50 Questions &
55 Answers
rob
from NY asked:
February 11, 2019
does this machine come with a regulator?
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518 comes with a Smith® Argon and AR/CO2 mix regulator/flow gauge
Submitted by:
Cyberweld
on February 13, 2019
Most Helpful Answer
Bruce H.
from San Antonio asked:
September 3, 2017
Can I power this unit with my Miller Trailblazer 325?
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518
will run off of your Trailblazer 325
Submitted by:
Customer Service
on September 26, 2017
Most Helpful Answer
Zach
from NH asked:
March 19, 2017
Does the price include deducting the rebate or is the item eligible for another $200 off through miller?
1 Answer
Our price of $1,880 does not include the Miller Rebate. When you order the item, you pay the Cyberweld price. Once you file the rebate with Miller, they will mail you a check for your rebate.
Submitted by:
Customer Service
on March 20, 2017
Most Helpful Answer
Jian
from Atlanta Georgia asked:
March 4, 2017
Can this machine hold the 10lb flux core wire?
1 Answer
Yes, the Multimatic 200 can hold up to an 11 lb. spool of wire.
Submitted by:
Customer Service
on March 10, 2017
Most Helpful Answer
Armando
from DallAs asked:
February 2, 2017
Is the rebate already in the $1880 or what is the total i would have to pay?
1 Answer
The rebate is not built into our price. You would pay the $1,880.00 we have listed on the website. Then, once you receive your machine, you will file your rebate on Millers website and they will mail you your rebate.
Submitted by:
Customer Service
on February 3, 2017
Most Helpful Answer
Tony
from Mesa, Arizona asked:
November 28, 2016
What are the main differences between the 200 and the 215?
1 Answer
The main differences between the Multimatic 200 and Multimatic 215 are as follows:
The Multimatic 200 is designed to be "portable" with a heavy duty case and shoulder strap. This machine will also provide better TIG control and lower amperage capability for thinner TIG welding. It also comes with a Bernard Q-150 MIG gun and original Miller foot contol.
The Multimatic 215 is more of your standard shop welder, not built to be safely traveled with like the Multimatic 200. Although, it is portable at only 38 lbs. You will also have better MIG control. The Multimatic 215 comes with an M-100 MIG gun and the newer Miller foot control which is a bit smaller than the original.
Neither the Multimatic 200 or Multimatic 215 have the ability to TIG weld aluminum but both can MIG aluminum with the use of a Spoolgun.
Submitted by:
Customer Service
on December 12, 2016
Most Helpful Answer
Agustin r
from California, Hayward asked:
September 12, 2016
Does it come with the complete Kit including for stick,mig.tig,aluminum. And gauges?
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518 comes ready to sitck weld and mig weld. The tig accessory kit is an option in the drop down box, as well is the spool gun to mig aluminum. This machine will not tig weld aluminum.
Submitted by:
Customer Service
on September 12, 2016
Most Helpful Answer
Rob
from New York asked:
August 16, 2016
How many amps does this machine pull when plugged into a 115 VAC?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 will draw 27amps when run on 120 volt AC at the rated output of 150amps 30% duty cycle
Submitted by:
Customer Service
on August 16, 2016
Most Helpful Answer
Mike Ivey.
from Augusta, Ga asked:
August 11, 2016
Can I get a 15' gun instead of the 10, gun. ..?
1 Answer
You cannot substitute a 15 ft mig gun for the 10 ft Q-150 mig gun that comes with the Miller Multimatic 200 Auto-Set Elite Welder 907518 . You can, however, purchase a 15 ft Miller M-150 mig gun #249041 ($163.99) or a 15 ft Miller M-25 mig gun #169598 ($269.05) to install on the Multimatic 200. You would then have 2 guns a 10ft and a 15ft.
Submitted by:
Customer Service
on August 12, 2016
Most Helpful Answer
Joe
from Joliet il asked:
June 27, 2016
What's the difference for a hobbiest welder between the multimatic 200 and a synco wave 210 with mig,tig and stick?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 is basically a mig welder that can also be used for stick welding and DC tig welding.The Miller Syncrowave 210 TIG/MIG is really a tig/ stick welder that Miller has adapted a spoolgun to it allow it to do light mig welding. If you plan on doing alot of Mig welding then the Multimatic would be the way to go. If your are planning on doing alot of tig weld,especially aluminum, the the Sycrowave would be a better choice.
