Home  //  Miller Welders  //  Miller Build With Blue™ Winter Savings Promotion  //  Miller Bobcat 260 w/Electric Fuel Pump & Remote Start/Stop 907792002  //  Miller Gas Engine Welder Protective Cover 300919

Miller Gas Engine Welder Protective Cover 300919

Code: 300919
Miller Gas Engine Welder Protective Cover 300919
Cyberweld Price: $164.55
Mfg Industrial Price: $185.39
(You Save:  $20.84)
13 Reviews
QTY:
FAST & FREE SHIPPING
Availability: Usually ships the next business day
9 Questions & 9 Answers



Miller® Gas Engine Welder Protective Cover 300919

Genuine Miller® protective cover for your gas powered Miller engine driven welder without running gear. Heavy-duty, water-resistant and mildew resistant covers protect and maintain the finish of the welder. Intended for use with Bobcat and Trailblazer welders that DO NOT have a running gear or protective cage.

Suitable for use with
  • Miller Bobcat® 225 manufactured after January 2012
  • Miller Bobcat® 250 manufactured after January 2012
  • Miller Bobcat® 250 EFI manufactured after January 2012
  • Miller Bobcat® 3 Phase manufactured after January 2012
  • Miller Trailblazer® 275 manufactured after September 2012
  • Miller Trailblazer® 275 EFI manufactured after September 2012
  • Miller Trailblazer® 325 manufactured after September 2012
  • Miller Trailblazer® 325 EFI manufactured after September 2012

    NOTE: NOT suitable for use with diesel engine models.

    This item ships Free via standard ground shipping within contiguous U.S.

    • 9 Questions & 9 Answers
    Ask a Question
    Marshall
    from Texas asked:
    January 21, 2020
    What cover is needed for Miller Bobcat 250.  Serial # MD281441R, Stock # 907500001


    Thanks

    1 Answer
    Miller® Gas Engine Welder Protective Cover 300919

    Genuine Miller® protective cover for your gas powered Miller engine driven welder without running gear. Heavy-duty, water-resistant and mildew resistant covers protect and maintain the finish of the welder. Intended for use with Bobcat and Trailblazer welders that DO NOT have a running gear or protective cage.


    Miller Bobcat® 250 manufactured after January 2012

    Submitted by: Cyberweld on January 22, 2020

    Answer
    kody
    from NY asked:
    January 2, 2020
    looking for a cover for a miller bobcat 250 s#LE487663
    1 Answer
    Miller® Gas Engine Welder Protective Cover 300919 will fit on your Bobcat.
    Submitted by: Cyberweld on January 6, 2020

    Answer
    Sean
    from Wellsville, Ohio asked:
    June 4, 2018
    Will this fit a miller trailblazer 325 with gfci?
    1 Answer
    Miller Gas Engine Welder Protective Cover 300919 will fit: Miller Trailblazer® 325 manufactured after September 2012 Miller Trailblazer® 325 EFI manufactured after September 2012
    Submitted by: Cyberweld on June 5, 2018

    Answer
    Steve
    from Mancos, Co. asked:
    January 22, 2018
    Will this cover fit a new 2018 trailblazer 325 efi propane?
    1 Answer
    Miller advises that the Miller Gas Engine Welder Protective Cover 300919 will fit with a current model Miller Trailblazer 325 EFI LP Welder 907727
    Submitted by: Cyberweld on January 24, 2018

    Answer
    Travis
    from South Carolina asked:
    January 7, 2017
    Would this cover work on a miller bobcat 225g plus?
    1 Answer
    Miller advises that this cover will not work for the Bobcat 225G Plus. The correct part number that you will need is Miller 040252. This would be a special order item and the price would be $152.00.
    Submitted by: Customer Service on January 24, 2017

    Answer
    Jim
    from Arkansas asked:
    August 20, 2016
    So why do some guys like to use these? For if the welder is routinely left outside in the elements or something? I've used a bobcat a lot and the housing seems to shield it well from the elements as is.. My bobcat does have slight paint fading but no big deal in my eyes since its a welder and not a corvette. But to each his own. Probably wouldn't buy myself for $150 but that's just me. I guess my actually question is does it work well for its intended purpose?
    1 Answer
    Generally guys purchase the Miller Gas Engine Drive Protective Cover 300919 when they by a new machine to provide extra protection for their machine. It is true that the Bobcats are designed to withstand the environment without a cover ,but the covers do work.. It is like why to some guys by car covers for there cars.?Do they need it.? No. But it does provide a little extra protection for their investment. The only drawback to a cover is having to remove it every time you need to run the machine.
    Submitted by: Customer Service on August 22, 2016

