Home  //  MIG Guns And Parts  //  Miller MIG Guns And Parts  //  Miller MIG Gun & Spoolgun Parts and Consumables  //  Miller Gasless Flux Cored Nozzle 226190

Miller Gasless Flux Cored Nozzle 226190

Code: 226190
Miller Gasless Flux Cored Nozzle 226190
Cyberweld Price: $8.15
Mfg Industrial Price: $8.72
(You Save:  $0.57)
Availability: Usually ships the next business day

Miller Gasless Flux Cored Nozzle 226190

Package of 1 - Genuine Miller Gasless Flux-Cored Nozzle for use with self-shielding flux cored wires. Improves visibility, eases access in tight corners, protects tip adapter/gas diffuser from spatter and from shorting to the work piece.

For use with Miller M-10, M-15, M-25, M-40, M-100 and M-150 MIG guns. Flux-cored nozzle also fits certain Hobart "H" series MIG guns.

Suitable for
  • Millermatic® 135 & 140
  • Millermatic® 175 & 180
  • Millermatic® 210
  • Millermatic® 211
  • Millermatic® Passport® & Passport® Plus

  • 6 Questions & 6 Answers
    from Virginia asked:
    August 13, 2018
    I have a millermatic 251 with a m25 gun I need either a tapered copper nozzle or the plastic flux core nozzle I do a lot of flux core welding and I can't seem to find the correct nozzle the standard one gets too much slag inside of the diffuser
    1 Answer
    Miller does not make a flux cored nozzle for the M-25 gun. The nozzle with the smallest opening for the M-25 gun is Miller MIG Nozzle 169724
    Submitted by: Cyberweld on August 14, 2018

    from Macedon, NY asked:
    August 10, 2018
    Will this nozzle fit the Abicor Binzel Alpha1 gun?
    1 Answer
    Miller advises they can not confirm whether or not the Miller Gasless Flux Cored Nozzle 226190 will fit an Abicor Binzel gun
    Submitted by: Cyberweld on August 13, 2018

    from Moreno Valley, Ca asked:
    March 17, 2018
    WILL it fit the miller 141?
    1 Answer
    Miller Gasless Flux Cored Nozzle 226190 will fit on the Millermatic 141
    Submitted by: Cyberweld on March 19, 2018

    from Westfield, Indiana. asked:
    October 21, 2015
    Is there a Flux core nozzle such as this avalible for the Bernard Q150 that comes with the Miller Multimatic 200 ?
    1 Answer
    There is a flux cored nozzle available for the Bernard MIG Gun - 150 amp Q-Gun Q1510AB8BM it is part #NS-FLX and your cost would be $11.95. We do not stock this item but we can special order it for you.
    Submitted by: Customer Service on October 22, 2015

    Willy d
    from phoenix,az asked:
    January 10, 2014
    will this nozzle fit 1/2 inch bore mig gun
    1 Answer
    The Miller Gasless Flux Cored Nozzle 226190 is designed for use with Miller M-10, M-15, M-100 and M-150 MIG guns and certain Hobart "H" series MIG guns only
    Submitted by: Customer Service on January 10, 2014

    Roy Cooke
    from Oklahoma asked:
    November 19, 2012
    Does it fit the Hobart handler 210 thanks
    1 Answer
    The Miller Gasless Flux Cored Nozzle 226190 will fit on the Hobart Handler 210 mig gun
    Submitted by: Customer Service on November 20, 2012

    Review Summary
    12 Reviews
    75% (9)
    17% (2)
    0% (0)
    0% (0)
    8% (1)
    92% Recommend this product (11 of 12 responses)
    By Jon
    Montgomery, Texas
    Nozzle meets expectations
    October 18, 2018
    I did not have the proper nozzle to use with Flux Cored wire and this nozzle fits the bill
    By Tubbs
    Fayetteville, TN
    Miller Gasless Flux Cored Nozzle 226190
    September 22, 2018
    Does the job well. The material is hard plastic, which will prematurely melt if not careful. Best to use nozzle dip or spray to protect the plastic.
    ProsEasy to use Protects the gas ports
    ConsA little pricey
    By SnoGuy
    Libtardistan, Wa.
    Good quality
    June 20, 2018
    A must have if doing lots of FCAW. Easier to see that puddle, getting into tighter spaces or doing inside corners is a breeze. Contact Tip sticks out about 1/4 inch. Protects gas ports from spatter and shorting. It is a plastic, however it does not melt easily. I gave my first one away on a vault welding job (ie: forgot to get it back), so I bought another one, no hesitation. I should have bought 2.. just to have an extra.
    ProsDoes what its suppose to do.
    ConsNot included by Miller with all the wire feed welders that it fits.
    By Allen
    April 19, 2018
    Works just fine.
    By Tommy
    Deer Park, Tx.
    Miller flux core nozzle
    February 22, 2018
    These nozzles are a must if using flux core wire, they let you see much better than the original nozzle used for gas.
    By paul b.
    Flux core nozzle
    January 18, 2018
    Fits as they should. I haven't used in application yet. do not see a problem.
    By Ted C.
    Santa Fe New Mexico
    October 19, 2016
    Works great
    By Mike
    Palestine, Texas
    Great Nozzle
    February 20, 2016
    Great gasless nozzle for my miller. Helps see the weld better.
    ProsQuality product, fast shipping.
    By patrick
    Santa Fe New Mexico
    works as it should, could be a bit more durable
    May 7, 2015
    This works well but should be considered a very consumable consumable, if you get my drift. It protects the tip well, has great visibility and allows good reach in tight spots. I used it for pretty heavy duty use (oil pipe fencing) and it lasted for about 40 linear feet of fence before it started to crack apart. Not bad overall and worth it to me, but don't expect it to get the same longevity as a gas mig tip....wish they were a little cheaper, but all in all I'll continue to use them.
    By Kevin
    Dixon, MO
    Works as advertised
    March 9, 2015
    I have used this on both a Miller 211 and a Hobart 210 (Same machine really) and it does what it is supposed to do. I have read some negative reviews but I did not experience any melting issues. I wonder if those who had issues seated the nozzle all the way so that the welder tip has maximum stick out. This thing is really only protecting your gas holes and threads from spatter (I used to just wrap all of that with teflon tape to protect but this is way less ghetto. LOL) Cheap and easy. Cyberweld
    Proscheap and easy
    By Tony
    ronkonkoma NY
    Works Great
    January 21, 2015
    Fits & works like it should buy protecting the gas nozzle
    By Richard
    Metuchen NJ
    Flux core nozzle
    June 4, 2014
    Did not like it melted after 5 uses.

    close menu
    Miller Gasless Flux Cored Nozzle 226190 detail
    Miller Gasless Flux Cored Nozzle 226190
    WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm www.P65Warnings.ca.gov