29 Questions &
27 Answers
Michael
from Boaz, Alabama asked:
May 4, 2019
Does this machine come with auxillary plug-in jacks ex. 120v/240v, if so, what kind and how many? thanks
1 Answer
Jimmy Allen
from Bainbridge,ga 39819 asked:
August 15, 2017
Where is the Miller bobcat 250 efi manafactured?
1 Answer
The Miller Bobcat 250 EFI is manufactured in the United States.
Submitted by:
Customer Service
on August 31, 2017
Most Helpful Answer
Brandon
from SAN Antonio asked:
February 10, 2017
will this generator be good enough to run a plasma cutter?
1 Answer
The Miller Bobcat 250 EFI can run a plasma cutter as long as it will not draw more than 12,000 Watts at peak and 10,500 Watts continuous. If you can provide us with the make and model of your plasma cutter, we would be happy to look into it for you.
Submitted by:
Customer Service
on March 1, 2017
Most Helpful Answer
ca
from mt asked:
January 24, 2017
does it come with leads
1 Answer
No, the Bobcat 250 EFI does not come with leads.
Submitted by:
Customer Service
on January 24, 2017
Most Helpful Answer
Francis Roberts
from SC asked:
November 5, 2016
Need a welder that has a charging system of 24 volts for my skyhook crane. Can you advise which Bobcat models does this?
2 Answers
Miller advises that the Bobcat models will not be sufficient for your needs. They would recommend the Trailblazer 325 instead.
Submitted by:
Customer Service
on December 8, 2016
Most Helpful Answer
Miller advises that the Bobcat models will not be sufficient for your needs. They would recommend the Trailblazer 325 instead.
Submitted by:
Customer Service
on December 8, 2016
Most Helpful Answer
brent matis
from lousiana asked:
August 10, 2016
how do I pick what motor I want in the bobcat 250
1 Answer
The Miller Bobcat 250 EFI Welder 907502 is only available with the Kohler ECH 730 engine.
Submitted by:
Customer Service
on August 11, 2016
Most Helpful Answer
Eric Spendlove
from Las Vegas NV asked:
June 30, 2016
What are the details for the $1200 mail in rebate if I buy this machine?
1 Answer
If you purchase the Miller Bobcat 250 EFI Welder 907502 you are immediately eligible for a $1000.00rebate.. You can receive and additional $200.00 rebate but you are required to purchase an additional $500.00 in Miller accessories. These accessories can be anything in the Miler family. Welding helmets, Cutting Torches, Gloves,Tig accessories Etc. Even another machine.
Submitted by:
Customer Service
on July 1, 2016
Most Helpful Answer
John
from San Antonio asked:
June 10, 2016
Weldersupply has this unit for 4,479. Will you match/beat that price?
1 Answer
Sorry but we do not price match..
Submitted by:
Customer Service
on June 13, 2016
Most Helpful Answer
Robert Lenning
from maryland asked:
May 15, 2016
Does this unit come with a GFCi? I see its been asked already with no answer. the other 250 bobcat carb model has an option for it...plz advise
1 Answer
The Miller Bobcat 250 EFI Welder 907502 is not available with factory installed GFCI. A GFCI field installed option #300975 is available. You would have to install this option yourself or have it installed by a authorized Miller service faciltiy
Submitted by:
Customer Service
on May 16, 2016
Most Helpful Answer
Torrey
from Palmer, Alaska asked:
March 28, 2016
Do you ship to Alaska?
1 Answer
We cannot ship a Miller Bobcat 250 EFI Welder 907502 to Alaska
Submitted by:
Customer Service
on March 28, 2016
Most Helpful Answer
jim scott
from modesto calif asked:
February 29, 2016
what mig attachment (suitcase)should I get for this welder
1 Answer
The best feeder for use with the Miller Bobcat 250 EFI Welder 907502 is the Miller SuitCase X-TREME 12VS Wire Feeder 951543.. Or if you want to use only 10 lb spools of wire you can use the Miller SuitCase X-TREME 8VS Wire Feeder 951583.