Submitted by:
Customer Service
on June 28, 2016
Most Helpful Answer
Brett
from Seattle asked:
June 7, 2016
What carts would work with the Miller Multimatic 200?
1 Answer
Miller recommends the Miller Running Gear/Cylinder Rack 301239 for use with the Miller Multimatic 200 Auto-Set Elite Welder 907518 .
Submitted by:
Customer Service
on June 8, 2016
Most Helpful Answer
Mark Charles
from PA - Pennsylvania asked:
May 11, 2016
Can I use this with a gas driven generator
1 Answer
You can run a Miller Multimatic 200 Auto-Set Elite Welder 907518 off of a generator . You will need a 5kw generator.
Submitted by:
Customer Service
on May 12, 2016
Most Helpful Answer
jeff
from allentown pa asked:
April 7, 2016
Do i need to change liner in Bernard mig gun to run different diameter wire with millermatic 200
2 Answers
The Miller Multimatic 200 Auto-Set Elite Welder 907518 comes set to run .030 and .035 wire. If you are going to run .023/.024 wire you probably will not need to change the liner unless you are going to run these smaller sizes exclusively. If you plan on running .045 flux cored wire then you will definitely need to change the liner .
Submitted by:
Customer Service
on April 7, 2016
Most Helpful Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 comes set to run .030 and .035 wire. If you are going to run .023/.024 wire you probably will not need to change the liner unless you are going to run these smaller sizes exclusively. If you plan on running .045 flux cored wire then you will definitely need to change the liner .
Submitted by:
Customer Service
on April 7, 2016
Most Helpful Answer
DaVita Jamison
from Columbia, SC asked:
January 1, 2016
You all are still advertising the rebate. I had this in my cart and it didn't process correctly. Is there any way I can still purchase with the $500 rebate?! Please help!
1 Answer
The Miller rebate program for the Miller Multimatic 200 Auto-Set Elite Welder 907518 ended on December 31 2015. Any orders received and dated prior to January 1, 2016 will be eligible for the rebate. Any orders received after December 31 2015 will not be eligible
Submitted by:
Customer Service
on January 5, 2016
Most Helpful Answer
Eddie
from temecula asked:
January 1, 2016
Rebate says requests must be postmarked by Jan 16th, does this mean it's possible to get the rebate still?
1 Answer
The Miller rebate program for the Miller Multimatic 200 Auto-Set Elite Welder 907518 ended on December 31 2015. Any orders received and dated prior to January 1, 2016 will be eligible for the rebate. Any orders received after December 31 2015 will not be eligible. The January 15th 2016 date is the cut off date for Miller to receive completed rebate forms.. If you purchased an eligible Miller machine you have until January 15 2016 to submit your completed rebate form to Miller in order to receive your rebate.
Submitted by:
Customer Service
on January 5, 2016
Most Helpful Answer
Mike Brown
from nashville,tennessee asked:
December 21, 2015
Just got one of these for work today. Need to know what size / product number for the wire that will
fit inside. Will be welding mostly stainless , along with steel every now and then.
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 will accept up to a 8 inch diameter spool. This size spool will generally hold 10 or 11 lbs of wire
Submitted by:
Customer Service
on December 22, 2015
Most Helpful Answer
Alonso
from Texas asked:
November 6, 2015
I see offer a helmet Miller with purchase aditional a rebate this is rigth?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 is eligible for the Miller Build with Blue rebate. The free helmet offer ended on October 31
Submitted by:
Customer Service
on November 9, 2015
Most Helpful Answer
Jason Hughes
from French Lick, Indiana asked:
October 25, 2015
Will the Tig kit in the drop down menu (951649) for this welder count toward the $500 Miller Accessories rebate? Thanks.
1 Answer
If you purchase the Miller Multimatic 200 Auto-Set Elite Welder 907518 and choose the tig kit option in the drop down menu it will count towards the $500.00 rebate.Keep in mind all accessories purchased must appear on the same invoice as the machine in order to quality for the $500.00 rebate.
Submitted by:
Customer Service
on October 26, 2015
Most Helpful Answer
chris
from bakersfield, CA asked:
October 23, 2015
Can I put a 15ft Q-150 mig gun on this machine and it work reliably or is it too much for the drive to handle?
