Miller Protective Cover #301382 is designed specifically for your Maxstar® or Dynasty® 210, 280 or 300 TIG welder.
Miller Dynasty 300 Multiprocess Welder 907819
Select Your Free Zone Promo Bonus
Miller® Dynasty® 300 Multiprocess Welder 907819
The Miller® Dynasty® 300 Multiprocess is a 300 amp welder that is capable of stick, advanced AC/DC TIG welding and MIG welding. When paired with a Miller voltage sensing wire feeder, the 300 Multiprocess is the only welder you'll need on the jobsite to perform MIG, Stick, AC/DC TIG welding and air carbon arc gouging.
The Dynasty 300 Multiprocess has built in TIG pulse and advanced AC/DC wave forms and provides up to 300 amps of welding output. Adjustable TIG pulse can be set from 0.1 to 500 pulses per second (pps). AC TIG frequency adjustment has a range from 20-400 Hz. Extremely low amperage TIG output allows you to go down to as low as 2 amps on AC and 1 amp on DC.
At just 55 pounds, the Dynasty 300 Multiprocess can weld materials up to 3/8 inch thick. When using a water-cooled TIG torch, the 300 Multiprocess utilizes Cooler-On-Demand™ technology to save energy and prolong the life of your optional TIG torch and Miller Coolmate™ 1.3 cooler. It also comes standard with CPS (Coolant Power Supply), an integrated 120V dedicated outlet for running your Coolmate water circulator.
IP23 rating This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.
Pipe and tube fabrication
Maintenance and repair
For MIG welding when paired with an OPTIONAL Miller voltage sensing feeder.
Ensures proper machine setup and parameter selection
Informative on-screen explanations and dynamic images enhance the parameter selection process
Including advanced waveforms and wide ranges of balance and frequency.
Reduces heat input; adds arc stability.
Provides the ability to easily update software, back-up settings and transfer saved weld programs from one unit to the next.
Allows easy naming, saving and recalling of favorite weld settings.
Deliver more productivity by eliminating the need to manually set the parameters
Deliver consistent quality by welders of all skills
Provides control of weld parameter ranges minimizing deviation from the welding procedure specification (WPS).
Eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse, and DIG parameters.
Provides state-of-the-art flexibility by automatically connecting to 208-575 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure.
Arc starting provides x-ray clean welds without the use of high frequency.
High-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity.
Operates the auxiliary cooling system only when needed, reducing noise, energy use, and airborne contaminants pulled through the cooler.
Fully compatible with Miller wireless remote control solutions
This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.
AC TIG Features
Controls the amount of heat going into the weld to minimize warping or distortion, especially on thin material.
Controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
Controls the width of the arc cone and the force of the arc.
DC TIG Features
Controls the amount of heat going into the weld to minimize warping or distortion, especially on thin material
For welding exotic materials.
Square provides a fast freezing puddle for ultimate arc control.
Sine produces a reduced audible sound and provides a more fluid puddle that is good for overlaying applications.
Triangular provides a quick-forming puddle while further reducing heat for thin materials.
Gives this unit MIG process capabilities when paired with a SuitCase® 8VS (or other voltage sensing feeder).
The feeder is powered off of the arc voltage of the power source and can run both solid and flux-cored wires
Stick Features (AC/DC)
Allows the arc characteristic to be changed for specific applications and electrodes.
Smooth running 7018 or stiffer, more penetrating 6010.
Adaptive control provides positive arc starts without sticking.
Adds stability for smoother welds when AC Stick welding.
Detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.
Comes complete with
Get a FREE Optrel® Panormaxx CLT Silver auto-darkening welding helmet with the purchase of this Miller® Dynasty® 300 Multiprocess welder. While supplies last. (No substitutions allowed.)
The Optrel® Panoramaxx CLT Silver auto-darkening welding hood features Crystal shade 2.0 light state that is unmatched in the world for color and clarity and provides up to 6X the viewing area of a standard 2" X 4" auto-dark welding lens. The key to this revolutionary technology is the size and shape of the ADF, coupled with the unique Panoramaxx shell design, which allows the welding lens to be positioned closer to your face. The Panoramaxx also has advanced features like SHADETRONIC®, which automatically adjusts the shade level based on the brightness of the arc and True Color, which allows for realistic color perception in light or dark states.
All Panoramaxx welding helmets now come with the revolutionary IsoFit® headgear. It is the only welding headgear in the world that wraps the entire crown of the head with multiple touch points to provide a custom fit like never before. Independent "three dimensional" size, width and height adjustments ensure all day comfort with a secure hold.
The Panoramaxx CLT has a built-in rechargeable battery that does not need replacing. The battery is charged through arc light or when manual charging is necessary, a micro USB charging port. It comes complete with micro USB cable, helmet bag and Oprel's 2+1 warranty.
Comes complete with
Miller® 301311 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 150 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Miller® TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 150 amp, ALL-IN-ONE Air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Miller® 301550 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Miller® 301549 TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Genuine Weldcraft™ W-280 300990 280 amp water-cooled TIG torch starter kit includes everything you need to operate the new Weldcraft Super Cool™ WP-280 with your TIG welder equipped with 50mm international (Dinse) receptacles, with 25 foot leads.