Submitted by:
Customer Service
on March 1, 2016
Most Helpful Answer
Chris
from Covington Oh asked:
June 5, 2015
Is this price good for the subaru engine
1 Answer
The Miller Bobcat 250 EFI Welder 907502 and all Miller Bobcat models come only with Kohler engines.. The Robin/Subaru engine models have been discontinued,
Submitted by:
Customer Service
on June 5, 2015
Most Helpful Answer
Dane
from Franklin, LA asked:
January 28, 2015
I purchased this Welder from you in March of 2013 and I've had a problem with the hour meter since the first time I Put gas in it. It doesn't always turn on when I crank the machine. I have to let it run for a minute or two then shut it down and crank it back up again to get it to turn on. sometimes I have to do this multiple times before the Meter will turn on. Can you tell me what is causing this? This meter should turn on immediately every time I crank the machine or turn the knob to run/Idle but it doesn't.
1 Answer
Your Miller Bobcat 250 EFI Welder 907502 is covered by Miller's 3 year warranty. We suggest that you first contact Miller and speak to one of their techs about your problem. They may try to trouble shoot this problem with you or they may simply advise you to take it to your nearest Miller authorized warranty facility for warranty repair. You can call them at 1-866-931-9730.
Press #3 for technical support. When the operator answers tell them which model machine you have so they can get you to the right techs
Submitted by:
Customer Service
on January 28, 2015
Most Helpful Answer
Alex C
from Ont Canada asked:
January 9, 2015
Hello, I would like to know what non critical AC Tig mean? It can weld aluminum without adding on a standalone welder box? I'm looking to add one of the miller engine powered as back up power and would like to be able to TIG weld aluminum. What would be my best choice? Thanks.
1 Answer
The Miller Bobcat 250 EFI Welder 907502 does not have remote control capabilities such as a footpedal or finger tip control. This means that when tig welding with the Bobcat you can only control the weld amperage from the front control panel of the Bobcat. You will not have very good control of the weld puddle when operating in this manner thus Miller believes that this procedure should only be used only were the quality of the weld may not be critical (noncritical) to the operation or function of the completed project. In order to tig weld aluminum with the Bobcat you will also need to add a Miller 042388 Hi Frequency Arc Starter $1036.00. Your best bet is to purchase a stand alone AC/DC tig weld that can run off the auxiliary power of the Bobcat
Submitted by:
Customer Service
on January 9, 2015
Most Helpful Answer
Robert
from California asked:
December 17, 2014
I'm looking for an all around welder. Something to weld 1/4" aluminum ,1/2" steel, run a plasma cutter, and use as a backup generator for my home. Which one is best for me? Thanks and merry Christmas
1 Answer
The Miller Bobcat 250 EFI Welder 907502 is not the best choice for your applications. The Miller Trailblazer family of engine driven welders would be a better choice.. You can stick, tig , or mig with a Trailblazer with the proper accessories . You can also mig weld aluminum using a spoolgun. The Trailblazers also produce 10,500 watts of continuous auxiliary power which you can run a plasma machine off of and also power your home
Submitted by:
Customer Service
on December 17, 2014
Most Helpful Answer
Layton
from houston texas asked:
November 9, 2014
Can you tell me what the duty cycle is. I am not understanding what the fuel data consumption vs. specifications for the duty cycle. If i am running 7018 1/8 inch rods what will my duty cycle be? I am looking to purchase this in the next few days. I have researched my options and this one was the best fit for my needs but due to the Duty Cycle issue i am holding back from purchasing this item... So if you could hurry with a quick response that would be great! Thanks
1 Answer
One way of classifying a welder's "size" is by how much amperage it can generate at a given "duty cycle." Duty cycle is the number of minutes out of a 10-minute period a welder can operate. For example, the Dynasty® 350 TIG unit can deliver 300 amps of welding output at a 60 percent duty cycle. It can weld continuously at 300 amps for six minutes, and then must cool down during the remaining four minutes to prevent overheating.The Miller Bobcat 250 EFI Welder 907502 has a 100% duty cycle. This means it can weld all day at the max output (250 amps) without needing to cool down.If you are going to weld with 1/8" 7018 electrode you would generally be running that rod at 110 to 120 amps . Based on the Bobcat fuel consumption chart you would be using approx .8 gallons on fuel / hour
Submitted by:
Customer Service
on November 10, 2014
Most Helpful Answer
Wayne
from Aleandria,La asked:
November 2, 2014
how much tax would be on this item ?
1 Answer
We are only required to collect sales tax on the Miller Bobcat 250 EFI Welder 907502 if it being shipped into New Jersey or Arizonia.
Submitted by:
Customer Service
on November 3, 2014
Most Helpful Answer
Peter
from Atlanta, GA asked:
April 9, 2014
Can the bobcat 250 be used as a power source to power a millermatic 252.
