Miller Maxstar 280 Multiprocess Welder (Tweco) 907552001
Code: 907552001
Select Your Free Zone Promo Bonus
Miller® Maxstar® 280 Multiprocess Welder (Tweco®) 907552001
The Miller® Maxstar® 280 Multiprocess (Tweco®) is a 280 amp welder that performs Pulsed- DC TIG, DC TIG, and stick, plus MIG and flux-cored welding; when paired with an OPTIONAL voltage sensing wire feeder. It features advanced DC TIG waveform controls, and comes complete with both Lift-Arc™ and high frequency TIG arc starts. The built-in TIG pulser can be set from 0 to 250 pulses per second (PPS).
The Maxstar 280 Multiprocess provides up to 280 amps of DC welding output. At just 47 pounds, the Maxstar 280 Multiprocess can weld up to 3/8 inch steel, yet weight hundreds of pounds less than comparable welders in the same welding output class. When paired with an OPTIONAL Miller® ArcReach® Suitcase 8 or 12 voltage-sensing wire feeder, the 280 Multiprocess becomes an excellent MIG or flux-cored welder.
Processes
Applications
Precision Fabrication
Petro Chemical
Aerospace
Food/Beverage Industry
Dairy
Shipboard
Features
DC TIG Features
Exceptionally smooth and precise arc for welding exotic materials.
Pulse - pulsing can increase puddle agitation, arc stability and travel speeds while reducing heat input and distortion.
Pulse Waveforms:
Square provides a fast freezing puddle for ultimate arc control.
Sine produces a reduced audible sound and provides a more fluid puddle that is good for overlaying applications.
Triangular provides a quick-forming puddle while further reducing heat for thin materials.
QuietPulse™
Activate QuietPulse by selecting sine or triangular waveshape to reduce audible noise.
DC Stick Features
Tailored arc control (DIG)
Allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start™
Adaptive control provides positive arc starts without sticking.
Stick-Stuck
Detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.
MIG Features
CV output of the power source gives this unit MIG process capabilities when paired with an ArcReach® SuitCase® feeder (or other voltage-sensing feeder).
The feeder is powered off the arc voltage of the power source and can run both solid and flux-cored wires.
This is a DC only machine. It cannot TIG weld Aluminum
Comes complete with
- Maxstar 280 Multiprocess Welder
- TWeco® cable receptacles
- Quick Reference Guide (English)
- Adjustable shoulder strap
- 8 ft (2.4 m) primary cord
- FREE Miller® T94i™ ClearLight™ 2.0 auto-darkening welding helmet welding helmet
Miller Protective Cover - Maxstar/Dynasty 210/280/300 301382
Miller Protective Cover #301382 is designed specifically for your Maxstar® or Dynasty® 210, 280 or 300 TIG welder.
Miller ArcReach Suitcase 8 Wire Feeder w/BTB 300 Amp Gun 951726001
Miller® SuitCase® ArcReach® 8 Wire Feeder with BTB 300 MIG gun is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable..
Free
Get a FREE Miller® Digital Performance™ CL2 auto-darkening welding helmet with purchase.
Expires: While supplies last.
See more
Miller® SuitCase® ArcReach® 8 Wire Feeder with BTB 300 MIG gun is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable.
Miller ArcReach SuitCase 12 Wire Feeder w/Q300 Gun 951729001
Free
Get a FREE Miller® Elite™ CL2 auto-darkening welding helmet with purchase.
Expires: While supplies last.
See more
Miller® SuitCase® ArcReach® 12 Wire Feeder with BTB 300 gun is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable.
Miller 150 Amp TIG/Stick Contractor Kit with RCCS-14 301311
Miller® 301311 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 150 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Miller 150 Amp TIG/Stick Contractor Kit with RFCS-14HD 301309
Miller® TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 150 amp, ALL-IN-ONE Air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Miller 200 Amp TIG/Stick Contractor Kit with RCCS-14 301550
Miller® 301550 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Miller 200 Amp TIG/Stick Contractor Kit with RFCS-14HD 301549
Miller® 301549 TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
Weldcraft W-280 TIG Torch Pkg. - 280 Amp Water-Cooled 300990
Genuine Weldcraft™ W-280 300990 280 amp water-cooled TIG torch starter kit includes everything you need to operate the new Weldcraft Super Cool™ WP-280 with your TIG welder equipped with 50mm international (Dinse) receptacles, with 25 foot leads.
Miller Small Runner Cart 301615
Genuine Miller® Small Runner Cart is designed to accommodate Maxstar® or Dynasty® 210 and 280 welders and a Coolmate 1.3 cooler.