Home  //  MIG Guns And Parts  //  Miller MIG Guns And Parts  //  Miller M-150 MIG Gun - 10 Foot 249039

Miller M-150 MIG Gun - 10 Foot 249039

Code: 249039
Miller M-150 MIG Gun - 10 Foot 249039
Cyberweld Price: $190.60
Mfg Industrial Price: $285.86
(You Save:  $95.26)
Length: 
QTY:
FAST & FREE SHIPPING
Availability: Usually ships the next business day



Miller® M-150 MIG Gun - 10 Foot 249039

Genuine Miller® M-150 10 foot MIG gun. The M-150 is rated at 150 amps at 100% duty cycle using CO2 shielding gas. It is compatible with all current Miller wire feeders, Millermatic® MIG welders and Multimatic™ 215 multi-process welders. The M-150 comes ready to feed .030-.035 diameter MIG welding wire.



Features
  • Direct replacement for the Miller® M-15 MIG gun
  • M-Series welding guns are an ideal match for Miller® integrated MIG welders or other Miller wire feeders.
  • Three-piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter.
  • Brass contact tip adapter helps prevent galling, sticking and stripping of threads.
  • Single-piece high-impact handle is almost indestructible with ergonomic design.
  • Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
  • 360-degree rotatable gooseneck permits trigger activation with either the finger or thumb
  • Optional adapter kits are also available that enable M-Series guns to adapt to other brands of welding equipment.


    Miller® MIG guns are warranted against defect for 90 Days - parts and labor.

    This item ships Free via standard ground shipping within contiguous U.S.



  • Miller .024 MIG Consumable Kit 234607
    Code: 234607
    Genuine Miller .024 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with Millermatic MIG welders.
    Mfg Industrial Price: $33.75Cyberweld Price: $31.50

    2 Reviews

    Availability: Usually ships the next business day


    Wire Diameter: 
    Miller .030 MIG Consumable Kit 234608
    Code: 234608
    Genuine Miller .030 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with smaller Millermatic MIG welders.
    Mfg Industrial Price: $33.06Cyberweld Price: $30.85

    21 Reviews

    Availability: Usually ships the next business day


    Wire Diameter: 
    Miller .035 MIG Consumable Kit 234609
    Code: 234609
    Genuine Miller .035 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with smaller Millermatic MIG welders.
    Mfg Industrial Price: $32.83Cyberweld Price: $30.65

    11 Reviews

    Availability: Usually ships the next business day


    Wire Diameter: 

    31 Questions & 30 Answers
    Bob
    from Waverly Iowa asked:
    November 13, 2019
    Will this 10ft lead fit my millermatic 185

    I dont want a 15ft lead

    1 Answer
    Miller® M-150 MIG Gun - 10 Foot 249039 will fit the Millermatic 185.
    Submitted by: CYBERWELD on November 13, 2019

    Rick T
    from Pinehurst NC asked:
    November 8, 2019

    I have an older Millermatic 185 and need to replace the gun. The end that goes into the machine measures close to 2.75 inches total and I can't find one that is that long. I purchased a new one, but it didn't fit all the way in the machine, thinking I wasn't doing something right, I put the old one back in and it slipped right in place.

    Can you help?

    Thanks,

    RIck

    1 Answer

    Miller® M-150 MIG Gun - 15 Foot 249041 is a direct replacement for the original M-15 gun that came with the Millermatic 185.
    Submitted by: Cyberweld on November 11, 2019

    jerry o
    from ottumwa iowa asked:
    April 6, 2019
    will this work on a miller 140 auto set
    1 Answer
    Miller M-150 MIG Gun - 10 Foot 249039 will work on a Millermatic 140.
    Submitted by: Cyberweld on April 9, 2019