    Answer
    Paul
    from Batesville,IN. asked:
    September 29, 2015
    I have 2 Miller 250 bobcat welders s# kj301539 & la290125 what covers do I need
    1 Answer
    Both of your machines would use Bobcat Cover # 040252. These covers are priced at $149.00 each.. We do not stock this item but we can special order them for you..
    Submitted by: Customer Service on September 30, 2015

    Answer
    Helene S
    from Denver, NC asked:
    April 13, 2013
    Will this cover fit the Miller Bobcat 250 that was manufactured prior to 2012? If not, which protective cover would be used? Thank you.
    1 Answer
    Miller Engine Drive Protective Cover 300919 are different for specific years: Here is the link for Bobcats manufactured between Oct 2004 - Feb 2012 http://store.cyberweld.com/newboprco.html Here is the link for Bobcats manufactured before Oct 2004
    Submitted by: Customer Service on April 15, 2013

    Answer
    Bruce
    from Leesburg, VA asked:
    March 8, 2013
    is this cover suitable for Bobcat 250 serial nr LF258507 stock number 207911 thanks
    1 Answer
    Miller Engine Drive Protective Cover 300919 will not fit Bobcat 250 serial number LF258507 stock number 207911. Here is a link to the cover you would need: http://store.cyberweld.com/newboprco.html
    Submitted by: Customer Service on March 11, 2013

    Answer

    Write a Review
    Review Summary
    4.8
    13 Reviews
    5
    77% (10)
    4
    23% (3)
    3
    0% (0)
    2
    0% (0)
    1
    0% (0)
    100% Recommend this product (13 of 13 responses)
    By Nick B.
    Phillipsburg Kansas
    Welder cover
    May 2, 2019
    My cover fits great and I love how easy it is to protect my machine
    By Kevin
    Leicester NC
    Cyberweld takes care of customers!
    July 27, 2018
    Bought this cover and it arrived with pin holes and damage from manufacturer...
    I sent a picture and immediately got a phone call from them that they have contacted manifacturer and had them send me another one out.....
    By Bernie
    Alaska
    Engine cover
    April 27, 2018
    Cover fits well. Seams to be made of good material. My only problem was they said free shipping but had to charged me shipping anyway. Got it fairly fast.
    By Charles
    Arlington tx
    Good quality
    November 24, 2017
    Very good quality fit perfect
    By Norm
    Kaufman, TX
    Helps Keep the water out
    November 6, 2017
    This cover is good at keeping the rain out of your machine. When spring comes, we will see if it keeps the dirt daubers out.
    By h M.
    el paso texas
    owner
    October 25, 2017
    great
    Prosaaa
    Consaa
    By Mary K.
    B.G., Texas
    Very Good Service, Fits Well
    October 23, 2017
    I had some difficulty in making sure that I had the correct model. Customer Service was very helpful. They told me if I could call back with a Serial Number they could make sure I did get the correct model cover. The cover arrived, it fit well, and my husband is happy. It is stored out of the weather, so hopefully it will last for awhile.
    ConsAs a layperson, I found it difficult to know which model of cover to order. I had to ask Customer Service for assistance.
    By John
    Southbridge, MA
    Miller Gas Engine Drive Protective Cover
    April 23, 2017
    Engineered to fit and attach to your engine drive welder. The design incorporates a spot for the "lifting eye" and the exhaust tip.
    ProsDecent material thickness
    By CLARENCE
    rotan, tx
    tough cover
    February 24, 2016
    fits well and looks well made heavier than canvas sheds water well
    Prosappears to be durable
    By Tony
    Four Corners, New Mexico USA
    Fits!
    February 25, 2015
    This was basically FREE with my purchase, watch the sales and rebates people!
    ProsFits nicely on welder.
    By MATTHEW
    Denton, North Carolina
    PERFECT
    April 19, 2013
    FITS LIKE A GLOVE AND HELP KEEP MY INVESTMENT LOOKING NEW
    By Mark
    Jackson, KY
    Trailblazer 325 Cover
    March 4, 2013
    This cover fits very well. It seems to be very durable. I am very pleased with this purchase. Thank you Cyberweld.
    ProsVery durable material Fits Great Made in the USA
    By Ted
    Greenville,Tx
    BobCat Cover
    July 5, 2012
    Impressive contruction. I thought it was going to be a canvas type cover like I ordered for my Dynasty 200Dx but it turned out to be a naugahide thick cover with heavy stitching. Unfortunately the shipping invoice was put into the cover package and the printer ink transferred to the white Miller emblem but was removed without too much effort. I'm sure it will last for sometime.Thanks Guys.
    ProsHeavy Construction. Good straps. Fits well,
    ConsHope the emblem of Miller doesn't flake off the cover.