Miller® Invision™ 352 MPa MIG Welder with Auxiliary Power 907431001
The Miller® Invision ™ 352 MPa with auxiliary power is a 425 amp MIG/Pulsed MIG welding power source. When combined with a push and/or push-pull wire feeder, the 352 MPa is capable of advanced, industrial pulsed MIG welding operations using a variety of welding wires.
The Invision 352 MPa features synergic pulsed MIG for true "one knob" control. It comes standard with Miller's AutoLine™ technology, which allows the welder to work with 208-575 volt input power, single or three phase, without manual linking. Despite the advanced features, set up is quick and easy.
Standard auxiliary power receptacle on the back of the welder provides up to 10 amps of 115 volt power for water circulators, tools, etc.Processes
Pulsed MIG (GMAW-P)
Flux Cored (FCAW)
Air Carbon Arc (CAC-A) Cutting and Gouging (1/4 in. carbons max)
Heavy Industrial Applications
Light Gauge and Tube
Lawn and Garden Equipment
115 V auxiliary power provides 10 amps
of circuit-breaker-protected power for water
Push-Pull Aluminum Capability -
Easy to set up. Select wire diameter, wire type and gas being used, set your wire speed and strike an arc.
Synergic Pulsed MIG provides communication between the power source, feeder and gun. As wire speed increases/decreases, the pulse parameters also increase/decrease to match the right amount of power needed.
Alumination technology allows use of extended reach push-pull gun for
consistent, versatile and dependable aluminum wire feeding.
SharpArc technology fine tunes puddle fluidity in Pulsed MIG (GMAW-P) welding.
Profile Pulse Achieve stacked dime weld bead appearance without back-stepping.
Synergic one-knob control makes
adjustments easy. Set the wire feed speed
control and the system handles the rest.
Exceptional electrical efficiency. At 400A, efficiency is 87.24%!
350 A of welding output at 60% duty cycle with superior low-end performance.
Power factor of .95 enables smaller fuses/ breakers and primary wiring. Primary
amperage draw at rated output is 25% less
than the competition.
Ultra-tough, polycarbonate-blended cover for control panel protects front controls from damage.
Dual feeder capable so you can always have two wires ready as particular jobs change, saving time and money with less set-up.
Auto-Line Power Management Technology allows for any input voltage hook-up (208 575 V) with no manual linking required, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Fan-On-Demand cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Line Voltage Compensation keeps welding output constant even if input power varies by +/- 10%. 350 MPa models further expand line voltage compensation on 460 VAC to an amazing +37%,-59%.
Comes complete with
FREE Optrel® Panoramaxx CLT Silver auto-darkening welding helmet
Get a FREE Optrel® Panormaxx CLT Silver auto-darkening welding helmet with purchase of a Miller® Invision™ 352 MPA. Expires 12/31/22. (No substitutions allowed.)
The Optrel® Panoramaxx CLT Silver auto-darkening welding hood features Crystal shade 2.0 light state that is unmatched in the world for color and clarity and provides up to 6X the viewing area of a standard 2" X 4" auto-dark welding lens. The key to this revolutionary technology is the size and shape of the ADF, coupled with the unique Panoramaxx shell design, which allows the welding lens to be positioned closer to your face. The Panoramaxx also has advanced features like SHADETRONIC®, which automatically adjusts the shade level based on the brightness of the arc and True Color, which allows for realistic color perception in light or dark states.
All Panoramaxx welding helmets now come with the revolutionary IsoFit® headgear. It is the only welding headgear in the world that wraps the entire crown of the head with multiple touch points to provide a custom fit like never before. Independent "three dimensional" size, width and height adjustments ensure all day comfort with a secure hold.
The Panoramaxx CLT has a built-in rechargeable battery that does not need replacing. The battery is charged through arc light or when manual charging is necessary, a micro USB charging port. It comes complete with micro USB cable, helmet bag and Oprel's 2+1 warranty.
PANORAMIC FIELD OF VISION - The
Panoramaxx CLT offers a 6 times larger field
of vision than standard welding helmets – and
is still a lightweight at only 21.5 ounces.
CRYSTAL LENS TECHNOLOGY 2.0 - Shade 2.0 light state provides the brightest view of your working environment available anywhere. The natural color and clear optics supplied by CLT increases both safety and efficiency in the workplace.
SHADETRONIC® - Detection of the arc brightness and fully automated shade level adjustment from 4 to 12. Adjusts automatically to the changing light
conditions of the current welding method. A sophisticated SHADETRONIC® sensor
continuously measures the light intensity of
the welding arc and regulates the glare protection
progressively and fully automatically.
FADETRONIC - Patented Optrel FadeTronic technology gradually lightens the auto darkening filter after the welding arc is extinguished. The unpleasant afterglow is faded out – especially for high amperage applications. Eye fatigue is
significantly reduced, enhancing worker safety. FADETRONIC can be adjusted for a custom user experience.
TRUE COLOR - A specially developed UV/IR filter allows the realistic color perception typical of
Optrel®, bringing color to the welder’s
world. TRUE COLOR passes more colors of the spectrum through compared to standard "green" spectrum welding lenses.
Optrel Re-Charge - With its rechargeable
batteries is no longer
necessary. Thanks to the latest solar technology,
a rechargeable lithium-polymer battery is
recharged either by the welding light or by the
ambient light. In addition, the battery can also
be charged directly with any USB charger via
a micro-USB interface.
5-Point Detection - intelligent sensor
control with five sensors. Sophisticated software
and clever positioning of four sensors at
the corners and one sensor in the upper center
ensures the lens is switched on and
off perfectly, even in the most difficult lighting
conditions or in awkward positions.
IsoFit® headgear sets a new standard of wearing comfort. It is the only product worldwide
that can be adjusted in width, length and height – i.e. three-dimensionally – to any head shape, so that the
helmet really fits "like a glove."
FadeTronic® - gradually lightens lens when switching from dark (welding) to light state to ease eye fatigue.
Sensitivity Adjustment - allows operator to change lens switching sensitivity for varying ambient light conditions or outdoor welding in sunlight.
Grinding Mode - external grind control allows user to switch between welding mode and shade 2 grinding mode quickly and easily.
Out-Of Position Welding is possible with Optrel®'s unique shell design, which has no seams or edges where weld spatter can collect.
Comes complete with
Micro USB charging cable
1 extra outside cover plate
This item ships Free via standard ground shipping within contiguous U.S.