1 Answer
You can install a 15 ft Bernard Q 150 mig gun on a Miller Multimatic 200 Auto-Set Elite Welder 907518 if it has a serial #ME031070N and later and has a 3 groove drive roll . Miller does not recommend installing a 15 ft gun on machines with a serial # prior to ME031070N with a 2 groove drive roll
Submitted by:
Customer Service
on October 26, 2015
Most Helpful Answer
henry
from orlando,fl asked:
October 12, 2015
hi so is this miller 200 ELITE 907518 the same as the miller 200 951649 the same welder?? with out the tig kit and spool gun? and if i purchase the ELITE 907518 and add on the tig kit and aluminum spool gun, would i be able to get the $500 rebate?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 and the Miller Multimatic 200 With WP17 TIG Kit 951649 include the same Multimatic 200 Auto Set Elite Welder. They difference is the package . The 907518 is a Stick /Mig package and the 951649 is a Stick/Mig/Tig package.If you purchase the 907518 and the Miller Spoolmate 100 MIG Spoolgun 300371 and the Miller Multimatic 200 TIG Kit 301287 you will qualify for the $500.00 rebate
Submitted by:
Customer Service
on October 13, 2015
Most Helpful Answer
Mark
from Phoenix Az asked:
October 2, 2015
What 220 volt breakers should I install in my garage to power this unit? Same for 110 volt.
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 will draw 27 amps at rated output on 120 volt and 21 amps at rated output on 230 volt.
Submitted by:
Customer Service
on October 2, 2015
Most Helpful Answer
Vitaly
from New York City asked:
September 23, 2015
I want to buy this welding machine miller multimatic 200 and this order OPTIONAL 301287 TIG Kit and order OPTIONAL Spoolmate , will I receive a 500$ rebate
How many days and the price shipping in the New York City ?
1 Answer
If you purchase the Miller Multimatic 200 Auto-Set Elite Welder 907518 plus the Miller Multimatic 200 TIG Kit 301287 for $418.50 and the Miller Spoolmate 100 MIG Spoolgun 300371 for $246.00 you will qualify for the $500.00 rebate.. Shipping is free and shipping time to New York is 1 day in most cases
Submitted by:
Customer Service
on September 23, 2015
Most Helpful Answer
Iram
from Atlanta ga asked:
September 6, 2015
Can i still weld up to 3/8" With the multimatic 200 using the 120v output
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518 max in a single pass on 110v would be 3/16 mild steel.
Submitted by:
Customer Service
on September 8, 2015
Most Helpful Answer
Iram
from Atlanta ga asked:
September 6, 2015
If you run this machine in 120 regular house what's the max you can weld on steel ?
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518 max in a single pass on 110v would be 3/16 mild steel.
Submitted by:
Customer Service
on September 8, 2015
Most Helpful Answer
Mike
from Atlanta asked:
August 13, 2015
Does this price include the $500 mail in rebate?
1 Answer
The rebate program for the Miller Multimatic 200 Auto-Set Elite Welder 907518 is a mail in rebate.You would pay the $1785.00 price shown on our site. When you receive your machine you will also receive a rebate form.. Complete the rebate form. send it to Miller with a copy of your receipt and Miller will send you a check for the rebate amount in 4 to 6 weeks
Submitted by:
Customer Service
on August 14, 2015
Most Helpful Answer
Omer
from DENVER, CO asked:
May 13, 2015
what is the warranty? Does it have to be returned to you or can I warranty through a local supplier?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 has a 3 year warranty parts and labor on the machine itself.. The Mig gun and accessories are warrantied for 6 months. You do not have to return the machine to us for warranty service . Service can be handled thru any Miller authorized service facility.
Submitted by:
Customer Service
on May 13, 2015
Most Helpful Answer
Jorma
from San Jose CA asked:
April 25, 2015
I bought this welder a few years ago without the tig kit. It has been a really great machine. I recently decided to start tig welding with it, and I have everything I need except I have one question... The smith regulator that came with the unit, is this ok to use with Argon gas for tig welding? The reason I ask is that when i look in the manual for the machine, it shows a drawing of the tig gas connection to the machine being done with a regulator that has a flow meter on it. Mine does not have a flow meter it seems.
Also I would like to know, if it IS ok to use the regulator that I already have, are there any advantages to using a regulator with a flow meter?
My primary use for this will be tig welding low pressure heat system piping (not sanitary grade)
1 Answer
The regulator that came with your Miller Multimatic 200 Auto-Set Elite Welder 907518 will work for tig welding.A regulator with a flow tube may be a little more accurate however it is not as durable
Submitted by:
Customer Service
on April 29, 2015
Most Helpful Answer
John Zappela
from Phoenix, AZ asked:
April 7, 2015
If you purchase the TIG Kit and MIG gun, does that purchase qualify for the $500 Rebate?
