Weldcraft™ A-200 TIG Torch Package - 200A Air-Cooled WP-26-12-R

Genuine Weldcraft™ A-200, WP-26-12-R is a 200 amp air-cooled TIG torch with 12.5 ft. leads that is designed for heavy-duty TIG welding applications. The heavy copper construction and air cooled capability keep expenses low while still delivering maximum welding capacity in the field.

The Weldcraft A-200 TIG torch provides a comfortable grip and better torch control in all positions. The ergonomic torch design ensures proper relationship between the TIG torch and weld joint, with maximum comfort and maneuverability.

Applications:

Fabrication

Field Maintenance and Repair

In-Plant Maintenance and Repair

Schools/Training

Ship/Boat

Specs

Comes complete with:

A-200, WP-26 torch body

Handle

12.5 ft. one piece standard rubber power cable

One back cap

OPTIONAL AK3C Accessory Kit comes complete with

1 short back cap

3 Collets, 1/16, 3/32 & 1/8"

3 Collet bodies, 1/16, 3/32 & 1/8"

3 Alumina Nozzles, #5, #6, #8

3 Tungsten Electrode 2% Ceriated, 1/16, 3/32 & 1/8 X 7"

This item ships Free via standard ground shipping within contiguous U.S.

Accessories

Weldcraft TIG Torch Cable Cover WC-3-10

WC-3-10

7 Reviews

Mfg Industrial Price: $105.29

$56.20

You Save $49.09

Genuine Weldcraft™ WC-3 10 foot heavy duty nylon cable cover protects your TIG torch leads by helping to prevent cable cuts and abrasions.

Length: 10 ft

Weldcraft TIG Torch Power Adapter - 45V62

45V62

2 Reviews

Mfg Industrial Price: $41.63

$22.20

You Save $19.43

Weldcraft TIG Torch Power Adapter - 45V62

Miller TIG Torch Power Adapter - Solid 50mm DINSE 195379

195379

2 Reviews

Mfg Industrial Price: $135.60

$81.40

You Save $54.20

Miller TIG Torch Power Adapter 195379 - Solid 50mm DINSE (200 amp)

Weldcraft AK3C TIG Torch Accessory Kit

AK3C

1 Review

Mfg Industrial Price: $167.15

$89.15

You Save $78.00

Genuine Weldcraft™ AK3C TIG torch accessory kit for your water-cooled 18 series and air-cooled 26 series Weldcraft TIG torches.

Weldcraft Gas Lens TIG Torch Accessory Kit AK3GL

AK3GL

Mfg Industrial Price: $255.43

$136.25

You Save $119.18

Genuine Weldcraft® AK3GL Gas Lens TIG torch accessory kit for your water-cooled 18 series and air-cooled 26 series Weldcraft TIG torches.

Specifications

Download Weldcraft A-200 TIG Torch Spec Sheet (Requires Adobe Acrobat)
Download Weldcraft A-200 TIG Torch Spec Sheet (Requires Adobe Acrobat)

Ask & Answer

13 Questions & 13 Answers

Ask a Question

Andrew

from mendocino, California asked:

May 1, 2018

Is there a super flex hose that would be a direct replacement for this torch?

1 Answer

The only available replacement hose for the Weldcraft A-200 TIG Torch Package - 200A Air-Cooled WP-26 is Weldcraft Power Cable - 26 Series TIG Torches Code: 46V28R (12.5 ft) or use the drop down box to choose 46V30R (25 ft)

Submitted by: Cyberweld on May 2, 2018

Most Helpful Answer

Answer

Mark

from Omaha, Nebraska asked:

February 2, 2016

I am just looking for replacement torch head parts on a Chicago electric 165 amp inverter TIG/STICK welder part # 62486. I bought the machine new but missing the head torch parts. I called Chicago electric and they recommended WP-26 from domestic welding co. which brings up this package here. Will the optional AK3C accessory kit work for this machine? Can I just get the kit with out the torch package? The welder is set up for argon and amp foot pedal.

1 Answer

If your Chicago Electric tig torch is the equal to a Weldcraft A-200 TIG Torch 200A Air-Cooled WP-26 and you need collets, collet bodies, nozzles, etc for this torch you can use a Weldcraft AK3C or AK2C accessory kit.You can order these kits by going here. http://store.cyberweld.com/weaktigtoack1.html or http://store.cyberweld.com/weaktigtoack.html

Submitted by: Customer Service on February 2, 2016

Most Helpful Answer

Answer

Jordan priddle

from Ottawa ontario asked:

December 25, 2015

Is this torch compatible with an everlast 250 ex?

1 Answer

The Weldcraft A-200 TIG Torch Package - 200A Air-Cooled WP-26 can be used with the Everlast 250 ex with the proper adapters.. We do not offer the adapters for this installation.. Also keep in mind that the WP-26 is rated at 200 amps and the 250ex is rated at 250 amps.. As long as you are welding at 200 amps or below the WP-26 can be use without any problems

Submitted by: Customer Service on January 4, 2016

Most Helpful Answer

Answer

Ryan

from Florida asked:

August 1, 2014

Syncrowave 210?

