Miller/Hobart Engine Driven Welder Accessories

Genuine Miller® replacement Wireless Interface Control (WIC) is a handheld unit that controls all weld parameters, stores custom weld settings, displays real time engine status and service intervals, and acts as a remote engine start/stop

Genuine Miller® Bobcat™ 225/260 replacement/spare remote Start/Stop fob decreases cost and helps eliminate noise at the jobsite.

Hobart Welding Cable Set - No. 2, 50 ft. lead with holder and 50 ft. ground with clamp.

Miller Welding Cable Set - 2/0, 50 ft. lead with electrode holder and 50 ft. ground with clamp.

Genuine Miller® 25 foot battery charge/jumper cables for your Trailblazer® 325 EFI with Exel™ Power and built in battery charger.

Miller® Twist Lock Adapter Cord adapts L14-30R twist lock receptacle to NEMA 6-50R 240 volt plug.

Perfect to adapt your 230 volt welder or plasma cutter to the 230 volt "Full KVA" receptacle on your engine driven welder.

Genuine Miller® Spark® Arrestor Kit - Mandatory when operating on California grasslands, brush, or forest-covered land and all National Forests. For Bobcat 225, Bobcat 250 & Bobcat 3 Phase welders Mfg AFTER January 2012.

Miller Bluestar 185 Spark Arrestor for Miller Bluestar 185 welders manufactured AFTER 9/1/2014.

Genuine Miller Spark Arrestor Kit for large, Miller diesel engine welders.

Combination flame arrestor/lockable fuel cap for large Miller diesel welders.

Blue canvas cover for Miller Blue Star 185 welders manufactured AFTER 9/1/2014 and Fusion welders.

Miller protective cover for your gas powered Bobcat® welder manufactured after January 2012 or Trailblazer® welder manufactured after September 2012 without running gear.

Genuine Miller® protective cover for your gas powered Miller engine driven welder with running gear and/or protective cage.

Protective cover for your Miller Bobcat™, Trailblazer® or Legend Welder manufactured BEFORE October 2004

Miller Protective Cover - Bobcat/Trailblazer Diesel 195334

Genuine Miller protective cover for your Bobcat™ 200 Air Pak™ welder without running gear.

Genuine Miller protective cover for your Bobcat™ 200 Air Pak™ welder with running gear.

Miller protective cover for your Bobcat® 250 Diesel or Trailblazer® 325 Diesel welder

Miller® 195353 Lifting Eye Kit easily attaches to your Fusion or Blue Star® 145/185 welder allowing the unit to be lifted by overhead hoist or crane.

Miller® 301246 Running Gear for your Miller Fusion welder or Blue Star® 185 welder manufactured AFTER 9/1/2014.

All Purpose Running Gear with Never Flat tires specifically designed for your Bobcat™ 250 Diesel or Trailblazer® 325 Diesel welder.

Recommended for all surfaces and applications for gas powered Miller Bobcat® or Hobart Champion™ Elite welder manufactured after January 2012, Miller Bobcat® 250 Diesel manufactured after June 2013 and Miller Trailblazer® September 2012

Miller® Multi-Terrain Running Gear with Never Flat Tires is recommended for all surfaces and applications.

Recommended for rugged jobsites for gas powered Miller Bobcat or Hobart Champion™ Elite welders manufactured after January 2012, Bobcat® 250 Diesel manufactured after June 2013 and Miller Trailblazer® welders manufactured after September 2012.

Miller® Off-Road Running Gear with Never Flat tires is recommended for rugged jobsite applications.

Recommended for rugged jobsites for gas powered Miller Bobcat® or Hobart Champion™ Elite welders manufactured after January 2012 and Miller Trailblazer® welders manufacutred after September 2012.

Miller® Bobcat™ 200 Air Pak™ Running Gear With Never Flat tires is a rugged, multi-terrain undercarriage.

For Bobcat® 250 LP and Trailblazer® 275 LP models 2012 & later - includes bracket and clamp to mount 33 and 43-pound propane tanks horizontally and hose with fittings.

Miller Mid Frame Trailer has a 1,424 pound capacity and is built for Bobcats, Trailblazers and Big Blue products with less than 25 horsepower.

2700 lb (1202 kg) capacity highway trailer that is excellent for mounting and towing Miller large-frame engine driven welders.

Heavy-duty 2570 lb (1166 kg) capacity trailer designed for use in mines, quarries, and other rough terrain. Has narrow 22 ft (6.7 m) turning radius. Includes 3 in lunette eye, universal hitch and safety chains.

Genuine Miller® welding cable tree mounts directly to welder trailer or truck and conveniently stores welding cable leads.

Genuine Miller® 2 in 1 Document / Fire Extinguisher Holder mounts directly to welder trailer and conveniently stores documents and one five pound fire extinguisher.

Genuine Miller® air compressor service kit for your Bobcat™ 200 Air Pak™ welder/generator.

Genuine Miller® field installed air compressor oil heater for your Bobcat™ 200 Air Pak™ welder/generator.

Mandatory when operating on California grasslands, brush, or forest-covered land and all National Forests. For other areas, check your state and local laws.