    John D
    from Clarksville, Arkansas asked:
    November 23, 2018
    Will this work on an old millermatic 30a, style no. HK-36, Serial no.HK-039654
    1 Answer
    Miller advises they do not have a gun that will work with your machine. The Bernard MIG Gun - 150 amp Q-Gun Q1510AB8BM will fit your machine.
    Submitted by: Cyberweld on November 28, 2018

    sean
    from miami asked:
    May 1, 2017
    will this work for millermatic 180
    1 Answer
    Yes, the Miller M-150 MIG gun will work on your Millermatic 180.
    Submitted by: Customer Service on May 1, 2017

    Luke
    from Detroit Michigan asked:
    March 21, 2017
    Will this work with a millermatic 130
    1 Answer
    The Miller M-150 MIG Gun 249039 can be installed on a Millermatic 130.
    Submitted by: Customer Service on March 21, 2017

    Tom
    from Southern Nevada asked:
    February 22, 2017
    Is the Miller M-150 12 foot Mig Gun compatible with the new Millermatic 211 Auto set?
    1 Answer
    If you have an older model Millermatic 211 (stock # 907422) then the Miller M-150 MIG Gun 249039 will fit but Miller advises against using this gun with this model. If you have the newer Millermatic 211(stock #907614) than you can use the Miller M-150 MIG Gun 249039 without any problems.
    Submitted by: Customer Service on February 23, 2017

    Timothy
    from Dallas, TX asked:
    September 27, 2016
    Will this gun work with the Miller 215? Thinking of buying both.
    1 Answer
    The Miller M-150 MIG Gun 249039 can be used with the Multimatic 215. The 249039 is a 10 ft version of the M-150 gun. The M-150 is also available in a 12 ft length 249040, or a 15 ft length 249041.. All versions will work with the Multimatic 215.
    Submitted by: Customer Service on September 28, 2016

    Dylan
    from Ohio asked:
    June 20, 2016
    Will the gun in 15' work for my 211
    1 Answer
    If you have an older model Millermatic 211 (stock # 907422) then the Miller M-150 MIG Gun 249039 will fit but Miller advises against using this gun with this model. If you have the newer Millermatic 211(stock #907614) than you can use the Miller M-150 MIG Gun 249039 without any problems.
    Submitted by: Customer Service on June 21, 2016

    Billy
    from Big bear California asked:
    May 22, 2016
    Can I use this with a Millermatic 251?
    1 Answer
    The Miller M-150 MIG Gun 249039 can be installed on a Millermatic 250 however the M-150 mig gun is only rated at 150amps. The Millermatic 250 is capable of producing 250amps.. If you use the M-150 with the Millermatic operating at full output it will cause the M-150 to fail prematurely
    Submitted by: Customer Service on May 23, 2016

    Steve Hyams
    from Corona, CA asked:
    February 16, 2016
    Can I replace just the cord and trigger assembly (item 13 on the gun schematic) for a Millermatic 185.....the wire broke off in the electrical connection that attached to the welding machine rather than buying a new gun?
    1 Answer
    If the trigger cord on your Miller M-150 MIG Gun 249039 is still good you can purchase the replacement end that plugs into the machine.The part # for this item is 079878 and it is priced a $15.58.. We do not stock this item but we can special order it.
    Submitted by: Customer Service on February 16, 2016

    Kevin
    from Westminster md asked:
    December 25, 2015
    Can I use this on my Miller matic 200 ?
    1 Answer
    The Miller M-150 MIG Gun 249039 will fit and work on your Millermatic 200. However this gun is only rated at 150 amps. Your Millermatic is capable of producing 200 amps.. If you run your machine at 150 amps or above you can overheat the M-150 gun and eventually shorten the life of the gun
    Submitted by: Customer Service on December 29, 2015

    Dustin
    from Los Angeles asked:
    December 9, 2015
    Will this gun fit a Miller 22A Wire Feeder? Thank you
    1 Answer
    The Miller M-150 MIG Gun 249039 can be installed on a Miller 22A feeder
    Submitted by: Customer Service on December 9, 2015

