Home  //  Miller Welders  //  Miller MIG Welders  //  Millermatic 125 Hobby MIG Welder 907692

Millermatic 125 Hobby MIG Welder 907692

Code: 907692
Millermatic 125 Hobby MIG Welder 907692+ CLICK IMAGE TO ENLARGE
Cyberweld Price: $549.00
Mfg Industrial Price: $696.00
You Save:  $147.00
Availability: Usually ships the next business day
QTY:
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Millermatic® 125 Hobby MIG Welder with Auto-Set 907692

The Millermatic® 125 Hobby MIG welder is an entry level MIG welder with the quality and features of a Miller machine. The 125 Hobby is a 130 amp portable MIG welder that runs on standard 120 volt household current. It features Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).

Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. Manual welding mode must also be used when MIG welding aluminum, stainless steel or for flux-cored welding. The parameter door chart lists voltage and wire feed speed settings options.

The Millermatic 125 Hobby's cast aluminum wire drive system, factory installed gas solenoid and thermal overload protection are standard features typically found in welders costing hundreds of dollars more. The 125 Hobby also comes with Miller's True Blue® three-year warranty.



Processes
  • MIG (GMAW)
  • Flux Cored (FCAW) (gas and self-shielded)

    Applications
    Light Industrial Applications
    Light Fabrication
    Farm/Home



    Features:
  • Auto-Set™ automatically provides the right settings to MIG weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters.
    Set the wire diameter, a blue light shows Auto-Set is activated
    Dial in the thickness of what you are welding
    Start welding with the exact parameters you need!
  • Cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up.
  • Factory-installed gas solenoid makes it easy to switch between MIG welding and flux-cored wire.
  • Quick Select™ drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.
  • Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.
  • Uses 4 inch or 8 inch (102 or 203 mm) spools and can be set up to weld with .024 to .030 inch (0.6 to 0.8 mm) solid wire and .030 to .035 inch (0.8 to 0.9 mm) flux-cored wire.

    Specs



    Comes complete with:
  • Millermatic® 125 MIG Welding Power source Power cord with plug
  • 8 ft. (2.4 m) M-80 MIG gun and cable assembly
  • 8 ft. (2.4 m) work cable with clamp
  • Argon and AR/CO2 mix flow gauge regulator with gas hose
  • Hobart® spool of .030 in. (0.8 mm) solid wire
  • Two contact tips for .030 in. (0.8 mm) wire
  • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • Material thickness gauge



    This item ships Free via standard ground shipping within contiguous U.S.

  • Download Millermatic 125 Hobby Spec Sheet (Requires Adobe Acrobat Reader)
    Download Millermatic 125 Hobby Spec Sheet (Requires Adobe Acrobat Reader)

    Millermatic 125 Hobby Protective Cover 301333Millermatic 125 Hobby Protective Cover 301333Millermatic® 125 Hobby protective cover protects the finish of your Millermatic 125 Hobby MIG welder.


    Availability: Usually ships the next business day

    Code: 301333

    $52.00



    Miller Running Gear/Cylinder Rack 301239Miller Running Gear/Cylinder Rack 301239Heavy-duty welder cart/cylinder rack is perfect for small Millermatic and Handler MIG welders and Diversion TIG welders.


    Availability: Usually ships the next business day

    Code: 301239

    $191.00



    TurboTorch Inert Gas Cylinder - 40 Cubic Foot 0916-0028TurboTorch Inert Gas Cylinder - 40 Cubic Foot 0916-002840 Cubic Foot Inert Gas Cylinder for Argon(75%)/CO2(25%), Argon or Nitrogen.


    Availability: Usually ships the next business day

    Code: 0916-0028

    Mfg Industrial Price: $255.00Cyberweld Price: $139.25

    Options: 


    Miller .024 MIG Consumable Kit 234607Miller .024 MIG Consumable Kit 234607Genuine Miller .024 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with Millermatic MIG welders.


    Availability: Usually ships the next business day

    Code: 234607

    $25.81

    Wire Diameter: 


    Miller .030 MIG Consumable Kit 234608Miller .030 MIG Consumable Kit 234608Genuine Miller .030 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with smaller Millermatic MIG welders.


    Availability: Usually ships the next business day

    Code: 234608

    $25.81

    Wire Diameter: 


    Miller .035 MIG Consumable Kit 234609Miller .035 MIG Consumable Kit 234609Genuine Miller .035 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with smaller Millermatic MIG welders.


    Availability: Usually ships the next business day

    Code: 234609

    $25.81

    Wire Diameter: 



    12 Questions & 13 Answers
    Bronson
    from LA asked:
    January 10, 2017
    does it come with aluminum spool gun. if not how much is it ?
    The Millermatic 125 Hobby MIG Welder 907692 will not accept a spoolgun but it can weld aluminum using the standard mig gun. Welding aluminum in this manner will be very difficult . This machine would not be a good choice if you plan on welding aluminum on a regular basis
    Customer Service
    on January 11, 2017

    Bob
    from ma asked:
    November 10, 2016
    What is the weight of the welder
    The Millermatic 125 weighs approximately 62lbs.
    Customer Service
    on November 23, 2016

    juan mejia
    from TX asked:
    October 10, 2016
    does this machine weld aluminum?
    The Millermatic 125 Hobby MIG Welder 907692 will not accept a spoolgun but it can weld aluminum using the standard mig gun..Welding aluminum in this manner will be very difficult . This machine would not be a good choice if you plan on welding aluminum on a regular basis
    Customer Service
    on October 11, 2016