1 Answer
If you purchase the Miller Spoolmate 100 MIG Spoolgun 300371 for $246.00 plus the Miller Multimatic 200 TIG Kit 301287 for $418.50 you will qualify for the Miller Multimatic 200 Auto-Set Elite Welder 907518 $500.00 rebate
Submitted by:
Customer Service
on April 7, 2015
Most Helpful Answer
Dave
from DC asked:
March 20, 2015
I am confused by the reply from Customer Service reference the $250 rebate. I read that the $250 rebate applies when you purchase just the Multimatic 200, with no additional accessories (Rebate machine only). And that the $500 rebate would apply if you made additional purchases equalling more than $500 (Rebate with additional purchases).
1 Answer
If you purchase just the Miller Multimatic 200 Auto-Set Elite Welder 907518 alone you will receive a $250.00 rebate check from Miller once you complete and submit the appropriate rebate form to Miller...
If you purchase a Miller Multimatic 200 and also purchase an additional $500.00 or more in Miller family accessories (Miller, Hobart,Weldcraft, Bernard,Smith products) Miller will send you a check for $500.00 once they receive a completed rebate form.. The accessories purchased must appear on the same order as the Multimatic..
Submitted by:
Customer Service
on March 20, 2015
Most Helpful Answer
Ace Kool
from Loomis, California asked:
January 27, 2015
My only concern with this welder is its durability especially when operated at full power for long periods. I know it has a 3 year warranty but I still recall enough folks at various venues having reliability issues.
1 Answer
We have discussed your concerns about the durability of the Miller Multimatic 200 Auto-Set Elite Welder 907518 with Miller Electric. They indicted that they did have a minor problem with some early production models but that issue has long since been addressed. The Multimatic 200, as with all welding machines, has a Duty Cycle rating..Duty Cycle is the number of minutes out of a 10 minute time period that a welding machine can be operated at maximum rated output. For example the Multimatic 200 has a 20 % duty cycle at it's rated output of 150 amps in the mig mode. This means that the unit can weld continuously for 2 minutes out every 10 minutes at 150 amps before it shuts down to protect itself from over heating. The Multimatic is capable of producing 200 amps max for mig welding. If you were to operate Multimatic at max output the duty cycle would be approximately 5% so it will shut down sooner to protect itself.As long as the Multimatic is used in the parameters that it was designed for you should have no problems
Submitted by:
Customer Service
on January 28, 2015
Most Helpful Answer
Joe Cagnina
from Weaverville, NC asked:
January 3, 2015
Please forgive the dumb questions...I've never welded anything before.
What is the difference between the Miller 200 #907518 and #951586?
Also, can you hook up an external cylinder (7 inch?) to both of these units?
Thanks,
Joe Cagnina
1 Answer
The only difference between the Miller Multimatic 200 Auto-Set Elite Welder 907518 and the 907586 is the 907586 comes with the "free" tig contractor kit. The Multimatic 200 can be hooked up to any cylinder that has a CGA 580 inert gas connection.
Submitted by:
Customer Service
on January 5, 2015
Most Helpful Answer
Steve
from Honolulu, HI. asked:
December 18, 2014
Do you ship to Hawaii & what is the typical added cost?
1 Answer
We do ship to Hawaii however shipping is not free and we can not ship the larger machines. When placing an order for shipment to Hawaii you must choose the 2 day air option.Without knowing what item you are purchasing and the shipping zip code we cannot provide you with the exact shipping costs. If you were to purchase the Miller Multimatic 200 Auto-Set Elite Welder 907518 shipping costs to Hawaii would be approx $320.00
Submitted by:
Customer Service
on December 19, 2014
Most Helpful Answer
Vinnie
from Inyokern, CA asked:
December 17, 2014
Do you have financing?
2 Answers
You may finance the purchase of the Miller Multimatic 200 Auto-Set Elite Welder 907518 by choosing PayPal's "Bill Me Later" option at check out. You MUST use PayPal in order to take advantage of financing.
Submitted by:
Customer Service
on December 18, 2014
Most Helpful Answer
You may finance the purchase of the Miller Multimatic 200 Auto-Set Elite Welder 907518 by choosing PayPal's "Bill Me Later" option at check out. You MUST use PayPal in order to take advantage of financing.
