ESAB® Rebel™ EMP 285ic MIG/TIG/Stick Welder 0558102554
The ESAB® Rebel™ EMP 285ic is a 300 amp MIG, DC TIG, and Stick welder that can run up to 1/16 diameter welding wire. It operates off of standard household 120 volt OR 230 volt input power and weighs only 70 pounds. It comes complete with everything you need to start MIG or Stick welding, except the shielding gas. It is capable of DC TIG welding with OPTIONAL TIG torch. The Rebel 285ic EMP accepts 4 inch (2 pound), 8 inch (10 pound) and 12 inch (33 pound) spools of MIG welding wire and comes with a 4 roll drive system.
Rebel's advanced, welder-inspired design sets it apart from all other multiprocess welders on the market. ESAB starts with sMIG technology that actually adapts the MIG arc characteristics to your unique welding style. Should you change your technique while welding, sMIG will automatically adjust on the fly. The 285ic has exceptional lift-arc DC TIG performance down to 5 amps. Smooth, stable Stick welding arc performance is consistent even on difficult-to-weld E6010 and E7018 electrodes. Combine all of this with a bright, bold 4.3 inch LED color display and you've got a go anywhere, do anything multiprocess welder that is second to none.Processes
Flux Cored (FCAW)
DC TIG (GTAW) (with OPTIONAL TIG torch)
Industrial and General Fabrication
Industrial Production & Manufacturing
Repair and Maintenance
MULTI-PROCESS MIG, Flux-Cored, DC TIG, & Stick
Professional-grade MIG performance, including
flux-cored with wires up to 1/16 inch diamter
Exceptional Lift Arc DC TIG performance down to 5 amps
Excellent Stick performance, including 6010/6011
cellulosic and 308L electrodes up to 5/32 inch diameter
Compatible with OPTIONAL spool gun for welding aluminum
UNMATCHED PORTABILITY - weighing in at 70 lbs. with dual voltage capability and 4 handle
POWER TO PERFORM - have the confidence
with Rebel 235ic to run the full range of .045 in.
(0.9 mm) wire in short arc and spray transfer.
Also up to .052 in. (1.3 mm) solid wire and up
to 1/16 in. (1.6 mm) cored wire. Plus, TIG rods up to
3/16 in. (5.0 mm)
Exclusive, built-in dynamic arc control that
constantly monitors complex arc characteristics
adapting to your technique to provide a smooth,
stable arc and superior, repeatable welds
Produces less spatter and weld defects
Two modes - basic and advanced - Basic mode reduces the MIG learning curve: set wire diameter and material thickness and you're ready to weld. Advanced mode gives full control to adjust the
arc characteristics to your liking
Runs on 120V-230V single-phase input power
Top-level performance across all processes - even
on 120V power
Auto-detect knows what type of input power the
machine is connected to
LARGE, 4.3-INCH COLOR SCREEN
Intuitive LCD/TFT display
4 programmable memory
locations for each welding process
Well protected by front handles and a hefty
Easily switch from one process to the next
Built-in on-screen manual, spare parts listing,
and welding parameters guide
Multi-lingual capabilities, including English, French,
RUGGED CASE DESIGN
Four-handle roll cage for easy transport and handling
Steel unibody housing for increased protection and
Recessed body panels for increased strength
NOTE: The Rebel EMP is a DC TIG welder only. It CANNOT TIG weld aluminum.
ESAB's industry-leading service and support means that if you do need help, you will be
protected by the most comprehensive warranty in the business.
100% SATISFACTION GUARANTEE.
If there's anything, and we mean anything, you are not completely happy with in
your first 100 days with your machine, ESAB will make it right, or your money back.
Comes complete with
ESAB® Rebel™ EMP 285ic MIG/TIG/Stick welder
15 ft.Tweco® SprayMaster Velocity 250V MIG gun
Victor® argon flowmeter regulator
12.5 ft. (3.8 m) gas hose
Electrode holder with leads
Ground clamp with leads
Drive rolls: .035-.045 smooth (solid wire - installed), .052-1/16 VK (flux-cored wire)
2 extra contact tips
1 extra MIG nozzle
120V/230V power adapter
11 lb. spool .035 E70S-6 MIG welding wire
ESAB Atom Arc 7018 electrodes
FREE Optrel® Neo p550 auto-darkening welding helmet ($240.00 MSRP value).
Get a FREE Optrel™ Neo p550 auto-darkening welding helmet ($240.00 MSRP Value) with purchase of an ESAB® Rebel™ EMP 285ic multi-process welder. Expires 3/31/21. (No substitutions allowed.)
Optrel® Neo p550 Welding Helmet 1007.000
SHADE LEVEL 4 / 9 - 13 - With a seamless shade level adjustment
from DIN 9 to 13, the
optrel neo p550
is the perfect solution for all popular
TRUE COLOR VIEW - The specially developed UV/IR filter
allows a realistic perception of colors,
at long last bringing color into the
world of the welder. TRUECOLOR passes more colors of the spectrum through compared to standard "green" spectrum welding lenses.
SENSITIVITY ADJUSTMENT - allows operator to infinitely change lens switching sensitivity for varying ambient light conditions or outdoor welding in sunlight.
DELAY FUNCTION - After shutdown of the welding arc,
the ADF momentarily stays closed to
protect eyes from the strong afterglow
of the welding seam.
LIGHTWEIGHT - Weighing only 17.4 ounces, the
is one of the lightest auto darkening
welding helmets available. Its ergonomic
design minimizes strain on the head
and neck, ensuring comfort throughout
the work day.
NEW ENERGY CONCEPT - With its radically more energy efficient
electronic system including a "Super-Sleep-Mode" the
to use for approximately 3,000 hours
without changing batteries.
EXTERNAL LENS CONTROLS include infinite shade 9 to 13 adjustment, delay and infinite sensitivity adjustment.
Comes complete with
2 year warranty
This item ships Free via standard ground shipping within contiguous U.S.