Hobart Trek 180 MIG Welder - Battery Powered Weld anywhere with this battery-powered welding package! The Trek® 180 battery-powered wire welder is the first professional system on the market for MIG welding “off the power grid.” No matter where your hobby or job takes you, the Trek® delivers heavy duty weld power to fabricate or repair 24 ga. up to 1/4 in. mild steel in a single pass. Powered by two internal sealed lead-acid batteries, the high-purity energy storage technology enables the Trek® to be charged completely in about 90 minutes and quickly recharged in about 40 minutes. The integrated charging system is powered by standard 115 volt household current and can operate while plugged in or completely cordless. The Trek delivers 180 amps (approx. 10% duty cycle) on 115 volt standard power … a weld output which, until Trek®, has been limited to 230 volt welders. The unit is setup for both self-shielded flux-cored and solid gas-shielded wires from .024 to the .035 diameter. Applications Maintenance Construction Auto Body Farm/Ranch Rental Home Off-road Features Infinite voltage and wire feed control for precise arc performance Welds 24 gauge up to ¼ inch mild steel, 180 A maximum output Built-in cast aluminum wire feeder with quick-release drive roll lever and quick-change drive roll Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding Easy access to polarity changeover includes storage holes for spare tips Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire Twin 12 V premium high-performance sealed lead-acid batteries, run on batteries or plugged in the wall The only 180 A welder that operates on 115 VAC Welds approximately 100 inches of 1/8 in. mild steel before recharging with extremely fast recharge times (approx. 40 min. on 115 VAC outlet) from its built-in charger Capable of recharging on automotive power inverter (400 continuous watts minimum) using AutoPower technology to detect input power Voltage control delivers consistent arc regardless of battery charge level Tough polymer case protects against extreme environments Unit weighs only 51.9 lb. (23.5 kg) including batteries LED indicators provide basic operation feedback Removable storage bag provides cable management of standard MIG gun, work cable, clamp Specs Comes Complete With Rugged constant-voltage DC welder power source Built-in gas solenoid valve and polarity changeover Ergonomic 10 ft. (3m) H100L4-10 MIG torch Removable power/recharging cord with plug 10 ft. (3 m) work cable with clamp Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire Two premium high-performance sealed lead-acid batteries Extra .030 in. (0.8 mm) contact tips Pouch for storage of MIG gun and work lead during transportation Durable built-in wire feeder with quick-change drive rolls Weld set-up and parts information chart Free standard ground shipping within contiguous U.S. Availability: Usually ships the next business day. 500539Mfg Industrial Price: $1,818.00Cyberweld Price: $1,429.00 Download Trek 180 Spec Sheet (Requires Adobe Acrobat Reader)Download Trek 180 Spec Sheet (Requires Adobe Acrobat Reader) Miller M-Series MIG Contact Tips - Pkg of 10Package of 10 genuine Miller contact tips for all Hobart and Millermatic series MIG welders equipped with M Series or H Series MIG guns. Availability: Usually ships the next business day. 00006X$13.90 Diameter: .023 (087299).030.035.045 Miller Contact Tip Adapter(169716) - Pkg of 2Package of 2 genuine Miller replacement contact tip adaptor for Miller/Hobart H9, H-10, H-14, H100L4-10, M-10 and M-15 MIG guns. Availability: Usually ships the next business day. 169716$16.92 Miller MIG Nozzle (169715) - Pkg of 2Package of 2 - .500 (standard) genuine Miller MIG nozzles for Miller M-10, M-15 and Hobart H-9, H-10, H-14 and H100L4-10 series MIG guns. Availability: Usually ships the next business day. 169715$17.82 Miller Gasless Flux Cored Nozzle (226190)Package of 1 - Miller Gasless Flux Cored Nozzle. For use with Miller/Hobart H-9, H-10, H-14, H100l4-10, M-10 and M-15 MIG guns. Availability: Usually ships the next business day. 226190$6.75 All prices shown are in U.S. Dollars The Cyberweld® name, logo and the slogan "Weld with your mouse"® are registered service marks of: J.W. Goodliffe & Son, Inc. 1900 E. Elizabeth Ave. P.O. Box 4370 Linden, NJ 07036 (800) 419-0580 FAX (908) 486-9366 Phone answered live M-F 8:00am to 4:30pm EST © 2000 - 2009. All rights reserved.