Miller Dynasty 210 TIG Welder 907816

5.0
Rated 5.0 out of 5 stars
1 Review

Code: 907816

Skip to product information
1 of 2
Miller Dynasty 210 TIG Welder 907816
Miller Dynasty 210 TIG Welder 907816

Cyberweld Price $6,360.00
Cyberweld Price $6,360.00
Mfg Industrial Price: $7,342.98
(You Save $982.98)
Finance Options:
This item qualifies for free standard shipping.

Select Your Free Zone Promo Bonus

-
+
FAST & FREE SHIPPING On All Orders Over $99


Miller® Dynasty® 210 TIG Welder 907816

The Miller® Dynasty® 210 is an advanced 210 amp TIG welder that comes complete with AC/DC TIG pulse and wave form controls. Adjustable TIG pulse can be set from 0.1 to 500 pulses per second (pps). AC TIG frequency adjustment has a range from 20-400 Hz. Extremely low amperage TIG output allows you to go down to as low as 2 amps on AC and 1 amp on DC.

At just 47 pounds, the Dynasty 210 can go just about anywhere and run on just about any input power, single-phase or three-phase. Auto-Line™ senses input voltage and phase and instantly adjusts the welder to the optimal operational settings without manual linking. The simplified user interface with large 4.5 inch LCD display helps ensure proper weld parameters for your job. The Pro-Set™ mode eliminates the guesswork from set up by automatically choosing the most common weld settings for your application.

IP23 rating This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.



Processes
  • AC/DC TIG (GTAW)
  • Pulsed TIG (GTAW-P)
  • Stick (SMAW)

    Applications
    Shipbuilding
    Construction
    Precision fabrication
    Heavy fabrication
    Pipe and tube fabrication
    Rental
    Maintenance and repair



    Features
  • Easy-to-understand interface with 4.5-inch LCD display
    Ensures proper machine setup and parameter selection
    Informative on-screen explanations and dynamic images enhance the parameter selection process
  • Full AC features
    Including advanced waveforms and wide ranges of balance and frequency.
  • Built-in pulser
    Reduces heat input; adds arc stability.
  • USB Front panel port
    Provides the ability to easily update software, back-up settings and transfer saved weld programs from one unit to the next.
  • Program memory
    Allows easy naming, saving and recalling of favorite weld settings.
    Deliver more productivity by eliminating the need to manually set the parameters
    Deliver consistent quality by welders of all skills
  • Locks and limits
    Provides control of weld parameter ranges minimizing deviation from the welding procedure specification (WPS).
  • Pro-Set™ feature (professional settings)
    Eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse, and DIG parameters.
  • Auto-Line™
    Provides state-of-the-art flexibility by automatically connecting to 208-575 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
  • Lift-Arc™ TIG
    Arc starting provides x-ray clean welds without the use of high frequency.
  • Blue Lightning™ TIG
    High-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity.
  • Wireless remote compatible
    Fully compatible with Miller wireless remote control solutions
  • IP23 rating -
    This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.

    AC TIG Features
  • AC Pulsed TIG (0.1 to 500 pps)
    Controls the amount of heat going into the weld to minimize warping or distortion, especially on thin material.
  • AC Balance (30-99%)
    Controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
  • AC frequency (20-400 hz)
    Controls the width of the arc cone and the force of the arc.
  • Advanced AC Waveforms



    DC TIG Features
  • DC Pulsed TIG (0.1 to 500 pps)
    Controls the amount of heat going into the weld to minimize warping or distortion, especially on thin material
  • Exceptionally smooth and precise arc
    For welding exotic materials.
  • Pulse Waveforms
    Square provides a fast freezing puddle for ultimate arc control.
    Sine produces a reduced audible sound and provides a more fluid puddle that is good for overlaying applications.
    Triangular provides a quick-forming puddle while further reducing heat for thin materials.

    Stick Features (AC/DC)
  • Tailored arc control (DIG)
    Allows the arc characteristic to be changed for specific applications and electrodes.
    Smooth running 7018 or stiffer, more penetrating 6010.
  • Hot Start™
    Adaptive control provides positive arc starts without sticking.
  • AC frequency control
    Adds stability for smoother welds when AC Stick welding.
  • Stick-Stuck
    Detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.





    Comes complete with
  • Dynasty® 210 TIG Welder
  • Adjustable shoulder strap
  • 8 ft (2.4 m) primary cord
  • (2) Dinse 50-mm connectors
  • FREE Miller® T94i™ ClearLight 2.0 auto-darkening welding helmet
  • Miller Protective Cover - Maxstar/Dynasty 210/280/300 301382

    Miller Protective Cover - Maxstar/Dynasty 210/280/300 301382

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    Regular price
    $106.25
    Lowest Internet Price
    Mfg Industrial Price: $120.00
    $106.25
    You Save $13.75

    Miller Protective Cover #301382 is designed specifically for your Maxstar® or Dynasty® 210, 280 or 300 TIG welder.

    Miller 150 Amp TIG/Stick Contractor Kit with RCCS-14 301311

    Miller 150 Amp TIG/Stick Contractor Kit with RCCS-14 301311

    Regular price
    $1,240.00
    Lowest Internet Price
    Mfg Industrial Price: $1,542.00
    $1,240.00
    You Save $302.00

    Miller® 301311 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 150 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Miller 150 Amp TIG/Stick Contractor Kit with RFCS-14HD 301309

    Miller 150 Amp TIG/Stick Contractor Kit with RFCS-14HD 301309

    4.8
    Rated 4.8 out of 5 stars
    4 Reviews
    Regular price
    $1,346.00
    Lowest Internet Price
    Mfg Industrial Price: $1,670.00
    $1,346.00
    You Save $324.00

    Miller® TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 150 amp, ALL-IN-ONE Air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Miller 200 Amp TIG/Stick Contractor Kit with RCCS-14 301550

    Miller 200 Amp TIG/Stick Contractor Kit with RCCS-14 301550

    Regular price
    $1,405.00
    Lowest Internet Price
    Mfg Industrial Price: $1,755.00
    $1,405.00
    You Save $350.00

    Miller® 301550 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Miller 200 Amp TIG/Stick Contractor Kit with RFCS-14HD 301549

    Miller 200 Amp TIG/Stick Contractor Kit with RFCS-14HD 301549

    Regular price
    $1,509.00
    Lowest Internet Price
    Mfg Industrial Price: $1,880.00
    $1,509.00
    You Save $371.00

    Miller® 301549 TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Regular price
    From $19.99
    Lowest Internet Price
    Mfg Industrial Price:
    From $19.99
    You Save $0.00
    5.0
    Rated 5.0 out of 5 stars
    Based on 1 review
    Total 5 star reviews: 1 Total 4 star reviews: 0 Total 3 star reviews: 0 Total 2 star reviews: 0 Total 1 star reviews: 0
    1 review
    • GB
      George B.
      Verified Buyer
      I recommend this product
      Rated 5 out of 5 stars
      10 seconds ago
      Great welder

      Still waiting on two screws that were missing from the front bezel but otherwise, a great welder. Haven't had the chance to use it more than a few hours so far but compared to my old 210dx, this machine purrs. T joint welds that were causing me a problem on the old welder are simple and fast without the no burn- through I was getting before even though I'm using higher current.

    Reviews LoadedReviews Added