Home  //  Specials!  //  Millermatic 190 MIG Welder 907613

Millermatic 190 MIG Welder 907613

Code: 907613
Millermatic 190 MIG Welder 907613+ CLICK IMAGE TO ENLARGE
Cyberweld Price: $969.00
Mfg Industrial Price: $1,228.00
You Save:  $259.00
FREE Fall Promo: 
Availability: Usually ships the next business day
QTY:
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Millermatic® 190 MIG Welder with Auto-Set 907613

The Millermatic® 190 MIG welder is a 190 amp portable MIG welder that runs on 240 volt input current and weighs only 35 pounds. It features inverter technology, which means it draws less power, has a superior welding arc and weighs up to 40% less than other MIG welders in its class. The Milermatic 190 is capable of MIG welding mild steel up to 5/16 inch thick. It features Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).

Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. Manual welding mode must also be used when MIG welding aluminum, stainless steel or for flux-cored welding. The parameter door chart lists voltage and wire feed speed settings options.



Processes
  • MIG (GMAW)
  • Flux Cored (FCAW) (gas and self-shielded)

    Applications
  • Light Industrial Applications
  • Light Fabrication
  • Maintenance and Repair
  • Auto Body
  • Farm/Home



    Features:
  • Auto-Set™ automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters.

    Set the wire diameter, a blue light shows Auto-Set is activated
    Dial in the thickness of what you are welding
    Start welding with the exact parameters you need!

  • Miller inverter technology combines best-in-class arc characteristics with the portability of a 35-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds
  • Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
  • Quick Select™ drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.
  • Auto Spoolgun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
  • Smooth-Start™ provides a smooth, spatter-free start. It is the best-starting machine in the small MIG machine category.
  • Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.
  • Uses 4 inch or 8 inch (102 or 203 mm) spools and can be set up to weld with .024 to .030 inch (0.6 to 0.8 mm) solid wire and .030 to .035 inch (0.8 to 0.9 mm) flux-cored wire.

    Specs





    Comes complete with:
  • Millermatic® 190 MIG Welding Power source
  • 6.5-ft. (2 m) power cord with plug
  • 10-ft. (3 m), M-100 MIG gun and cable assembly
  • 10-ft. (3 m) work cable with clamp
  • Argon - Argon/CO2 mix flow gauge regulator with gas hose
  • Hobart® spool of .030-in. (0.8 mm) solid wire
  • Two contact tips for .030-in. (0.8 mm) wire
  • Quick Select® drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
  • Material thickness gauge #229 895
  • Velcro cord wraps
  • FREE Miller® Classic Black auto-darkening welding hood. (Expires 12/31/17)



    Get a FREE Miller® Classic Black auto-darkening welding helmet ($100.00 MSRP Value) with purchase of a Millermatic® 190 MIG welder. Expires 12/31/17. (No substitutions allowed.)

    Classic Series Features
  • Manual On/Auto-Off circuitry
  • Two independent arc sensors
  • Features magnifying lens holder
  • Extra protective lens covers included



    This item ships Free via standard ground shipping within contiguous U.S.

  • Download Millermatic 190 Spec Sheet (Requires Adobe Acrobat Reader)
    Download Millermatic 190 Spec Sheet (Requires Adobe Acrobat Reader)

    Miller Spoolmate 100 MIG Spoolgun 300371Miller Spoolmate 100 MIG Spoolgun 300371Miller Spoolmate™ 100 MIG Spoolgun 300371


    Availability: Usually ships the next business day

    Code: 300371

    Mfg Industrial Price: $303.00Cyberweld Price: $260.00



    Millermatic Protective Cover 301262Millermatic Protective Cover 301262The Millermatic® protective cover protects the finish of your Millermatic® 141, 190 or 211 MIG welder. Also suitable for Multimatic™ 215 multi-process welders.


