Home  //  Shop All Brands  //  ESAB  //  ESAB Burn And Earn Rewards Program  //  Thermal Dynamics Cutmaster 58 Plasma Cutter w/50 ft Torch 1-5831-1  //  Thermal Dynamics Radius/Roller Guide Kit 7-7501

Thermal Dynamics Radius/Roller Guide Kit 7-7501

Code: 7-7501
Thermal Dynamics Radius/Roller Guide Kit 7-7501
Cyberweld Price: $85.45
Mfg Industrial Price: $91.15
(You Save:  $5.70)
Bushing for Cutmaster 42: 
QTY:
FAST & FREE SHIPPING
Availability: Usually ships the next business day



Thermal Dynamics® Radius/Roller Guide Kit 7-7501

Genuine Thermal Dynamics® plasma torch radius/roller guide kit. Fits all SureLok and 1Torch plasma torches.

This easy-to-use guide maintains a consistent height off the work piece whether you are using the circle cutting attachment for cutting circles or the roller guide feature to improve your straight-line cutting.

Both novices and experts will see noticeable improvement in quality, speed and parts life. Can be used with most Thermal Dynamics® torches

Specs
  • Cut circles from 3 inch (76mm) up to 28.7 inch (730mm)

    NOTE: SL40 Cutting Guide Bushing #7-2915 required for Cutmaster® 42 plasma torch.

    This item ships Free via standard ground shipping within contiguous U.S.



  • Thermal Dynamics SL40 Cutting Guide Bushing 7-2915
    Code: 7-2915
    Genuine Thermal Dynamics® cutting guide bushing for your SL40 plasma torch.
    Mfg Industrial Price: $18.54Cyberweld Price: $17.40


    Availability: Usually ships the next business day

    4 Questions & 5 Answers
    Zach
    from Elkton, MD asked:
    June 19, 2017
    Is the bushing that is offered required for the SL-60 torch? There is only an option for the SL-40 torch.
    1 Answer
    The bushing is required for only the SL40 torch
    Submitted by: Customer Service on June 20, 2017

    Alan
    from WYOMING asked:
    April 26, 2016
    Will this kit fit a Hypertherm PowerMax 45?
    2 Answers
    We do not sell Hypertherm products so we do not know if he the Thermal Dynamics Radius/Roller Guide Kit 7-7501 will work on a PowerMax 45
    Submitted by: Customer Service on April 27, 2016
    We do not sell Hypertherm products so we do not know if he the Thermal Dynamics Radius/Roller Guide Kit 7-7501 will work on a PowerMax 45
    Submitted by: Customer Service on April 27, 2016

    Chris
    from Pearland Texas asked:
    March 31, 2016
    Will this work with the Hobart 12CI Plasma Cutter? Thanks in advance
    1 Answer
    The Thermal Dynamics Radius/Roller Guide Kit 7-7501 is not designed to work with a Hobart AirForce 12ci Plasma Cutter 500564. If you are looking for a similar item that will work with a 12CI you should look at the Miller Plasma Cutting Guide 253055
    Submitted by: Customer Service on April 1, 2016

    lester
    from westport ct 06880 asked:
    August 26, 2013
    will Thermal Dynamics Radius/Roller Guide Kit 7-7501 fit pakmaster 38xl
    1 Answer
    The Thermal Dynamics Radius/Roller Guide Kit 7-7501 can be made to work on your Pakmaster 38Xl.. In addition to the 7-7501 you will also need a 9-6529 bushing ( $16.04) and a 9-6515 sleeve ($11.08).. Both these additional items would be special order items.
    Submitted by: Customer Service on August 27, 2013


