Miller Multimatic 255 w/Dual Cylinder & TIG Kit Package 951768
Select Your Free Zone Promo Bonus
Miller Multimatic® 255 Multiprocess Welder w/EZ-Latch™ Dual Cylinder Running Gear & TIG Kit Package 951768
The Miller Multimatic® 255 multi-process welder with EZ-Latch™ dual cylinder running gear and TIG kit is a complete 350 amp, portable welding package that is capable of MIG, Pulsed MIG, Stick, DC TIG and DC Pulsed TIG welding. The Multimatic® 255 comes complete with full color seven inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. In addition to built-in welding programs, the 255 can also store your custom welding programs. It seamlessly switches between welding with standard MIG gun or optional Spoolmatic™ spool gun. The 255 also features direct plug for XR push-pull gun for professional aluminum wire feed capability. This allows you to use 12 inch spools of aluminum MIG wire instead of the more expensive 1 lb rolls used with the spool gun.
EZ-Latch™ running gear with dual cylinder and elevated gun & cable rack gives unmatched portability to the Multimatic 255. For moving around the shop, your 255 welder attaches to the running gear through a series of four, quick-disconnect latches. For times when your 255 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 255 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit. The elevated gun and cable rack helps keep MIG guns, Spool Guns, TIG torches and cables out of the way for easier movement within the workspace.
NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in four steps and include: cart with front caster wheels, dual cylinder tray with rear wheels, dual cylinder post and gun & cable rack.
The Multimatic® 255 runs on 208 to 575 volt input power, using Miller's Auto-Line™ technology that automatically detects input voltage. It comes complete with TIG kit with 150 amp air-cooled TIG torch, MIG welding gun, shielding gas regulator with hose, stick electrode holder and ground clamp.
Pulsed MIG (GMAW-P
Flux Cored (FCAW)
DC TIG (DC GTAW)
DC Pulsed TIG (DC GTAW-P)
Available for MIG, pulsed MIG, stick and DC TIG processes with the ability to fine-tune your settings.
Set weld parameters by selecting:
MIG (shown) wire and gas type, wire diameter and material thickness
Stick electrode type, electrode diameter and material thickness
DC Lift-Arc™ TIG remote on/off, tungsten diameter and material thickness
Save up to four programs for each process.
Deliver more productivity by eliminating need to manually set parameters.
Deliver consistent quality by welders of all skill levels with prequalified settings.
Minimize supervisor intervention.
Lower heat input for less distortion on thin materials and better puddle control on out-of-position welds.
Less spatter minimizes post weld grinding and rework, allowing more welding time.
Perform welding applications that couldn't be done in the past.
Ideal for MIG welding aluminum and stainless steel.
This is a DC only machine. It cannot TIG weld Aluminum
Comes complete with
Get a FREE Miller® Digital Performance™ ClearLight™2.0 Black auto-darkening welding helmet with the purchase of this Multimatic® 255 welder. While supplies last. (No substitutions allowed.)
The Miller® Digital Performance™ Black auto darkening welding helmet features ClearLight™ 2.0 technology and a 4-year lens warranty. ClearLight 2.0 provides an enhanced welding experience with high definition optics and more realistic color hues in both light and dark states. The Digital Performance Clearlight 2.0 lens operates in weld, cut and grind modes and is DC TIG rated down to 5 amps. Lens switching speed has been upgraded to a lightning fast 1/25,000 second.
Improved digital controls now include half-shade settings and Auto-Sense™. Half-shade settings allow you to better customize your lens' dark state to your specific application needs. Auto-Sense™ allows you to set the ClearLight 2.0 lens' light sensitivity automatically. By pressing and holding the Auto-Sense control, the lens detects lighting conditions in your unique welding environment and sets the sensitivity for you. Sensitivity can also be set manually.
The Miller Digital Performance ClearLight 2.0 comes complete with Miller's Gen 3.5 headgear with comfort cushion and Miller's True Blue® four year lens warranty.
Digital Performance™ Features
- Weld Mode™ Shades #8 - 13
- Cut Mode™ Shades #5 - 8
- Grind Mode - Light State #3
Digital Performance™ Specs
Comes complete with
Genuine Pro Grip™ 230 Volt Extension Cord features 25' of 8/3 power cable with lighted NEMA 6.50 male plug and female receptacle at each end.
Genuine Pro Grip™ 230 Volt Extension Cord features 50' of 8/3 power cable with lighted NEMA 6.50 male plug and lighted female receptacle at each end.
Genuine Miller® Acculock™ S .035 Consumables Kit for your Miller MDX™-250 MIG gun.
Genuine Miller® Acculock™ S .045 Consumables Kit for your Miller MDX™-250 MIG gun.