Home  //  Miller Welders  //  Miller Multiprocess Welders  //  Miller XMT 450 CC/CV ArcReach with Aux. Power 907481004

Miller XMT 450 CC/CV ArcReach with Aux. Power 907481004

Code: 907481004
Miller XMT 450 CC/CV ArcReach with Aux. Power 907481004
Cyberweld Price: $5,192.00
Mfg Industrial Price: $6,450.08
(You Save:  $1,258.08)
QTY:
FAST & FREE SHIPPING
Availability: Usually ships the next business day



Miller ® XMT® 450 CC/CV Multiprocess Welder With ArcReach™ 907481003

The Miller® XMT® 450 CC/CV ArcReach™ with Auxiliary Power is a portable 450 amp multi-process welder that communicates with the remote Miller® ArcReach™ wire feeder without the use of a remote control cable. The secret to this technology is built-in circuitry in both the XMT 450 CC/CV ArcReach welder and ArcReach wire feeder that passes remote control signals through the welding leads, eliminating the need for costly remote control cables. ArcReach remote control distance is limited only by the length of your welding cable leads. ArcReach allows your MIG or Flux-Cored welding operation to take place further away from the welding power source and reduces downtime and costs by giving the operator full remote voltage and amperage control capabilities at the site of the weld without using expensive remote control cables. The XMT 350 CC/CV ArcReach MUST be paired with a Miller ArcReach feeder to get the full benefits of this feature

The XMT® 450 CC/CV is a 450 amp multiprocess welder capable of MIG, Stick and DC TIG welding. With a maximum of output of 600 amps, the XMT® 450 CC/CV is heavy duty industrial, inverter welder that is excellent for carbon arc gouging and Flux-Cored Arc Welding.

Comes complete with installed 115 volt, 10 amp receptacle mounted on rear of the welder for operating water circulators and accessories.



  • MIG Welding (GMAW)
  • DC TIG Welding (GTAW)
  • Stick Welding (SMAW)
  • Flux Cored Arc Welding (FCAW)
  • Air Carbon Arc (CAC-A) Cutting and Gouging

    Applications
    Construction
    Shipbuilding
    Railroad
    Truck and Trailer Manufacturing
    Fabrication
    Repair Shops
    Rental Fleets
    Power Generation Plants

    Features
  • Remote control of the power source without a cord - ArcReach™ technology uses the existing weld cable to communicate welding control information between the feeder and power source. This technology eliminates the need for control cords, and their associated problems and costs.
  • Installed 115 volt receptacle provides 10 amps of power for operating water coolers and accessories.
  • Wind Tunnel Technology™ - Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
  • Fan-On-Demand™ - operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
  • Lift-Arc™ - start provides TIG arc starting without the use of high frequency.
  • Adaptive Hot Start™ for Stick - Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
  • Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
  • Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
  • LVC™ Line Voltage Compensation keeps welding output constant even if input power varies by +/-10%. Line voltage compensation further expands to +37% and -59% when operating on 460 VAC.
  • Process selector switch reduces the number of control setup combinations without reducing any features.
  • Large, dual digital meters are easy to view and presettable to ease setting weld output.
  • Compatible with the Wireless Remote Hand Control. Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
  • Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle (CC/CV models only).
  • Low OCV Stick - A built-in, selectable feature, that reduces the Stick mode open-circuit voltage (OCV) to nearly 15 volts when the welding power source is not in use. Eliminates the need for add-on voltage reducers.
  • Ultra-tough, polycarbonate-blended cover for control panel protects front controls from damage.
  • Insight Core Optional Welding Intelligence™ system compatible - XMT CC/CV models are Insight capable to monitor weld voltage, amperage, and arc-time and percentage while MIG or Flux-cored arc welding.
  • Optional gas solenoid for TIG welding.







    This item ships Free via standard ground shipping within contiguous U.S.

  • Download XMT 450 Specs (Requires Adobe Acrobat Reader)
    Download XMT 450 Specs (Requires Adobe Acrobat Reader)



    Miller XMT Cylinder Cart 042537
    Code: 042537
    Has adjustable handles and is slanted for convenient access to power source front panel controls. Carries two 160 lb (72.6 kg) gas cylinders, or one gas cylinder and a Coolmate™ V3 for TIG (GTAW) welding. Feeder mounted to tray above power source.
    Mfg Industrial Price: $1,216.75Cyberweld Price: $996.00


    Availability: Usually ships the next business day
    Miller Inverter MIGRunner Cart 195445
    Code: 195445
    Miller Inverter MIGRunner™ Cart 195445
    For AlumaFeed™ System, Invision™ 352 MPa, and XMT® 304 and 350.
    Mfg Industrial Price: $1,036.15Cyberweld Price: $848.00

    2 Reviews

    Availability: Usually ships the next business day
    Miller ArcReach SuitCase 12 Wire Feeder w/Q300 Gun 951729
    Code: 951729
    The Miller® SuitCase® ArcReach® 12 Wire Feeder with BTB 300 gun is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable.
    Mfg Industrial Price: $3,030.04Cyberweld Price: $2,346.00


    Availability: Usually ships the next business day


    MIG Gun: 
    Miller ArcReach SuitCase 12 Wire Feeder w/S-Gun 951730
    Code: 951730
    Miller® SuitCase® ArcReach® 12 Wire Feeder with Bernard® S-Gun™ is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable.
    Mfg Industrial Price: $3,027.96Cyberweld Price: $2,345.00


    Availability: Usually ships the next business day


    MIG Gun: 
    Miller ArcReach Stick/TIG Remote 301325
    Code: 301325
    Miller® ArcReach™ Stick/TIG remote pairs with your Miller ArcReach™ compatible welder to provide full remote amperage control for your stick or TIG welding application without the use of a remote control cable.
    Mfg Industrial Price: $979.05Cyberweld Price: $868.90

    1 Review

    Availability: Usually ships the next business day
    Miller XMT 450 Gas Valve Kit 300928
    Code: 300928
    Genuine Miller® XMT® 450 Gas Valve Kit for your Miller XMT 450 CC/CV or XMT 450 MPa multi-process welder.
    $129.00


    Availability: Usually ships the next business day
    Miller Welding Intelligence Insight Core 14-Pin Module 301072
    Code: 301072
    Miller™ Welding Intelligence™ Insight Core™ 14-Pin Module collects MIG or FCAW weld data to decrease costs and improve welding performance.
    Mfg Industrial Price: $1,300.00Cyberweld Price: $1,210.00


    Availability: Usually ships the next business day

    There are no questions or answers for this item.



    back
    close menu
    Miller XMT 450 CC/CV ArcReach with Aux. Power 907481004 detail
    Miller XMT 450 CC/CV ArcReach with Aux. Power 907481004
    WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm www.P65Warnings.ca.gov