Submitted by:
Customer Service
on December 18, 2014
Most Helpful Answer
Gerald
from Morristown, AZ asked:
December 10, 2014
Does this machine do High Frequency Start on the TIG side
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 does not have high frequency capability
Submitted by:
Customer Service
on December 10, 2014
Most Helpful Answer
RIck
from Nevada asked:
November 13, 2014
Does the TIG foot control kit qualify for the rebate, and what does the kit include?
4 Answers
The Miller Multimatic 200 TIG Contractor Kit 301130 does qualify as an accessory for the Miller Multimatic 200 Auto-Set Elite Welder 907518 rebate program. This kit includes:
Weldcraft® 150-amp WP-17 TIG torch with 25-mm Dinse connector
AK-2 torch accessory kit
Remote foot control
Smith flow regulator & gas hose
carrying case
Submitted by:
Customer Service
on November 13, 2014
Most Helpful Answer
The Miller Multimatic 200 TIG Contractor Kit 301130 does qualify as an accessory for the Miller Multimatic 200 Auto-Set Elite Welder 907518 rebate program.
Submitted by:
Customer Service
on November 13, 2014
Most Helpful Answer
The Miller Multimatic 200 TIG Contractor Kit 301130 does qualify as an accessory for the Miller Multimatic 200 Auto-Set Elite Welder 907518 rebate program.
Submitted by:
Customer Service
on November 13, 2014
Most Helpful Answer
The Miller Multimatic 200 TIG Contractor Kit 301130 does qualify as an accessory for the Miller Multimatic 200 Auto-Set Elite Welder 907518 rebate program.
Submitted by:
Customer Service
on November 13, 2014
Most Helpful Answer
jerome
from md asked:
October 29, 2014
can you weld aluminum with the mig torch that comes with it or do i need to purchas a spoolgun.
1 Answer
You can weld aluminum with the Miller Multimatic 200 Auto-Set Elite Welder 907518 using the standard gun but is can be difficult and sometimes trying. The problem is the aluminum wire is soft and it does not want to feed thru the 10 ft length of the standard mig gun. It usually winds up bird nesting at the drive rolls or sometimes breaking off inside the gun. To make it work at all you would need to keep the mig gun as straight as possible and use an over sized contact tip.If you plan on welding aluminum on a regular basis it would be best to purchase the spool gun
Submitted by:
Customer Service
on October 30, 2014
Most Helpful Answer
dustin
from wheatfield,indiana asked:
October 21, 2014
how does the $250 rebate work
1 Answer
In order to participate in the Miller rebate you are required to purchase the Miller Multimatic 200 Auto-Set Elite Welder 907518 plus an additional $250.00 worth of Miller family accessory products (including Hobart,Smith,Weldcraft , Bernard). Welding Helmets, Jackets, Gloves Tig Torches, Plasma Consumables ,Mig Guns and Parts, Hobart stick electrodes, and Welding Wire Are all examples of items that will qualify.. If it is a Miller Family item it will qualify. You would then fill out the rebate form and send it to Miller. They will then send you a check. Basically you will be getting the accessories for free
Submitted by:
Customer Service
on October 22, 2014
Most Helpful Answer
mike
from miami, fl asked:
August 27, 2014
will Harris 4043 Aluminum MIG Welding Wire - 1# spool work this machine and the spool gun it comes with if you purchase the optional Miller Spoolmate 100 MIG Spoolgun 300371
1 Answer
Harris 4043 Aluminum MIG Welding Wire - 1# spool will work with the
Submitted by:
Customer Service
on August 28, 2014
Most Helpful Answer
Keith
from springfield tn asked:
August 5, 2014
will a 6000watt generator be good enough for this welder
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 will require 4.5 KW welding at 150amps at 26 volts at a 30% duty cycle..This should be it's max requirement
Submitted by:
Customer Service
on August 5, 2014
Most Helpful Answer
Brian Piercy
from California, CA asked:
March 21, 2014
VW restoration guy here. We burn 20 gauge on most of our panels that don't require spot welding. Looks like 24 gauge is the thinnest metal Miller advises this unit be used on. Is there any other information suggesting the 200 Multimatic could be used on 20 gauge with happy results?
1 Answer
Since 24 gauge(.025) is thinner than 20 gauge (.037) the Miller Multimatic 200 Auto-Set Elite Welder 907518 will have no problem welding the 20 gauge
Submitted by:
Customer Service
on March 21, 2014
Most Helpful Answer
matt
from springfield, Ma asked:
December 11, 2013
Is it capable of having a foot pedal connected?