    Review Summary
    4.2
    11 Reviews
    5
    64% (7)
    4
    18% (2)
    3
    0% (0)
    2
    9% (1)
    1
    9% (1)
    82% Recommend this product (9 of 11 responses)
    By Douglas
    Murray, UT
    Not for the Cutmaster 42 / SL40 Plasma System
    December 22, 2018
    First, Cyberweld is awesome. Don't let this review interfere with their reputation. I bought this circle guide for my Cutmaster 42 with a SL40 torch. The mounting ears that hold the guide wheel and the radius rod hit the body of the torch and you cannot make a full circle cut without a lot of re-positioning of either the work piece our yourself. I called ESAB and they confirmed that, even though the adapter bushing fits, it was never designed for the SL40 torch. Save yourself the headache if you have the SL40. Cyberweld was quick to refund my purchase price once returned. I hope Cyberweld will do an update and state this on the product description - and not even offer the adapter bushing with this guide.
    ProsIt seems like a great guide for every other TD torch.
    ConsThe guide wheel can only go on the outside of the radius. It would be nice to have an option on the inside so you could cut "edge-to-edge" with a full circle. For that reason, I cannot recommend this for even the other torches.
    By DCW
    Arizona
    Well designed product for my plasma cutter
    November 30, 2017
    I needed this product to help me plasma cut sheet metal for a project I was working on. The product worked as described. I am very pleased I made this purchase from Cyberweld. Also, I appreciate the product arrived on time as promised.
    By Roger
    Sterling, Ma.
    Poor design
    May 27, 2016
    Had to cut support arm and wheel holders so I could make a complete circle with torch. Otherwise you could only do less than a half radius. Torch would not get close enough to material.
    ProsIt fits the torch head.
    ConsPoor design. Others I looked at were all metal. This one is metal / plastic.
    By Eileen
    Edgewood, New Mexico
    Perfect fit
    January 28, 2016
    This item was exactly what I was hoping it was. Very easy to install on Victor 52 plasma cutter. Really helps with getting a very clean cut and helps with speed and control. Easy to pivot head of cutter for a smooth curve and or circle.
    ProsGreat for cutting curves and circles. Really helps to steady your hand and control your speed. Helps greatly in keeping the cutting head perpendicular so you get a clean cut. Worth every penny I spent.
    ConsNone
    By Terry
    Ruidoso, NM
    purchased for cutting 18 in rings
    April 7, 2014
    completed the task with nice smooth cuts
    Proseasily adjustable. Holds a center very nice when you drill a pilot hole
    Consyou have to follow it around the radius. The adjustable posts don't allow the torch to rotate 360 degrees. It may be easier to use if it had a magnetic center attachment.
    By Scott
    Eureka, MO
    SATISFIED
    September 4, 2013
    The product showed up as expected. Though I have not used it yet, it appears to be exactly what I ordered.

    By Albert
    McAllen, Texas
    It does what it says
    February 18, 2013
    For some time I refused to buy this item because it is nothing fancy and you can make something substantially similar for a good bit less. That said, this is a good product, it's a simple design that works. It won't do your taxes but it is a good standoff and radius guide.
    By Ward R.
    West Jordan Utah
    Thermal Dynamics Radius/ Roller Guide Kit
    September 25, 2012
    I have tried a few things and am very happy with how it works and how easy it is to make circles and cuts.
    ProsBuilt very well and works great. My wife has projects of wall deco and plant holders all lined out.
    ConsNothing
    By JBC
    Charlotte,N.C.
    Roller Guide
    September 7, 2012
    Was exactly what I was looking for.
    Prosworked perfectly
    By Paul Y.
    Redding, California
    Radius/Roller Guide Kit
    May 2, 2012
    Easy to use and accurate in operation.
    A very satisfactory addition to my Cutmaster 42 plasma cutter
    ProsEase of use Accuracy
    ConsNothing
    By Mike
    St Paul, MN
    Great simple tool should be in all your toolboxes!
    March 8, 2012
    Needed to cut out a 3 foot circle out of 3/16" steel and this inexpensive tool saved me big $ over having a fab shop do it.
    It is simple to use and can be refigured to work in many ways. I had to cut my 3 foot circle out of a 3 foot piece of steel, which sounds right, but I had no edge or frame to run the outside roller on. This tool allowed me to spin the holder so the roller was in line with my cutting line and make a great cut. Very flexible and adaptable tool.
    I can use both rollers to make fantastic straight cuts as well. It holds the torch off the steel perfectly!
    I am thinking of a way to use a bearing in the torch holder so I can stand on one side of the bench while cutting, rather than scooting around the work piece, as the holder makes a rigid grab on the cutting torch.
    ProsSimple Easy to use Flexible set up Inexpensive Small - takes up little space when not in use
    ConsTorch holder could use a bearing/sleeve to allow it to spin while cutting

    back
    close menu
    Thermal Dynamics Radius/Roller Guide Kit 7-7501 detail
    Thermal Dynamics Radius/Roller Guide Kit 7-7501
    WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm www.P65Warnings.ca.gov