    Availability: Usually ships the next business day

    Code: 301262

    Mfg Industrial Price: $52.00Cyberweld Price: $48.99



    Miller Running Gear/Cylinder Rack 301239Miller Running Gear/Cylinder Rack 301239Heavy-duty welder cart/cylinder rack is perfect for small Millermatic and Handler MIG welders and Diversion TIG welders.


    Availability: Usually ships the next business day

    Code: 301239

    Mfg Industrial Price: $191.00Cyberweld Price: $179.99



    Miller .024 MIG Consumable Kit 234607Miller .024 MIG Consumable Kit 234607Genuine Miller .024 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with Millermatic MIG welders.


    Availability: Usually ships the next business day

    Code: 234607

    Mfg Industrial Price: $25.81Cyberweld Price: $23.99

    Wire Diameter: 


    Miller .030 MIG Consumable Kit 234608Miller .030 MIG Consumable Kit 234608Genuine Miller .030 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with smaller Millermatic MIG welders.


    Availability: Usually ships the next business day

    Code: 234608

    Mfg Industrial Price: $25.81Cyberweld Price: $23.99

    Wire Diameter: 


    Miller .035 MIG Consumable Kit 234609Miller .035 MIG Consumable Kit 234609Genuine Miller .035 MIG Consumable Kit for your Miller M-Series MIG gun. Suitable for use with smaller Millermatic MIG welders.


    Availability: Usually ships the next business day

    Code: 234609

    Mfg Industrial Price: $25.81Cyberweld Price: $23.99

    Wire Diameter: 



    12 Questions & 12 Answers
    joe s
    from timberon,nm asked:
    September 7, 2017
    can I use the mvp plug adapter with this welder
    1 Answers
    Millermatic 190 MIG Welder 907613 will not accept the MVP plug
    Customer Service
    on September 26, 2017

    Frank Rus
    from chicago area IL asked:
    November 20, 2015
    Is the price of 896.00 (for a 190 Mig welder 907613) before the Rebate or after Rebate
    1 Answers
    Millermatic 190 MIG Welder 907613 is priced at $896.00 before the rebate
    Customer Service
    on November 23, 2015

    Mark Reese
    from GREENWOOD asked:
    November 16, 2015
    Do I have to use a different liner than the one that comes with it to use .024 solid wire? I see three liner sizes available for this machine. Can a liner be reinstalled after it has been removed from a gun and hose?
    1 Answers
    The Millermatic 190 MIG Welder 907613 comes with a standard with a .030 to .035 liner.In most cases you can run .024 wire through this liner. If you are going to run .024 on a regular basis you may what to install a .024 liner. The .024 wire will run smoother with .024 liner and it will help prevent the wire from binding inside the liner.All three liner sizes can be installed in the M-100 gun that comes with the machine. Liners can be removed and reinstalled as needed.
    Customer Service
    on November 16, 2015

    Andres
    from Tomball, tx asked:
    July 15, 2015
    Is this machine capable of using the multi voltage plug? Like the millermatic 211
    1 Answers
    The Millermatic 190 MIG Welder 907613 is a 220 volt machine only and it cannot use the multi voltage plugs
    Customer Service
    on July 16, 2015

    E.
    from Virginia asked:
    June 19, 2015
    May I use .035 solid wire with th auto set feature
    1 Answers
    The Auto Set feature on the Millermatic 190 MIG Welder 907613 will not work with .035 wire
    Customer Service
    on June 22, 2015

    Slava
    from Chicago asked:
    April 27, 2015
    What power generator do I need?
    1 Answers
    If you are going to run the Millermatic 190 MIG Welder 907613 off of a generator you will need a generator that is 3.8 KW or larger
    Customer Service
    on April 28, 2015

    Tom
    from Michigan asked:
    April 14, 2015
    Will it run on 220 ? perform the same as 240 ?
    1 Answers
    The Millermatic 190 MIG Welder 907613 is an inverter based welder. It will perform the same on 220 as it does on 240.. It will have a slightly higher input power draw on 220 volt as compared to on 240 volt.
    Customer Service
    on April 15, 2015

