Miller® Big Blue® 500 Pro Deluxe with ArcReach® 907736001
The Miller® Big Blue® 500 Pro with ArcReach® is a 500 amp diesel welder that produces nearly zero diesel emissions. The diesel oxidation catalyst (DOC) in the Kubota V2403 engine requires no exhaust after-treatment maintenance and makes the Big Blue 500 Pro the most clean, most green 500 amp diesel welder on the market.
The Big Blue 500 Pro 907736001 comes standard with Miller ArcReach®. The ArcReach feature allows the Big Blue to communicate with a remote Miller® ArcReach® wire feeder or ArcReach® Stick/TIG remote without the use of a remote control cable. The secret to this technology is built-in circuitry in both the Big Blue 500 Pro welder and Miller ArcReach wire feeder/remote control that passes remote control signals through the welding leads, eliminating the need for costly remote control cables. ArcReach remote control distance is limited only by the length of your welding cable leads. ArcReach allows your Stick, TIG, MIG or Flux-Cored welding operation to take place further away from the welding power source and reduces downtime and costs by giving the operator full remote control capabilities at the site of the weld without using expensive remote control cables. The Big Blue 500 Pro MUST be paired with a Miller ArcReach feeder or ArcReach Stick/TIG remote to get the full benefits of this feature.
When paired with the appropriate wire feeder, the Big Blue 500 Pro with ArcReach can perform MIG, Pulsed MIG, RMD® and flux-cored welding operations.
The Big Blue 500 Pro packs up to 500 amps of welding output at 100% duty cycle and provides 27,000 peak watts of 3-phase auxiliary generator power and 15,000 peak watts of 1-phase auxiliary generator power. It is capable of carbon arc gouging using up to 3/8" diameter carbons.Processes
Pulsed MIG (GMAW-P)
DC TIG (GTAW)
Air carbon arc (CAC-A)
3/8-inch (9.5 mm) carbons
Maintenance and repair rigs
Remote control of the power source
without a cord. ArcReach® allows you to change
weld settings from your ArcReach feeder
or remote, saving a trip to the power
supply. ArcReach technology uses the
existing weld cable to communicate
welding control information between the
feeder or remote and the power source.
This technology eliminates the need for
control cords, and their associated
problems and costs.
Vandalism Lockout Kit Lockable hinged steel panels
cover and protect name plate
gauges and ignition switch
Polarity reversing switch
Heavy-Duty Low-Speed Kubota V2403 Industrial Diesel Engine - The cleanest, greenest diesel power available. Kubota T4F models utilize diesel oxidation catalyst (DOC) technology to keep the air clean with NO exhaust after-treatment maintenance.
Electronic engine display simultaneously displays fuel
level, engine hours, coolant temperature,
oil pressure, battery volts and engine rpm.
Also tracks oil change intervals and
displays engine diagnostics for quick and
Digital meters with SunVision™
technology enable welding parameters
to be viewed with greater clarity than
analog meters — at virtually any angle.
Meters can be seen clearly even in
Standard 14-pin receptacle with
Auto-Remote Sense™ for simple
connection of remote controls and
Industrial USB port.
Quickly upload the
latest software and
log files to retrieve
in-depth information such as
diagnostics and machine statistics.
Low OCV Stick (VRD) reduces the
open-circuit voltage to 15 volts when
the welding power source is not in use,
increasing operator safety without
compromising arc starts.
Arc control is beneficial when welding
with stick and solid wires for easier
fine-tuning of tough-to-weld materials
and out-of-position applications.
20,000 watts of pure generator
power. Plug in an extra Miller®
inverter-based power source for a
second welding arc!
HD powder coat with zinc-rich primer
protects sheet metal from rust and
Standard features include adjustable
Hot Start™, output contactor control,
automatic idle, thermal overload
protection and 120-volt block heater.
This item ships Free via standard ground shipping within contiguous U.S.