1 Answer

You can install a Weldcraft A-200 TIG Torch Package - 200A Air-Cooled WP-26 on a Syncrowave 210.. You will need a 194723 tig torch adapter ($49.56).. This is not a stock item and would have to be special ordered

Submitted by: Customer Service on August 4, 2014

Most Helpful Answer

Answer

Dale

from Moscow, Idaho asked:

June 27, 2014

will this lead hook up to a miller 330 aircrafter made in 1990.

1 Answer

The Weldcraft A-200 TIG Torch Package - 200A Air-Cooled WP-26 can be used on the 330 Aircrafter with the 45v62 adapter..The A-200 torch is only rated at 200 amps .. The Aircafter is rated a 300amps with a 60% duty cycle and is capable of producing over 400 amps..Extended use of the A-200 Torch at the higher amperages will cause it to burn out

Submitted by: Customer Service on June 30, 2014

Most Helpful Answer

Answer

Brandon

from Houston, Texas asked:

June 17, 2014

Will this torch fit a Thermal Arc Fabricator 252i using a foot pedal?

1 Answer

The Weldcraft A-200 TIG Torch Package - 200A Air-Cooled WP-26 can be installed on the 252i .. You will also need the Miller 195379 tig torch adapter and the Thermal Arc Foot Control 600285 in order for the 252i to operate properly

Submitted by: Customer Service on June 17, 2014

Most Helpful Answer

Answer

Gregg

from Seattle, WA asked:

November 25, 2013

Will this torch fit a Thermal Arc 211i using a foot pedal?

1 Answer

Submitted by: Customer Service on November 26, 2013

Most Helpful Answer

Answer

Gregg

from Seattle asked:

November 25, 2013

Will this torch fit a thermal arc 211i?

1 Answer

You can install the Weldcraft TIG Torch Package - 200A Air-Cooled WP26 on the 211i..You would need a a Miller 195379 tig torch adapter , a Weldcraft 11n17 inert has adapter and a Smith Inert Gas Hose - 6' Single Black .. You would need to operat the 211i with a foot pedal control since this torch does not have remote finger tip control capability

Submitted by: Customer Service on November 26, 2013

Most Helpful Answer

Answer

mart phil

from New York asked:

March 14, 2013

will this torch fit the Lincoln Precision 225 TIG?

2 Answers

The Weldcraft TIG Torch Package - 200A Air-Cooled WP26 can be installed on your Precision Tig 225 .You will also need a Weldcraft Q5GT-200 adaptor ($77.25)

Submitted by: Customer Service on March 15, 2013

Most Helpful Answer

The Weldcraft TIG Torch Package - 200A Air-Cooled WP26 can be installed on your Precision Tig 225 .You will also need a Weldcraft Q5GT-200 adaptor ($77.25)

Submitted by: Customer Service on March 15, 2013

Most Helpful Answer

Answer

Clint

from Sweetwater, TX asked:

February 1, 2013

Will this tig torch with valve work with the Miller CST 280? What adapters maybe needed?

1 Answer

The Weldcraft TIG Torch Package - 200A Air-Cooled WP26 will work fine with the CST 280.. If your CST has Dinse style connectors you will need a Weldcraft Q5G-200 tig torch adapter..If your CST has Tweco style connectors you will need the Q5G-200 adapter plus a Miller 210061 Tweco to Dinse adapter

Submitted by: Customer Service on February 11, 2013

Most Helpful Answer

Answer

Clint

from Sweetwater, Texas asked:

January 31, 2013

Will this tig torch (with valve) work with the CST 280? Any adapters needed?

1 Answer

The Weldcraft TIG Torch Package - 200A Air-Cooled WP26 will work fine with the CST 280..If the CST280 has female Dinse receptacles you will need a weldcraft Q5G-200 adapter. If the CST 280 has female Tweco receptacles you will need the Q5G-200 plus a Miller 210061 Tweco to Dinse adapter.Also you will need an argon flow regulator and hose plus a Weldcraft 11N17 hose adapter.

Submitted by: Customer Service on February 1, 2013

Most Helpful Answer

Answer

joe

from northridge, ca asked:

November 8, 2012

will this torch work with a diversion 180?

Answer

Kevin

from Logan, Ohio asked:

October 5, 2012

is this torch compatible with syncrowave 200 ? if so, do i need the valve ?

1 Answer

The Weldcraft TIG Torch Package - 200A Air-Cooled WP26 can be installed on the syncrowave 200.. The torch will not require a valve but you will need a Weldcraft Q5GT-200 adapter kit

Submitted by: Customer Service on October 9, 2012

Most Helpful Answer

Answer

Reviews

1485408386

Write a Review

Review Summary

5.0

1 Reviews

100% (1)

0% (0)

100% Recommend this product (1 of 1 responses)

By Phil

New Zealand

Weldcraft A-200 torch

January 25, 2017

Usual good quality from Miller, comes with torch body and one piece cable, back cap and insulator, no cup or collet.