Home  //  Specials!  //  Miller Trailblazer 325 EFI w/Excel Power & GFCI 907512003

Miller Trailblazer 325 EFI w/Excel Power & GFCI 907512003

Code: 907512003
Miller Trailblazer 325 EFI w/Excel Power & GFCI 907512003+ CLICK IMAGE TO ENLARGE
Cyberweld Price: $6,400.00
Mfg Industrial Price: $8,035.00
You Save:  $1,635.00
Model:  FREE Fall Promo: 
Availability: Usually ships the next business day
QTY:
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Miller® Trailblazer® 325 Welder EFI with Excel™ Power & GFCI 907512003

The Miller® Trailblazer® 325 EFI with Excel™ Power & GFCI is the most fuel efficient gas engine welder/generator on the market. It is a 325 amp, 100% duty cycle DC welder and 12,000 watt AC generator. The Trailblazer 325 EFI features a Kohler 23 horse power, fuel injected engine with Miller's exclusive Auto-Speed™ technology. Auto-Speed® matches the engine speed with the welding load. This means that the engine can run at optimum RPM rather than full RPM while under load. This translates into reduced fuel consumption, quieter operation and longer engine life.

Excel™ Power provides 2,400 watts of generator power while the engine is at idle speed, resulting in dramatically reduced fuel costs. Excel Power reduces emissions, operating noise and extends run time hours. Two 120 volt duplex plugs with GFCI (Ground Fault Circuit Interruption) come as standard equipment. The Trailblazer® 325 EFI has the most smooth, stable welding arc in the business. It produces X-Ray quality welds whether you are using MIG, Stick or DC TIG welding processes.



Processes (X-Ray Quality)
  • Stick (SMAW)
  • MIG (GMAW)
  • Flux Cored (FCAW)
  • DC TIG (GTAW)
  • Air Carbon Arc (CAC-A) Cutting and Gouging (3/16 in carbons)
  • Air Plasma Cutting and Gouging with optional Spectrum models
  • AC Generator

    Applications
    Industrial Applications
    Fabrication
    Maintenance
    Repair
    Structural Steel Work
    Pipe
    Sheet Metal

    Features
  • Excel™ Power - Excel power provides 120V, 60Hz of pure sine wave generator power at idle speed and while welding. When connected to the Excel power receptacle, you get up to 2400 watts of the cleanest generator power available. Plus, you can run most jobsite tools - like grinders, chop saws, drills and lights at idle speed, which provides:
    Exceptional fuel-efficiency
    Extended runtimes
    Quieter operation
    Longer engine life
  • EFI gas engine optimizes the air/fuel ratio for all engine speeds and engine loads, resulting in lower operational costs, fewer emissions, longer runtimes and better performance when compared to carbureted models. The payback from fuel savings alone is a matter of months. EFI will give you:
    Easy starts with no choke required
    Reliable operation, even with infrequent use - less prone to fuel deterioration
    Fuel efficiency - use up to 27 percent less fuel
    Fewer emissions - 27 percent less CO and 33 percent lower HC+NOx levels
  • Auto-Speed™ technology - Automatically adjusts the engine speed to run at lower speeds depending on the total power needed, resulting in:
    Exceptional fuel-efficiency
    Extended runtimes
    Quieter operation
    Reduced emissions
  • Designed for the professional welder - the Trailblazer® 275 delivers unbeatable arc performance in all weld processes, providing the smoothest, most stable arc in the industry.
  • Smart-Cor™ technology - Independent weld and generator power in an improved, more compact design.
    No interaction between jobsite tools and the welding arc, resulting in:
    Stronger, cleaner, more efficient generator power
    Reduced size and weight
    Improved arc performance
  • Innovative design - Engine is rotated to the front to create more efficient airflow, resulting in:
    Quieter operation
    Reduced size and weight
    Easier maintenance
  • Two 120 volt GFCI duplex receptacles come standard





    Get a FREE Miller® T94i™ auto-darkening welding helmet ($529 MSRP Value) with purchase of a Miller® Trailblazer® 325 welder. Helmet ships with order. Expires 12/31/17. (No substitutions allowed.)

    T94i Features
  • ClearLight™ lens technology optimizes contrast and clarity in welding and light states - reducing eye strain and operator fatigue
  • Integrated grinding shield has 44 square inches of viewing area, the best in the industry.
  • Aluminum heat shield protects the digital lens in high amperage applications
  • Weight: 25.7 oz. (729 g) - Lightweight, well-balanced design reduces neck torque, minimizing operator fatigue and strain.



