I believe they test the machines and in doing so sometimes they are not reverted to factory settings. For a novice this can cause an issue. So just for good measure, do a factory reset.
    Pros:
    All around great machine. Alot of capabilities packed into a small package. Pretty light weight. Autosense allows machine to run on different voltage/amperage rated outlets without having to switch wires inside the machine which allows the use of the machine anywhere you desire.
    Cons:
    No real cons other than machine does not come with a plug. Though at the same time they don't know whether you will run single or 3 phase and/or a 125/250 volt receptacle... Other than that, i have nothing bad to say.

    Bob
    Arlington, Virginia
    5 Stars
    I would recommend this item to a friend.

    Great TIG Welder
    July 10, 2013
    This is a solid and reliable piece equipment. Light enough to take to the work place and has all the features needed to TIG weld anything. Auto-sensing voltage input is a convenient feature but does require power cord adapters if you want to be able to use on-site power supply. Inverter technology might not be the latest, but this is one reliable made in USA product with a national network of suppliers.
    Pros:
    Easy to read and set controls. Dependable equipment.

    Bill
    N.M.
    5 Stars
    I would recommend this item to a friend.

    Awesome welder
    January 19, 2013
    Really nice welding package. Does exactly what is advertised. I put it to use immediately. Although I use it in my shop, I can see how it would be a great portable asset for a contractor. My primary use is TIG aluminum, I have not used it for Stick yet,
    Pros:
    Compact Easy to setup or adjust
    Cons:
    Price

    johnathan
    los angeles, CA
    5 Stars
    I would recommend this item to a friend.

    dynasty 200 dx
    November 25, 2012
    this machine does everything I need it to and more. could have bought a more affordable machine but i didnt want to risk quality.
    Pros:
    Frequency adjustment super smooth
    Cons:
    price

    Carl
    NYC
    5 Stars
    I would recommend this item to a friend.

    awesome
    September 29, 2012
    I've been away from welding for a while -- this machine makes it easy to get back to it -- truly a great machine. very high quality components -- easy to use -- welds anything.
    Pros:
    versatile portable [sort of] works in any plug

    Jerry J
    San Antonio
    5 Stars
    I would recommend this item to a friend.

    Dynasty 200 DX
    July 14, 2012
    I am happy with the welder and with the vendor. The delivery time was shorter than I expected and was totally complete. It works perfectly.
    Pros:
    Very complete package. Nice attention to design and manufacturing details. Works perfectly
    Cons:
    It costs a lot of money but, IMO, it is worth it.




    By william e g from hampton,va on January 22, 2013
    where made
    By Customer Service on January 23, 2013

    Answer:
    Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174 is made in USA

    By Mike from NY on October 16, 2013
    Why does this item appear to be a different machine than what is listed on other sites. This machine has very few controls for flow, waveform etc. Other sites including Miller show the Dynasty 200 DX: Foot Control Contractor Kit Pkg (Air Cooled) 951174 having at least 7 digital function buttons, digital voltage and amp displays, and a manual pulse knob.

    Very confusing when trying to shop for the 951174 package and the photos don't match the manufacturers photos.

    Thank you - I hear only good things about your company, but I am confused.
    By Customer Service on October 17, 2013

    Answer:
    The photo of the Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174 show the unit with the control panel door in the closed position The door is located below the control knob shown.. When opened all function controls can be seen and are accessible

    By Ian Katwaroo from New Jersey on September 11, 2013
    Can the Dynasty 200DX be plug into Trailblaser for power source
    By Customer Service on September 16, 2013

    Answer:
    The Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174 can be run off of a Trailblazer as long as your have the proper adapters

    By mac from reno nv on April 26, 2014
    I assume the WP17 tig torch in this kit is air cooled? Is the protective case the #195322? Can this welder be wired to 220v? I have 3 phase power available, does it perform better on 3 phase?
    By Customer Service on April 28, 2014

    Answer:
    The tig torch that comes with the Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174 is a WP 17.. The 195322 is a canvas cover for the Dynasty 200DX.. You will not notice any performance differences if you run the Dynasty 200 DX on 220v single or three phase power.. However it will draw a little less on three phase

    By Nan from St Louis MIssouri on March 21, 2013
    can you ship this to Thailand?
    By Customer Service on March 22, 2013

    Answer:
    Sorry we do not ship outside the U S

    By Marc from Florida on June 15, 2013
    Can the MVP Plug system be put on the Dynasty 200 DX? If so what is needed?
    By Customer Service on June 17, 2013

    Answer:
    the Miller MVP plug system is not designed to be used with the Dynasty 200 DX Air-Cooled Package








    By Gordon from California on December 20, 2013
    what miller warranty is included? And what is the full Miller part number? What year is this Item built?
    By Customer Service on December 27, 2013

    Answer:
    Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174 is Miller part number 951174. The machine is made in 2013, brand new from MIllers warehouse. It comes with Millers 3 year warranty. Here is a link to the Miller Warranty:


    http://store.cyberweld.com/milwar.html


    Cyberweld is Upfront
    Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174 detail
    Dynasty 200 DX Air-Cooled Package (Foot Pedal) 951174