    FRED KUNTZ
    from DES MOINES, IOWA asked:
    April 7, 2015
    I AM 92 YEARS OLD AND I DO NOT HAVE A CREDIT CARD. DO YOU HAVE A WAY TO INSTANTLY CHECK PERSONAL CHECKS WITH THE BANK? OR DO YOU ACCEPT MONEY ORDERS? MY SON COULD USE HIS CREDIT CARD. PLEASE ADVISE. NEED YOUR ADDRESS
    1 Answers
    If you want to purchase a machine like the Millermatic 190 MIG Welder 907613 by check or money order you will need to place your order by phone. We will generate your order and provide you with an order number.. You would then send us a check /money order with the order number written on the check/money order. When we receive the check/money order we will wait until the check/money order clears. Once it clears we will ship your order
    Customer Service
    on April 8, 2015

    fred kuntz
    from des moines, iowa asked:
    April 5, 2015
    if I buy millermatic 190 for $896.00 and buy spoolmatic 100 for $246.00---total$1142.00 do I get $200.00 rebate?
    1 Answers
    If you purchase the Millermatic 190 MIG Welder 907613 and the optional Miller Spoolmate 100 MIG Spoolgun 300371 you would qualify for the $200.00 rebate
    Customer Service
    on April 6, 2015

    Mike
    from Canada asked:
    January 28, 2015
    Which type of receptacle do I need for this welder? (can you provide a part#?)
    1 Answers
    The Millermatic 190 MIG Welder 907613 uses a NEMA 6-50 plug.. We do offer the Cooper Primary Power Receptacle - 230 Volt NEMA 6.50R 1252 ($16.87) which can be used with the 190.
    Customer Service
    on January 29, 2015

    Sean
    from Rochester NY asked:
    December 18, 2014
    In the description of this welding machine it's said that it can weld up to 5/16" steel plate and I am assuming this means welding with flux cored wire. My question is does this machine weld up to a max thickness of 5/16" on a single weld pass or does this mean it can weld steel this thick doing multiple passes? If this welding machine cannot weld up to 5/16" steel on a single weld pass then what is the max steel thickness that the miller 190 can weld on a single weld pass?
    1 Answers
    The Millermatic 190 MIG Welder 907613 can weld up to 5/16" thick using solid wire with a shielding gas or with flux cored wire.. It can weld thicker using multiple passes
    Customer Service
    on December 19, 2014

    Bob Cain
    from bobbysabine@hotmail.com asked:
    November 12, 2014
    How do I find out what the ($100) qualifying additional products are if I buy a 190 mig welder? Also what would be the the rebate from Miller during their promo?
    1 Answers
    In order to participate in the Miller rebate program for the Millermatic 190 MIG Welder 907613 you will have to purchase the machine for $895.00. On this same order you will have to also purchase $100.00 of Miller family accessories. This can be any item including machines branded Miller, Hobart, Weldcraft, Smith, or Bernard . Any item.. Welding helmets, gloves, welding wire, torches, tips, nozzles. Any item. .Once you have made this purchase you will need to fill out the Miller rebate form and send it to Miller along with a copy of your purchase receipt. Miller will send you a check for $100 within a few weeks. Basically you receive the accessories for free .. There is no rebate discount on the price of the Millermatic 190
    Customer Service
    on November 12, 2014