    Wayne Powell
    from Lake Havasu, AZ. asked:
    May 4, 2015
    Can the15 foot #249041 be used with the Miller DVI? I was told by Miller that this would work. Basically trying to extend my work cable to 15 Feet. Thanks.
    1 Answer
    The Miller M-150 MIG Gun 15 ft 249041 will physically fit on your Miller DVI and will function.. The problem is the DVI was designed to use a 10 ft mig gun.. Although the 15 ft gun will work on your DVI the extra length may cause wire feeding problems and also put extra strain and wear on the drive system..
    Submitted by: Customer Service on May 5, 2015

    Robert
    from tecumseh, mi asked:
    April 28, 2015
    Will the Miller M-150 249041 15' gun work on a Millermatic 210? We currently use the 249039 with no problem but I understand there may be some problems when using a 15'.
    1 Answer
    The Miller M-150 MIG Gun 15 ft 249041 will physically fit on your Millermatic 210 and will function.. The problem is the 210 was designed to use a 12 ft mig gun.. Although the 15 ft gun will work on your 210 the extra length may cause wire feeding problems and also put extra strain and wear on the drive system..
    Submitted by: Customer Service on April 28, 2015

    Jerry
    from Spain asked:
    April 4, 2015
    Will this gun work on the millermatic passport plus? Will it plug in directly into the socket on the machine? I have sometimes found that the original gun cable is just a bit too short for some jobs I do with it.
    1 Answer
    The Miller M-150 MIG Gun can be installed on a Miller Passport Plus..
    Submitted by: Customer Service on April 6, 2015

    phil
    from nazareth pa asked:
    October 7, 2014
    will this work on an old millermatic 200 serial no.ka838138 thanks
    1 Answer
    The Miller M-150 MIG Gun 249039 will fit and work on your Millermatic 200. However this gun is only rated at 150 amps. Your Millermatic is capable of producing 200 amps.. If you run your machine at 150 amps or above you can overheat the M-150 gun and eventually shorten the life of the gun
    Submitted by: Customer Service on October 8, 2014

    James L Giordano
    from Arma ' Kansas asked:
    July 1, 2014
    will this fit my hobart 210 mig welder with a 15ft lead wire
    1 Answer
    The Miller M-150 MIG Gun 249039 will not fit on the Hobart Handler 210.Hobart does not recommend installing a mig gun longer than 10 ft on this machine.. The extra length may cause wire feed problems and could also shorten the life of the drive motor
    Submitted by: Customer Service on July 2, 2014

    Doug Wallace
    from Porter, Texas asked:
    June 22, 2014
    what's the difference between this gun and the M 100 besides hose lenth?
    1 Answer
    The Miller M-150 MIG Gun 249039 is rated at 150amps.. The Miller M-100 MIG Gun is rated at 100 amps.. Although these guns use many of the same parts the the M-150 gun uses a heavier (thicker) cable which allows it to dissipate heat better than the M-100 and thus it has a higher amperage rating
    Submitted by: Customer Service on June 23, 2014

    Jerry
    from Phoenix Az. asked:
    May 28, 2014
    Will this M-150 MIG gun fit a Millermatic DVI?
    1 Answer
    The Miller M-150 MIG Gun 249039 can be installed on a DVI
    Submitted by: Customer Service on May 29, 2014

    Robert
    from Tucson, Az. asked:
    May 28, 2014
    Is this the correct replacement gun for an older Millermatic 35 machine, serial number JB483978?? Bolt directly on and go? Do you have pictures of the end that connects to the machine? Thanks, Robert
    1 Answer
    Miller advises that the replacement mig gun for a Millermatic 35 with a JB serial # is the Miller M-25 MIG Gun
    Submitted by: Customer Service on May 28, 2014

    Bryon Mathis
    from vilonia arkansas asked:
    February 18, 2014
    will the 15 ft gun work on a 185 and will there be any trouble with the wire flow
    1 Answer
    The Miller M-150 MIG Gun 249039 is the correct replacement gun for the Millermatic 185.. Based on the information Miller provides you can use a 15ft gun on this model
    Submitted by: Customer Service on February 19, 2014