1 Answer
A foot pedal can be installed on the Miller Multimatic 200 Auto-Set Elite Welder 907518 .. The recommended foot pedal for the Multimatic 200 is the Miller RFCS-6M Remote Foot Control 195183
Submitted by:
Customer Service
on December 12, 2013
Most Helpful Answer
Tim
from Glendora, CA asked:
October 13, 2013
I will need a small inert gas cylinder for this purchase and a small cart to hold the cylinder as well.
What do you offer that will work for this unit
1 Answer
There are 2 carts available for use with the Miller Multimatic 200 Auto-Set Elite Welder 907518 .. The Miller / Hobart Small Running Gear/Cylinder Rack 194776 and the Miller / Hobart Running Gear/Cylinder Rack 770187
Submitted by:
Customer Service
on October 14, 2013
Most Helpful Answer
Don
from Seattle asked:
August 14, 2013
Can i use my dryer outlet that i have in the garage(i think is 240v 50amp) for this welder?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 can be run off of your 240 volt 50amp dryer circuit.. The Multimatic 200 comes with a NEMA 6-50p male plug.. Your dryer receptacle may not be a 6-50 style.. You may have to change your dryer receptacle to match the Multimatic
Submitted by:
Customer Service
on August 14, 2013
Most Helpful Answer
Don
from Seattle asked:
August 11, 2013
what size and amp extension cord would I need to run this welder for 220v ?
1 Answer
If your going to run the Miller Multimatic 200 on 220 volt the .Direct Wire Extension Cord - 230 Volt , 25' or 50' 8/3. would be a good choice.. Your can find this on our site.. If you plan on running the Multimatic 200 on 110 volt your should look for a good quality cord that is made with a minimum of #12 wire but #10 wire would be better We do not have any 110 volt extension cords on the site
Submitted by:
Customer Service
on August 12, 2013
Most Helpful Answer
DJ
from seattle asked:
August 10, 2013
Does it come with everything to start mig welding except the gas and cylinder or do i need to get anything else to start mig welding? Does it come with any spool of wire?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 comes ready to stick weld and mig weld right out of the box.. For mig welding you will need a spool of wire and a cylinder of shielding gas
Submitted by:
Customer Service
on August 12, 2013
Most Helpful Answer
Michael
from California asked:
August 6, 2013
Can the Multimatic 200 use 2-lbs (4-inch) wire spools without the spoolgun?
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518 will accept 2# spools of wire using the regular mig gun.
Submitted by:
Customer Service
on August 7, 2013
Most Helpful Answer
Bruce
from Mississippi asked:
July 5, 2013
what mig wire spool do you use with this product?
thks
1 Answer
Miller Multimatic 200 Auto-Set Elite Welder 907518 will run up to an 8 inch spool. Which we have on 11# reels. Here is the link for the mild steel wire:
http://store.cyberweld.com/hobhbmigwir1.html
Submitted by:
Customer Service
on July 8, 2013
Most Helpful Answer
Kyle
from Santa Barbara, ca asked:
May 17, 2013
Does the tig function on this machine allow for high frequency starts or is it lift arc only?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 does not have high frequency capability.. Lift arc only
Submitted by:
Customer Service
on May 20, 2013
Most Helpful Answer
big surge
from los angeles asked:
April 23, 2013
Could you replace the tig torch body with a flex neck?
1 Answer
Yes you can install a flex head torch on the Miller Multimatic 200 Auto-Set Elite Welder 907518 .. You may want to consider installing a torch like the Weldcraft WP17F Flexible Neck TIG Torch Package - 150 Amp Air-Cooled.. To install this torch you would need a Miller TIG Torch Power Adapter 195234 ..You will also need a either a 195184 hand control or a 195183 foot pedal in order to start the arc and control the amperage
Submitted by:
Customer Service
on May 7, 2013
Most Helpful Answer
Jorge
from Belleville new jersey asked:
January 3, 2013
What size generator need to supply this machine?
1 Answer
The Miller Multimatic 200 Auto-Set Elite Welder 907518 will require a minimum of a 4500 watt generator
Submitted by:
Customer Service
on January 11, 2013
Most Helpful Answer
![Bizrate Circle of Excellence - See [Merchant Name] Reviews at Bizrate.com](https://medals.bizrate.com/awards/vertical/large/228064_coe.gif)
SIGN UP