    Terry A
    from Arizona asked:
    August 3, 2016
    Can this welder be set up to MIG braze? i.e. can it handle 100% argon and does it have a teflon lined gun? Thanks.
    The Millermatic 125 Hobby MIG Welder 907692 can be used to run silicon bronze mig wire with argon sheilding gas. Miller does not offer a teflon gun liner for this model.
    Customer Service
    on August 3, 2016

    Richard Rios
    from San Antonio, TX asked:
    July 21, 2016
    I have a Hobart Champion 145 gas welder...can I run the Millermatic 125 off of its electrical plugs?
    The Millermatic 125 Hobby MIG Welder 907692 requires 2.65KW at the rated output of 85 amps at 18.25 volts DC. The Hobart Champion 145 can produce 4KW of auxiliary power and should be able to support the Millermatic 125 unless the Millermatic 125 is run at max output.
    Customer Service
    on July 22, 2016

    Bryon
    from Arizona asked:
    July 6, 2016
    Is this spool gun capable?
    The Millermatic 125 Hobby MIG Welder 907692 is not spoolgun capable
    Customer Service
    on July 7, 2016

    Rafael
    from Texas asked:
    March 11, 2016
    I would like to know if there is warranty? If so for how long?
    The Millermatic 125 Hobby MIG Welder 907692 has Millers True Blue 3 year warranty.
    Customer Service
    on March 14, 2016

    Ben
    from Las Vegas asked:
    January 17, 2016
    Can I use a portable gas generator to run the Hobby 125? If so how many watt generator.
    Miller indicates that the Millermatic 125 Hobby MIG Welder 907692 can be run off of a generator. You will need a generator that is capable of 5kw .
    Customer Service
    on January 18, 2016

    Scott Ayres
    from Chester, NJ asked:
    December 30, 2015
    I'm looking to do small welds 1" to 2" on 3/16" 304 grade stainless steel plate...will the 125 handle this with .30 SS wire and C25 shielding gas?
    Miller advises that the Millermatic 125 Hobby MIG Welder 907692 will not perform properly in your application. They recommend that the minimum machine you will need for you application would be a Millermatic 141 MIG Welder 907612. If this is a production process they recommend stepping up to a Millermatic 190 MIG Welder 907613 or a Millermatic 211 MIG Welder With Advanced Auto-Set 907614
    Customer Service
    on January 6, 2016

    Howard Camardelle
    from Willis, Texas asked:
    December 29, 2015
    Is this transformer or inverter based? Thanks!
    The Millermatic 125 Hobby MIG Welder 907692 is transformer based.
    Customer Service
    on January 4, 2016

    Von
    from CO asked:
    November 13, 2015
    What is the maximum thickness of metal that this will be able to weld?
    Miller indicates that the Millermatic 125 Hobby MIG Welder 907692 will weld up to 1/8" thick when using solid mig wire and shielding gas and will weld up to 3/16" when using a flux cored wire.
    Customer Service
    on November 13, 2015
    Miller indicates that the Millermatic 125 Hobby MIG Welder 907692 will weld up to 1/8" thick when using solid mig wire and shielding gas and will weld up to 3/16" when using a flux cored wire.
    Customer Service
    on November 13, 2015

    Patrick Brown
    from Tacoma, Washington asked:
    November 12, 2015
    Do you have to use gas when using this welder
    You DO NOT have to use gas with the Millermatic 125 Hobby MIG Welder 907692. You can us gasless wire.
    Customer Service
    on November 13, 2015


    By Ben
    Mayville, ND
    Works good
    August 19, 2016
    It came as shown, everything works as it says. No complaints yet. I was a welder to begin with but I was in a coma for a month, this welder will help me get back to work
    By todd
    st. Louis
    great welder
    March 3, 2016
    Great transaction. Prompt
    By bruce
    CT
    great welder
    February 20, 2016
    needed a welder and miller is a great brand. It was a good price and worth it.
    Prosprice was great welds great.
    Consdidn't come with argon tank
    By Don H.
    Akron Michigan
    Great welder
    January 30, 2016
    Easy ordering and tracking.received on a saturday by Fed Ex, no damage to cardboard box but when i opened it .plastic hinge on wire access door was broke . Tuesday morning called Cyberweld, explained to Jasmine what happened. She asked me for email address .She asked for me to describe the problem and take pictures of damage . The next day Cyberweld called to say the factory (Miller welder)was mailing out new hinge. I had new hinge by end of week. Cyberweld, great Internet company!
    ProsGreat customer service
    ConsNone
    By Ron H.
    Shoreview MN
    Great welder
    January 4, 2016
    I purchased this to take up to my pole barn where I'm building a rat rod truck. I need to replace the floor boards. The welder is far better than my old larger unit so I'm selling my old unit and buying another like this to take up north.
    Pros115v can be used anywhere. Auto setting is a ice feature but not really necessary if you have some experience.
    ConsLimited for major heavy material and projects but I only do lighter projects usually 1/8" so that is not an issue for me.
    By Chris
    Aiken, SC
    Mig Welder
    December 17, 2015
    Ordering was a breeze and product was as it was described and so far using the welder it has been working well. Great Purchase

    back
    close menu
    Millermatic 125 Hobby MIG Welder 907692 detail
    Millermatic 125 Hobby MIG Welder 907692