1 Answer
Miller does not recommend running a Millermatic 252 off of a Miller Bobcat 250 EFI Welder 907502.. the largest Mig Welder that can run properly off of a Bobcat 250 is a Millermatic 212
Submitted by:
Customer Service
on April 9, 2014
Most Helpful Answer
Lucius
from Fillmore,California asked:
February 15, 2014
Is there financing available
1 Answer
You can finance the purchase of the Miller Bobcat 250 EFI Welder 907502 through PayPal.. Refer to our FAQ section for complete information..
Submitted by:
Customer Service
on February 18, 2014
Most Helpful Answer
Mike
from Superior WI asked:
July 16, 2013
Will this MIG weld aluminum? What will I need?
1 Answer
The Miller Bobcat 250 EFI Welder 907502 can be set up to weld Aluminum.. If you are only going to use it for light gauge aluminum (up to approx. 150amps) you will need the Spoolmate 3035 spool gun(195016) along with the SGA100c control (043857). If you plan on welding heavier aluminum you will need the Spoolmatic 30 A spool gun (200amps 100% duty cycle) part number 130831 plus the WC115a control (137546011).. A Miller Trailblazer is actually a better choice for welding aluminum with an engine drive welder.. With the Trailblazer you will need the 30A spool gun and a WC24 control
Submitted by:
Customer Service
on July 18, 2013
Most Helpful Answer
David
from Erie Pa asked:
March 16, 2013
Does this welder come with leads for stick welding?
1 Answer
Miller Bobcat 250 EFI Welder 907502 does not come with any accessories. The most popular accessories can be found by following this link:
http://store.cyberweld.com/mibo250efiwe1.html#pdItemDataTabs
Submitted by:
Customer Service
on March 18, 2013
Most Helpful Answer
Dane
from Franklin, Louisiana asked:
January 30, 2013
Can I get delivery on a truck with lift gate service? I have no other way to unload.
1 Answer
Miller Bobcat 250 EFI Welder 907502 will be delivered with a lift gate at no additional charge.
Submitted by:
Customer Service
on January 31, 2013
Most Helpful Answer
Ricardo martinez
from Alton tx 78573 asked:
December 4, 2012
Efi means..?
1 Answer
The Miller Bobcat 250 EFI Welder 907502 has a Kohler engine that uses Electronic Fuel Injection(EFI) instead of a carburetor
Submitted by:
Customer Service
on December 5, 2012
Most Helpful Answer
Rolf Sivertsen
from lacon, il asked:
November 2, 2012
This thing comes with the cables right? How long are the leads?
Rolf Sivertsen
from Lacon, il asked:
November 2, 2012
Does this product have gfci ? If no how much for it?
Rs
harold geist
from denver co asked:
October 27, 2012
Have there been any issues with the EFI
Herbert L
from new windsor N.Y. asked:
August 1, 2012
what do i need for mig gun to run bobcat 250
1 Answer
The best MIG solution for a Bobcat 250 is to pair it up with either a Miller Suitcase X-treme 8VS or 12 VS feedder. These feeders hook up to your Bobcat using standard welding cable and come with MIG guns. You would have to add a gas hose and regulator if you are using gas-shielded MIG or Flux-cored welding wire.
Here's the link to go to the wire feeder section of Cyberweld:
http://store.cyberweld.com/misufe.html
Submitted by:
Customer Service
on August 2, 2012
Most Helpful Answer
bob
from acushnet ma 02743 asked:
July 31, 2012
how much for model # 907504
1 Answer
$4,389.00 for the 907504 Bobcat 250 with Kohler LP engine and GFCI. Free standard ground shipping within contiguous U.S. on this item.
Submitted by:
Customer Service
on August 1, 2012
Most Helpful Answer
Jeremy
from Providence, RI asked:
July 29, 2012
I Have a few questions 1) would you guys beat a competitor's price on this unit, 2) where can i find a list of accessories meant to be used with this machine specifically and what else would I need to purchase so that I can Stick and Tig weld, 3) what else would I need to plasma cut with this unit 4) and what are the limitations and capabilities with this machine when It comes to TIG welding aluminum? Thanks for you help
1 Answer
We do not price match. Please give us a call at (800) 245-9353 and talk to Joe, our applications expert for in depth answers to all your other questions.
Submitted by:
Customer Service
on July 30, 2012
Most Helpful Answer
![Bizrate Circle of Excellence - See [Merchant Name] Reviews at Bizrate.com](https://medals.bizrate.com/awards/vertical/large/228064_coe.gif)
SIGN UP