Description
Diamond Ground Piranha™ III Tungsten Grinder DGP-PG3-A
The newly redesigned Diamond Ground Piranha™ III tungsten grinder has the same great features as the previous Piranha III model PLUS enhanced safety and convenience. The new Piranha III has a sliding dust shield for 100% dust containment and an on/off switch with LED light. The new chassis weighs less and features a recessed handle, integrated receptacle for holding tungsten electrodes and blue powder coat finish.
Why use a dedicated tungsten grinder?
Safety: Enclosed grinding area captures Tungsten dust
for easy disposal.
Weld Quality: 20 Ra surface finish improves Tungsten
life, arc starting, arc stability and produces consistent
weld penetration.
Productivity: Longitudinally Diamond grind your
Tungsten electrode in less than 30 seconds correctly and
consistently.
Value: The PIRANHA III Diamond grinds, flats and
notches your Tungsten economically.
For .040" through 3/16" diameter tungsten electrode.
Features
Sliding dust shield for 100% dust containment
Easy set-up, optimal consistency and near-perfect repeatability.
Compact, durable and solid design with no vibration.
Longitudinal 20 RA grinding for maximum arc starting, arc
stability, electrode life & weld penetration.
Universal collet arm for 6 electrode sizes - 040" (1.0mm),
1/16" (1.6mm), 3/32" (2.4mm),1/8" (3.2mm) ,5/32" (4.0mm)
& 3/16" (4.8mm) - with no equipment changes.
Included angle scale for angles from 10 degrees - 60 degrees
Precision tip flat gauge & depth adjustment stop ensures
exact tungsten points every time - enabling consistent,
repeatable arc performance and welding output.
Containment baffle to keep dust inside the grinder
housing, for safety and easy disposal.
Tip flat block for square end grinding and removing
bad tips.
Electrode notching station for simple cut-off.
Integrated receptacle area for ease of handling electrodes
Recessed handle for better form & function
On/off switch with LED light for improved display of unit operation
Lightened chassis for reduced weight
Signature blue powdercoat
Vacuum-port ready
Detailed manual for valuable engineering data and
welding recommendations.
Specs
Range of Included Angle: 10 degrees - 60 degrees
Electrode Diameters: 040"(1.0mm),1/16" (1.6mm),
3/32" (2.4mm),1/8" (3.2mm) ,
5/32" (4.0mm) & 3/16" (4.8mm)
Minimum Electrode Length: 1.75" ( 44.5mm)
Voltage: 100/120 VAC, 50/60Hz
Power Consumption: 500 Watts
Motor: 1/10 hp, 3000rpm, 2.5 amps
Length: 13.5" (342mm)
Width: 7.0" (177mm)
Height: 9.5" (240mm)
Weight: 46 lbs (20.87kg)
This item ships Free via standard ground shipping within contiguous U.S.
