Miller Protective Cover #301382 is designed specifically for your Maxstar® or Dynasty® 210, 280 or 300 TIG welder.
Miller Dynasty 300 Multiprocess Contractor Package 951939
Select Your Free Zone Promo Bonus
Miller® Dynasty® 300 Multiprocess Contractor Package with Wireless Foot Control Complete and ArcReach® Suitcase® 12 Wire Feeder 951939
The Miller® Dynasty® 300 Multiprocess Contractor Package is an advanced 300 amp welding system that comes complete with ArcReach® Suitecase® 12 wire feeder, wireless remote foot control and air-cooled TIG torch package. The 300 Multiprocess is the only welder you'll need on the jobsite to perform MIG, Stick, AC/DC TIG welding and air carbon arc gouging.
The Dynasty 300 Multiprocess has built in TIG pulse and advanced AC/DC wave forms and provides up to 300 amps of welding output. Adjustable TIG pulse can be set from 0.1 to 500 pulses per second (pps). AC TIG frequency adjustment has a range from 20-400 Hz. Extremely low amperage TIG output allows you to go down to as low as 2 amps on AC and 1 amp on DC. Wave forms are adjustable in both AC and DC pulsed TIG welding modes for a truly customized welding arc.
The Dynasty 300 Multiprocess can weld materials up to 3/8 inch thick. It can go just about anywhere and run on just about any input power, single-phase or three-phase. Auto-Line™ senses input voltage and phase and instantly adjusts the welder to the optimal operational settings without manual linking. The simplified user interface with large 4.5 inch LCD display helps ensure proper weld parameters for your job. The Pro-Set™ mode eliminates the guesswork from set up by automatically choosing the most common weld settings for your application.
When using a water-cooled TIG torch, the 300 Multiprocess utilizes Cooler-On-Demand™ technology to save energy and prolong the life of your optional TIG torch and Miller Coolmate™ 1.3 cooler. It also comes standard with CPS (Coolant Power Supply), an integrated 120V dedicated outlet for running your Coolmate water circulator.
IP23 rating This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.
Pipe and tube fabrication
Maintenance and repair
For MIG welding when paired with an OPTIONAL Miller voltage sensing feeder.
Ensures proper machine setup and parameter selection
Informative on-screen explanations and dynamic images enhance the parameter selection process
Including advanced waveforms and wide ranges of balance and frequency.
Reduces heat input; adds arc stability.
Provides the ability to easily update software, back-up settings and transfer saved weld programs from one unit to the next.
Allows easy naming, saving and recalling of favorite weld settings.
Deliver more productivity by eliminating the need to manually set the parameters
Deliver consistent quality by welders of all skills
Provides control of weld parameter ranges minimizing deviation from the welding procedure specification (WPS).
Eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse, and DIG parameters.
Provides state-of-the-art flexibility by automatically connecting to 208-575 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure.
Arc starting provides x-ray clean welds without the use of high frequency.
High-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity.
Operates the auxiliary cooling system only when needed, reducing noise, energy use, and airborne contaminants pulled through the cooler.
Fully compatible with Miller wireless remote control solutions
This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.
AC TIG Features
Controls the amount of heat going into the weld to minimize warping or distortion, especially on thin material.
Controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
Controls the width of the arc cone and the force of the arc.
DC TIG Features
Controls the amount of heat going into the weld to minimize warping or distortion, especially on thin material
For welding exotic materials.
Square provides a fast freezing puddle for ultimate arc control.
Sine produces a reduced audible sound and provides a more fluid puddle that is good for overlaying applications.
Triangular provides a quick-forming puddle while further reducing heat for thin materials.
Gives this unit MIG process capabilities with ArcReach® Suitcase® 12 voltage sensing feeder.
The feeder is powered off of the arc voltage of the power source and can run both solid and flux-cored wires
Stick Features (AC/DC)
Allows the arc characteristic to be changed for specific applications and electrodes.
Smooth running 7018 or stiffer, more penetrating 6010.
Adaptive control provides positive arc starts without sticking.
Adds stability for smoother welds when AC Stick welding.
Detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.
Comes complete with
Get a FREE Optrel® Panormaxx CLT Black/e3000x Powered Air Purifying Respirator with the purchase of this Miller® Dynasty® 300 welder. While supplies last. (No substitutions allowed.)
Optrel® e3000x PAPR With Panoramaxx CLT Black Welding Helmet 4550-580
The Optrel® e3000x PAPR (Powered Air Purifying Respirator) with Panoramaxx CLT Black welding helmet filters 99.8% of welding particulates, smoke, aerosols and dust to create a cleaner, healthier work environment under the hood. The e3000x HEPA filter carries a TH3 rating, which means you are getting the highest class of protection available in a PAPR system. The blower unit itself weighs less than 3.5 pounds and comes complete with lithium ion battery that provides up to 18 hours of operation between charges.
Certified to the highest level of respiratory protection in its class, TH3 (HEPA), the e3000X filters and removes 99.8% of harmful solid and liquid airborne particles to deliver clean, filtered breathing air. With the e3000X PAPR system, you complement your optrel PAPR welding helmet with a respiratory protection system, which makes no compromises in matters of safety, health and comfort. Compared to the best in class filter mask (class FFP3), this increases the safety of the user by a factor of ten or even by a factor of 40 when using FFP2 masks.
Complete system comes with e3000x blower motor with hose, TH3 HEPA filter, pre-filter, spark arrestor, battery with charger, belt, Panoramaxx welding helmet with face seal and carry case.
The Optrel® Panoramaxx CLT Black auto-darkening welding hood features Crystal shade 2.0 light state that is unmatched in the world for color and clarity and provides up to 6X the viewing area of a standard 2" X 4" auto-dark welding lens. The key to this revolutionary technology is the size and shape of the ADF, coupled with the unique Panoramaxx shell design, which allows the welding lens to be positioned closer to your face. The Panoramaxx also has advanced features like SHADETRONIC®, which automatically adjusts the shade level based on the brightness of the arc and True Color, which allows for realistic color perception in light or dark states.
The Panoramaxx CLT has a built-in rechargeable battery that does not need replacing. The battery is charged through arc light or when manual charging is necessary, a micro USB charging port. It comes complete with micro USB cable, helmet bag and Oprel's 2+1 warranty.
Comes complete with
80 Cubic Foot Inert Gas Cylinder for Argon(75%)/CO2(25%) and Argon