    5.0
    12 Reviews
    5
    100% (12)
    4
    0% (0)
    3
    0% (0)
    2
    0% (0)
    1
    0% (0)
    100% Recommend this product (12 of 12 responses)
    By Ernie
    Chambersburg Pa
    October 20, 2017
    Great welder for the price
    The price was great and the free helmet that came with it is better than any other I have used.
    By Jeff S.
    Michigan
    June 21, 2017
    Millermatic 190
    Best deal around... really quick shipping and awesome products... You want a welder to do it all, I highly recommend the 190.
    By EJC
    Okc ,ok.
    April 17, 2017
    Great welder
    Machine works flawlessly. Cyberweld, very easy to do business with.
    By Jesse
    Diamondhead,MS
    March 26, 2017
    I love it
    I am a homeowner and hobbyist welder. I have a few projects coming up for the Miller 190 to include welding Ramps for a gooseneck trailer. I have the initial welds just to set it up. Then grabbed some old saw blades and welded them together. They are about 1/8 thick. I have never used the auto set feature so I dialed it in according to the Miller preferred settings. It welded perfectly. I also attempted to get the machine warm but I could not get the temp light to come on. I welded 4 runs on a high enough setting that it was about to melt through the saw blades at a moderate pace. The runs were over 7" long and heavy. The light never came on. It just laid it down! I would highly recommend this Miller 190. The uses for this machine wouldn't include industrial welding though. If I wanted to do some heavier steel I would recommend the 252. Bang for the buck on lighter steel i.e. 1/4 and below Miller 190.
    By Steven S.
    Kutztown, PA.
    July 24, 2016
    Great Machine
    First use was for my Aluminum Spool gun. Ran perfectly.
    By Jay R.
    Destrehan, la
    January 13, 2016
    Great machine
    Leads could be a little longer, but it welds amazingly.
    By Wayne
    Leland, MS
    November 30, 2015
    A Quality Built Machine
    Order was shipped complete and it arrived in a timely manner. Instructions were complete and it was easy to assemble.
    ProsQuality construction. Light weight and quite.
    By Gary
    United States
    April 16, 2015
    Nice heavy duty welder but light in weight
    It's my first 220V mig welder and I'm certainly impressed with it's ability to weld heavy metals.
    ProsEasily set up. Instructions were good.
    Consthe auto set feature seems to feed the wire too fast. It just might be taking some getting used to
    By Jeff
    Hayden, Idaho
    March 30, 2015
    Millermatic 190 - I LOVE THIS MACHINE
    I love this welder. Smooth, clean, and consistent welds. It is compact and light weight but offers plenty of power. I wish I had pulled the trigger and purchased this last year. I have been asking every one I know for welding projects just to have a reason to us it. Long torch assembly gives you plenty of reach.
    ProsPlenty of Power for its class Smooth Arc Consistent Wire Feed Light Weight Affordable
    By Eric
    Knoxville TN
    January 22, 2015
    Unbelievable difference
    I bought this welder to upgrade from a 110v unit, where I kept running up against the duty cycle. I had been looking at good quality MIGs for awhile and when I saw this 220v autoset unit come out with inverter based technology, I jumped on it...and I'm so glad I did!!! I haven't stopped welding with this machine since I got it. On Saturday, I purposely pushed it HARD...I was welding sides in a trailer, and welded for 2 hours straight with no more than 10 minutes of down time...this welder never missed a beat, and the overtemp light never came on, despite me pushing it hard on purpose. Not only that, but the quality of welds with this machine ate so much better than the unit it replaced.
    ProsAutoset works great, lightweight, extremely forgiving, exceptional duty cycle...and a great value through CyberWeld!!
    ConsNone at all
    By Bruce
    Marietta, GA
    December 18, 2014
    Easy setup
    Set up went fast and the unit welds as I expected it to. The lighter weight of this unit allows me to be mobile if a family member or friend needs something repaired. I've used both the auto-set and manual functions and can see very little, if any, difference in the finished welds. This unit is a replacement for an older 180 with only 5 fixed heat settings. This does a superior weld on auto-set yet it allows me more control in manual mode if I'm welding different thicknesses of metal.
    ProsWeight is the primary plus for me.
    ConsNone
    By Phil
    Salt Lake City, Utah
    December 10, 2014
    This is almost like cheating!
    I'm by no means an experienced welder. But this welder almost makes me look like one. It starts very politely and the the weld flows like cream.
    ProsSmall Light Fan only comes on as needed Changing wire sizes is a two minute job The arc is very tolerant of changes in stick out
    ConsNone

    back
    close menu
    Millermatic 190 MIG Welder 907613 detail
    Millermatic 190 MIG Welder 907613