    Ed Panzella
    from Higganum, Ct asked:
    December 29, 2013
    Will this gun fit a Millermatic 35 from the early 1980's? This question is a duplicate because I capitalized the first letter in my email address on the first copy of this question.
    1 Answer
    Miller advises that the Miller M-150 MIG Gun 249039 will fit on a Millermatic 35
    Submitted by: Customer Service on January 7, 2014

    John Folk
    from Knoxville, TN asked:
    November 16, 2013
    Will this fit a Millermatic 130?
    1 Answer
    The Miller M-150 MIG Gun 249039 can be installed on a Millermatic 130
    Submitted by: Customer Service on November 18, 2013

    Mark
    from Kansas asked:
    August 13, 2013
    Will this work on a Hobart Handler 175?
    1 Answer
    The Miller M-150 MIG Gun 249039 is not recommended for the use with the Hobart Handler 175.. The recommended replacement gun for this machine is the Hobart H100S2-10 MIG Gun 245924
    Submitted by: Customer Service on August 14, 2013

    mike
    from willoughby ohio asked:
    August 12, 2013
    will this gun fit a miller 150
    1 Answer
    The Miller M-150 MIG Gun 249039 can be installed on a Millermatic 150
    Submitted by: Customer Service on August 13, 2013

    jack
    from philadelphia asked:
    June 18, 2013
    Will this gun fit a millermatic 175 machine?
    1 Answer
    A Miller M-150 MIG Gun 249039 or a M-100 mig gun can be used on the Millermatic 175
    Submitted by: Customer Service on June 20, 2013

    Mike
    from Alabama asked:
    June 11, 2013
    will this Mig gun work on my Miller Matic 185 Ser #LA139117?
    1 Answer
    The Miller M-150 MIG Gun 249039 will work on your Millermatic 185
    Submitted by: Customer Service on June 11, 2013

    JOAN
    from miami fl asked:
    October 25, 2012
    WILL THIS GUN OPERATE ON A MILLER 210

    Corey
    from LC, Louisiana asked:
    August 15, 2012
    Will this gun work on a Millermatic 250?
    1 Answer
    No, the Miller M-150 gun will fit on the Millermatic 252, HOWEVER, it is not rated to handle the welding amperage output that the Millermatic 252 produces. The M-150 will overheat and burn out in a very short period of time. You will also void the warranty of the gun.
    Submitted by: Customer Service on August 16, 2012

    Chris
    from Chicago,IL asked:
    August 14, 2012
    Hi, I have Welder millermatic 211. Can you tell me if this product you are selling will fit my welder? My welder has originally gun with 10' hose. I am looking for something longer.
    1 Answer
    Sorry, while a Miller M-150 gun will fit on your Millermatic 211, the drive motor in the 211 is designed to push wire 10 feet, not 15 feet. If you put a 15 foot gun on your Millermatic 211, you will most likely wear out your wire drive motor prematurely and void your warranty.
    Submitted by: Customer Service on August 15, 2012


