Home  //  TIG Welders  //  Miller Maxstar 800 TIG Welder 907718  //  Miller RFCS-14 HD Foot Control 194744

Miller RFCS-14 HD Foot Control 194744

Code: 194744
Miller RFCS-14 HD Foot Control 194744
Cyberweld Price: $323.95
Mfg Industrial Price: $365.02
(You Save:  $41.07)
5 Reviews
QTY:
FAST & FREE SHIPPING
Availability: Usually ships the next business day
15 Questions & 17 Answers



Miller RFCS-14 HD Foot Control 194744

The Miller RFCS-14 HD heavy-duty foot control is compatible with all Miller solid-state power sources equipped with a 14-pin receptacle AFTER serial #JK674521. New design increases stability with a larger base and a heavy 20 ft cord that can exit the front, back or either side of the pedal. Provides remote current and contactor control. 14-pin plug.

This item ships Free via standard ground shipping within contiguous U.S.



Miller Remote Control 25 ft. Extension Cord 242208025
Miller Remote Control 25 ft. Extension Cord 242208025
Code: 242208025
Genuine Miller® 14-pin, 25 foot extension cord for remote contactor, amperage and voltage controls for all Miller 24 VAC wire feeders and remote controls.
Mfg Industrial Price: $211.12Cyberweld Price: $187.40

3 Reviews

Availability: Usually ships the next business day


Length: 

15 Questions & 17 Answers
Ask a Question
Jacob
from edmonton alberta asked:
March 10, 2020
will this foot pedal work a miller dynasty 200 serial no MA050265L?


1 Answer

Miller RFCS-14 HD Foot Control 194744 will work with your Dynasty 200


Submitted by: Cyberweld on March 11, 2020

Answer
Marky's Welding
from Dalzell, South Carolina asked:
September 26, 2019
I have a Maxstar 91 with snap start set up that uses only pins out of the 14..I am assuming this will work...correct?
1 Answer

Miller RFCS-14 HD Foot Control 194744 will work with the Miller Maxstar 91.
Submitted by: Cyberweld on September 27, 2019

Answer
RObert B
from WA asked:
August 19, 2019
Will this work with the Multimatic 200 
1 Answer
Miller RFCS-14 HD Foot Control 194744 will not work with the MultiMatic 200.  You would need Miller® RFCS-6M Remote Foot Control 195183.
Submitted by: CYBERWELD on August 20, 2019

Answer
Brian
from Waterville,Maine asked:
July 27, 2019
Will this control work with a Dynasty 200dx s/n LK310256L?
1 Answer
Miller RFCS-14 HD Foot Control 194744 will work your Dynasty with sn#LK310256L
Submitted by: Cyberweld on July 31, 2019

Answer
Albert F
from Calexico california asked:
July 11, 2018
Will this work with the multimatic 215? My rj45 pedal shorted after 4 months looking to upgrade.
1 Answer
Miller RFCS-14 HD Foot Control 194744 will work with the Multimatic 215 with the addition of Miller RJ45 To 14-Pin Remote Control Adapter Cord 300688
Submitted by: Cyberweld on July 12, 2018

Answer
pablo
from thermal california asked:
September 21, 2017
does it fit dynasty 210
1 Answer
Miller RFCS-14 HD Foot Control 194744 will work with a Dynasty 210
Submitted by: Customer Service on September 28, 2017

Answer
Shyam
from new york asked:
October 31, 2016
will this work with the miller cst 280
1 Answer
The Miller RFCS-14 HD Foot Control 194744 will work with the Miller CST 280.
Submitted by: Customer Service on November 23, 2016

Answer
James Osbourne
from TEXAS asked:
October 5, 2016
kc 335020 is the serial number of my Syncrowave 250. Wanted to be sure this foot pedal is the correct one before I order one. It says all serial numbers after jk series so this is a kc series and it should work I think. Just want to be 100% sure. james
1 Answer
Your Syncrowave 250 uses a 14 pin remote receptacle. The Miller RFCS-14 HD Foot Control 194744 will work with your machine
Submitted by: Customer Service on October 10, 2016

