Miller Bobcat® 250 LP Welder 907504
The Miller Bobcat® 250 LP is designed to operate exclusively on LP Gas (Propane). Use the Bobcat 250 LP where work site ventilation does not allow the use of a standard gasoline or diesel engine. The redesigned Miller Bobcat® 250 LP is quieter to operate, smaller and lighter and
easier to maintain.
Stick Welding (SMAW)
Flux Cored Welding (FCAW)
MIG Welding (GMAW)
DC TIG Welding (GTAW)
Non-Critical AC TIG Welding (GTAW)
Air Carbon Arc (CAC-A) Cutting
and Gouging (3/16 in carbons)
Air Plasma Cutting and Gouging
with optional Spectrum models
Structural Steel Work
Use as a Stand-Alone Generator
Kohler LP engine - runs on clean burning propane gas using a standard 33 lb. propane forklift cylinder (not included).
IMPROVED! Quieter and Better Sound - Significant improvements in sound level and quality
offer better jobsite communication, which provides
a safer, more efficient working environment for you
and your crew. New Bobcat 250 welder/generators have
rotated the engine toward the front to create more
efficient airflow, resulting in significantly quieter
operation. Now you can start your job earlier in
the day and end it later, as well as work around
hospitals, businesses, and residential areas.
IMPROVED! Smaller and Lighter Design - New Bobcat 250 welder/generators take up less space
on trucks and trailers, leaving more room on your
truck for other equipment and tools. Plus, they're
easier to move safely around jobsites, even with
weld cables and running gear attached.
IMPROVED! Easier Maintenance - With its intuitive design, the daily maintenance of the new Bobcat 250 LP welder/
generators is faster and easier. With front panel maintenance displays, you know
when your equipment needs to be serviced. And servicing is simple because of:
Oil checks that can be performed from the top by the front panel
Toolless panels that allow for quick access
Single-side fuel fill and oil drain/filter
Long Runtimes - Large 12-gallon fuel capacity means many hours
of run time before refueling.
Versatile AC and DC Weld Output - Provides quality welds on all types of metals.
DC is smooth and easy to run while AC Stick is
used when arc blow occurs.
Accu-Rated™, Not Inflated Generator Power - Miller's Accu-Rated™ 11,000 watts of usable peak power is
delivered for a minimum of 30 seconds. Accu-Rated means peak power is usable
for maximum generator loads such as plasma cutting, Millermatic® MIG welders
and motor starting. Accu-Rated peak power beats the competition's very short duration
peak or surge power. Use your peak power, it's more than a number.
Smooth Power - Not Spike Power -
Revolutionary ten-degree skewed-rotor design
optimizes generator performance for smoother power,
not spiked power found with other brands. Better power,
NOTE: MUST order OPTIONAL propane cylinder mounting rack and connection kit separately above.
Get a FREE Chisholm, fixed base, 10 inch lead reel set ($322 MSRP Value) with purchase of a Miller® Bobcat® 250 welder. Each 10 inch spool will hold up to 150 feet of 1/0 welding cable or 125 feet of 2/0. Expires 9/30/17. (No color substitutions allowed.)
This item ships Free via standard ground shipping within contiguous U.S.
from Woodstock, IL asked:
June 17, 2017
What kind of run time could I expect on 1 cylinder 33Lbs of propane using the typical rated load for gasoline? Thank you
Miller Bobcat 250 LP Welder 907504 will burn approximately 1 gallon of fuel per hour at idle and 2 1/2 gallon per hour under full load. ( a 33# propane tank holds 8 gallons)
on June 20, 2017
from Deming, NM. asked:
July 24, 2015
Can I get the LP hose without the mounting bracket ?
You can purchase just the LP hose used on the Miller Bobcat 250 LP Welder 907504. The part # for this item is 255131 and your cost would be $207.44..We do not stock this item and it we would have to order it for you.
on July 27, 2015