  • Matte silver shell reflects heat to keep helmet and user cool
  • Shade 5.0 side windows enhance peripheral vision, amplifying sense of surroundings.
  • Chiseled shell design provides optimal skin coverage while easily accommodating a Miller® half mask respirator.
  • Convenient quick release provides easy access for front cover lens changes
  • Helmet locks in upright position, allowing user to keep helmet on for non-welding tasks.
  • Digital Controls With Four Operating Modes -
    • Weld Mode™ Shades #8 - 13
    • Cut Mode™ Shades #5 - 8
    • Grind Mode - Light State #3
    • X-Mode™ Shades #8 - 13
  • X-Mode Electromagnetic Arc Sensing for: Sunlight interference outdoors, Low-Amperage TIG, Pipe/Curves, Obstructed Sensors & Hidden/Cavity Welds
  • Infotrac™ 2.0 allows for monitoring of arc time and arc count
  • Half-Shade settings allow for precise lens adjustments based on the environment
  • Simplistic digital lens interface allows for easy adjustment with or without gloves.
  • Integrated mag lens holder
  • Lithium batteries with solar assist; up to 3,000 hours of life
  • Meets ANSI Z87.1-2015 standard
  • Improved headgear features additional settings for better fit & comfort



    Comes complete with
  • 5 outside cover lenses
  • 2 inside cover lenses
  • 2 side window covers
  • Helmet bag



    This item ships Free via standard ground shipping within contiguous U.S.

  • Download Miller Trailblazer 325 Spec Sheet (Requires Adobe Acrobat)
    Download Miller Trailblazer 325 Spec Sheet (Requires Adobe Acrobat)

    Miller Gas Engine Drive Protective Cover 300919 Miller Gas Engine Drive Protective Cover 300919 Miller protective cover for your gas powered Bobcat® welder manufactured after January 2012 or Trailblazer® welder manufactured after September 2012


    Availability: Usually ships the next business day

    Code: 300919

    Mfg Industrial Price: $149.00Cyberweld Price: $126.65

    Style: 


    Miller Welding Cable Set - 2/0, 50 ft. 173851Miller Welding Cable Set - 2/0, 50 ft. 173851Miller Welding Cable Set - 2/0, 50 ft. lead with electrode holder and 50 ft. ground with clamp.


    Availability: Usually ships the next business day

    Code: 173851

    Mfg Industrial Price: $513.74Cyberweld Price: $436.99



    Miller Power Adapter - Full KVA 230 Volt 300517Miller Power Adapter - Full KVA 230 Volt 300517Perfect to adapt your 230 volt welder or plasma cutter to the 230 volt "Full KVA" receptacle on your engine driven welder.


    Availability: Usually ships the next business day

    Code: 300517

    Mfg Industrial Price: $80.00Cyberweld Price: $72.00



    Miller Multi-Terrain Running Gear 300913Miller Multi-Terrain Running Gear 300913Recommended for all surfaces and applications for gas powered Miller Bobcat® or Hobart Champion™ Elite welder manufactured after January 2012, Miller Bobcat® 250 Diesel manufactured after June 2013 and Miller Trailblazer® September 2012


    Availability: Usually ships the next business day

    Code: 300913

    Mfg Industrial Price: $539.00Cyberweld Price: $445.40

    Tires: 


    Miller Off-Road Running Gear 300909Miller Off-Road Running Gear 300909Recommended for rugged jobsites for gas powered Miller Bobcat or Hobart Champion™ Elite welders manufactured after January 2012, Bobcat® 250 Diesel manufactured after June 2013 and Miller Trailblazer® welders manufactured after September 2012.


    Availability: Usually ships the next business day

    Code: 300909

    Mfg Industrial Price: $539.00Cyberweld Price: $458.15

    Tires: 


    Miller Off-Road Running Gear w/Protective Cage & Never Flat 300912Miller Off-Road Running Gear w/Protective Cage & Never Flat 300912Recommended for rugged jobsites for gas powered Miller Bobcat® or Hobart Champion™ Elite welders manufactured after January 2012 and Miller Trailblazer® welders manufacutred after September 2012.


    Availability: Usually ships the next business day

    Code: 300912

    Mfg Industrial Price: $965.00Cyberweld Price: $798.00




    1 Question & 1 Answer
    Adan R
    from California asked:
    June 8, 2017
    Does this machine have a 220 volts plug?
    1 Answers
    Miller Trailblazer 325 EFI w/Excel Power & GFCI 907512003 comes with a 230v receptacle.
    Customer Service
    on June 9, 2017


    back
    close menu
    Miller Trailblazer 325 EFI w/Excel Power & GFCI 907512003 detail
    Miller Trailblazer 325 EFI w/Excel Power & GFCI 907512003