    Review Summary
    4.7
    14 Reviews
    5
    79% (11)
    4
    14% (2)
    3
    7% (1)
    2
    0% (0)
    1
    0% (0)
    93% Recommend this product (13 of 14 responses)
    By Ronnie
    Jonesboro ar
    Great price and fast shippimg
    May 14, 2018
    Easy to install made my welder work like new again came with new tips
    By Don
    Midland, SD
    nice gun for light Fab/hobby use
    December 24, 2017
    Fast shipping, and this gun will give a lot of good service in a small shop environment at a decent price.
    By Aaron
    Tracy, CA
    Works Great on my Millermatic 90
    November 6, 2017
    Everything works great. I only wish the gas diffuser was not crimped on. My old gun had a threaded diffuser which could be removed and cleaned. I spent the extra money to get a Miller product in hopes this wouldn't be the case. Other (less expensive) guns also have this feature. This is the only downside I see. Other than that, the product works great.
    ConsGas diffuser is not threaded. It has a crimp connection. Could have saved a lot of money on a generic brand with the same inferior feature. Review would be a 5 if the diffuser was threaded.
    By kevin
    New Iberia, La.
    great for tight spaces
    November 17, 2016
    Have it plugged into a MM251. Only using it for thin sheet metal. works great
    By Lynn
    So Oregon
    M-150 mig gun
    April 13, 2016
    Thank You . . . .
    ProsThank You . . . .
    By Omar
    Ft worth Texas
    Nice experience
    April 8, 2016
    Super fast shipping, definitely will buy more from this website, great prices, highly recommend.
    By Chris
    SoCal
    Same size as the gun that comes with the Miller 211 inverter, but available in 15' version.
    October 25, 2015
    I like the small guns but wanted the 15' version for the new 211. It appears that the model number means it will handle more amperage than the gun that came with the machine, but they look identical and feel the same.
    ProsSmall and easy to hold and maneuver for smaller to medium welds. The trigger feels much nicer than the m10 gun on my old Miller 135 (I wore that trigger out and replaced it once in 15 years). 15' length is great to have, but the ground lead needs to be extended to match.
    ConsThe gun can get warm when welding for long periods or at high settings, but I think a lot of the heat is radiating off the weld and getting my weak hand which I like to steer the gun with. It may be just fine for the 211 on hotter settings, if you can weld well without holding the neck of the gun. The fact that this gun was not a factory option with the Miller 211 inverter that was advertised to be designed to work with 15' guns. Miller has you in a tight spot so you either buy a longer miller gun for close to another $200 (I really like the miller guns) or try another brand which seems to be a choice that about half of people decide to go with. The gun is great, but their marketing and business practice feels like a bit of a stab in the back.............or wallet.
    By "Pete"
    Central Florida
    Miller m150 mig gun
    October 17, 2015
    I replaced a older M15 gun with the new M150 gun. It fit right up and away we go. Miller is the way to go. As for CyberWeld, they're the best also.
    By James C.
    Vacaville, Ca.
    Replacement for my Millermatic 185
    April 1, 2015
    Great price. Was delivered in a just 3 days after ordering. $100 cheaper than my local welding supply store that had to order it as well. When given the opportunity to price match, the store declined.

    Genuine Miller replacement whip and works as you should expect.
    ProsSaved $100. Same service I could get locally. perhaps better. My new whip was delivered to my door. I didn't have to go anywhere to order it and then go back pick it up. Genuine replacement for Millermatic 185. Can't beat the price.
    ConsNone.
    By ED A.
    ONTARIO NY
    welder
    April 7, 2014
    good price shipped fast
    Prosprice
    Consstiff rubber
    By Bryon
    vilonia arkansas
    m-150 15 ft gun
    March 13, 2014
    ilike this this item due to the fact you have a longer reach therefore you dont have to move the machine around
    Prosi do a lot of welding on my race cars would there be a chance of a sponsorship to advertise your business on the side of the cars
    By JAMES K.
    TEXAS
    GREAT WELDING PARTS
    October 8, 2013
    Dear, CyberWeld
    had bought my Miller M-150 Mig welder some 15 years ago great machine but would not weld good beeds for several years. Bought the Miller M-150 Mig Gun 249039 and installed on my machine couldnt beleave how great my welder is welding now!!!!! You delivered my Mig Gun in record time AND Im very Happy With the free SHIPPING!!!!! Thank You Cyber Weld I will be buying more items from you in the near future.
    By David
    Coeur d'Alene, Idaho
    Great upgrade
    September 29, 2013
    Great upgrade over the 10ft mig gun that came with the Miller 211.
    By darrell
    georgia
    m-150
    November 27, 2012
    perfect match for millermatic 35 love it so far

    back
    close menu
    Miller M-150 MIG Gun - 10 Foot 249039 detail
    Miller M-150 MIG Gun - 10 Foot 249039
    WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm www.P65Warnings.ca.gov