Answer
Irv Ayers
from Ottawa, Illinois asked:
September 16, 2016
I have a Miller Syncrowave 250 and wanting a foot pedal for it. Will this pedal work for the syncorwave?
1 Answer
If the receptacle for the foot pedal on your your Syncrowave 250 has 14 holes than the Miller RFCS-14 HD Foot Control 194744 will work for you.. If it doesn't then will will need the serial# of your machine to determine which foot pedal you will need
Submitted by: Customer Service on September 19, 2016

Answer
modern carriage werks
from bridgeview il. asked:
October 22, 2015
is there a replacement cord available and do you carry it and part # . how long to delivery
1 Answer
A replacement cable is available for the Miller RFCS-14 HD Foot Control 194744. The Miller part# for this cable is 271020 and the price is $89.32.. We do not stock this item but we can order it for you.You are probably looking at about 7 to 10 days for delivery.
Submitted by: Customer Service on October 22, 2015

Answer
Joe
from North Port, FL asked:
August 18, 2015
What's the difference between the 194744 model and 043554 model , besides the base and cord ? I recently ask if it will work on a Hobart tigmate 500424 which came originally with the controls on the torch.... Thank you for the feedback...
1 Answer
Miller indicates that the only differences between the Miller RFCS-14 HD Foot Control 194744 and the Miller RFCS-14 Foot Control 043554 are the 194744 has a heavier base and the cable is a heavier gauge..Either of these foot pedals will work on your Hobart Tigmate
Submitted by: Customer Service on August 18, 2015

Answer
scott
from new york asked:
January 10, 2015
does foot pedal work with dynasty 280
1 Answer
The Miller RFCS-14 HD Foot Control 194744 will work with the Dynasty 280
Submitted by: Customer Service on January 12, 2015

Answer
Kyle
from Kennesaw, Georgia asked:
September 30, 2014
Is this foot control compatible with a Miller Dynasty 700, Stock No. 907101, Serial No. LK021053L ?
3 Answers
The Miller RFCS-14 HD Foot Control 194744 is the correct foot pedal for the Dynasty 700
Submitted by: Customer Service on September 30, 2014
The Miller RFCS-14 HD Foot Control 194744 is the correct foot pedal for the Dynasty 700
Submitted by: Customer Service on September 30, 2014
The Miller RFCS-14 HD Foot Control 194744 is the correct foot pedal for the Dynasty 700
Submitted by: Customer Service on September 30, 2014

Answer
Barry S
from Jackson, Mi asked:
April 6, 2014
I have a Miller Syncrowave 200 Ser#LG260684L that came with foot controller RFCS-14. I dropped the foot controller and broke it. Can I replace it with this foot controller? My concern is there are only 4 pins being used in the controller that I have to replace out of a total of 14 pin holes in the plug. Thanks Barry
1 Answer
The Miller RFCS-14 HD Foot Control 194744 should be a direct replacement for your footpedal
Submitted by: Customer Service on April 8, 2014

Answer
Jason
from dover DE asked:
March 1, 2014
Will this work with the diversion 180 and what adapter is required?
1 Answer
If you want to use a Miller RFCS-14 HD Foot Control 194744 with a Miller Diversion 180 you will need the Adapter Cord for RJ45 to 14-Pin #300688 ($44.10)
Submitted by: Customer Service on March 3, 2014

Answer

Write a Review
Review Summary
4.8
5 Reviews
5
80% (4)
4
20% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (5 of 5 responses)
By Bob
California
Foot Pedals
March 13, 2020
Good quality, fast shipping, and great service.
By Bernard
Lombard, Illinois
Customer service, shipping, and handling were awesome.
August 19, 2015
Will definitely buy again and recommend friends to you.
Consnone
By Charlie E.
Winston-Salem
Miller Works
April 13, 2013
Excellent cooler .Miller, what else can you say?
ProsLong cord is nice
By Matt
Logan, UT
Foot Pedal
July 8, 2012
Does what it does. Trim off amps to eliminate craters.
By Wilmer
Jamesport MO
Great Quality!
March 12, 2012
Wow! Makes tig welding much more controllable!
ProsExcellent response and great feel when you back off the amperage.