Millermatic 252 MIG Welder 230/460/575 Volt 907322
The Miller® Millermatic® 252 MIG welder 907322 is a 250 amp, all-in-one MIG welding package that provides a superior arc when welding 22 gauge up to 1/2 in metal. Engineered for performance, the Active Arc Stabilizer provides the most consistent arc starts in its class along with optimum weld performance in all settings.
Aluminum welding setup is easy with the direct hookup of the optional Spoolmatic 30A. With Miller's exclusive Auto-Gun-Detect, simply pull the trigger for either gun and you're ready to weld.
The Millermatic® 252 features direct plug for XR push-pull gun for professional aluminum wire feed capability. XR-type guns can be directly connected to the Millermatic 252. This allows you to use 12 inch rolls of wire instead of the more expensive 1 lb rolls with the spoolgun. The 907322 is wired for 230/460/575 input voltage.Processes
Flux Cored (FCAW)
Maintenance and Repair
Light Industrial Applications
Highest output in its class (250 A at 28 VDC). Weld longer on high end applications.
Large, digital front panel with built-in digital timers menu enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Auto Gun Detect™ allows operator to simply pull trigger on MIG gun, spool gun, or push/pull gun. Automatically detects and recalls the voltage, wire feed speed, and timer of the active gun.
Push-Pull Gun Direct Connect - now directly connects your push-pull gun, no extra module required.
Angled, dual-gear driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
EZ-Access™ Consumable Compartment and Parameter Chart - set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.
Less weld cleanup with Active Arc Stabilizer™ patented Miller design provides excellent starts proven superior to the competition.
Fan-On-Demand™ cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
Line voltage compensation keeps power constant even if input voltages varies by +/- 10%.
Comes complete with:
Millermatic® 252 MIG Welder wired for 230/460/575 volt input power
15 ft (4.6 m), 250 amp MDX™-250 MIG gun for .030/.035 in wire
10 ft (3 m) Work cable with clamp
Factory - installed gas solenoid
Argon mix regulator/flow gauge and hose
10 ft (3 m) power cord and plug (200/230 V model only)
Factory-installed running gear with EZ-Change™ Low Cylinder Rack
.030/.035 in reversible drive rolls
Extra contact tips
FREE Miller® Classic ClearLight™ Black VS welding hood.
FREE Hobart® Fabshield® 21B 10 lb. spool .035 E71T-11 flux-cored welding wire.
Get a FREE Miller® Classic Clearlight™ Black VS auto-darkening welding helmet ($104.50 MSRP Value) PLUS a FREE 10 lb. spool of Hobart® Fabshield® 21B .035 E71T-11 flux-cored welding wire ($77.94 MSRP Value) with purchase of a Millermatic® 252 MIG welder. Expires 6/30/21. (No substitutions allowed.)
Miller® Welding Helmet - Black Classic VS ClearLight™ Variable Shade 8-13 Auto Darkening Lens 287803
The Miller® Black Classic welding helmet features ClearLight™ four color lens technology at a surprisingly economical price. ClearLight™ offers a bright, crisp, clear view of the weld puddle with more realistic color hues in both light and dark states. The Classic Clearlight™ lens operates in weld, cut and grind modes and is DC TIG rated down to 5 amps.
The Black Classic welding hood has two arc sensors and operates in both weld and grind mode. It has a replaceable battery with solar-assist (no recharging). This welding helmet measures up to your most common DIY and light industrial welding requirements. It is lightweight, comfortable and offers unsurpassed light-state clarity and exceptional battery life.
ClearLight™ lens technology optimizes contrast
and clarity in welding and light states - reducing eye strain and operator fatigue
Variable shade 8-13
Digital Controls With Three Operating Modes -
DC TIG rated down to 5 amps
1/1/1/2 optical clarity rating
Manual On/Auto-Off circuitry
Two independent arc sensors
Features magnifying lens holder
Extra protective lens covers included
- Weld Mode™ Shades #8 - 13
- Cut Mode™ Shades #5 - 8
- Grind Mode - Light State #3
Fabshield® 21B Features
E71T11 Self-Shielded, Flux-Cored Wire - no shielding gas needed
.035 wire diameter
Excellent for general purpose carbon steel welding applications.
Works well on galvanized steel.
All-position, single or multiple pass
This item ships Free via standard ground shipping within contiguous U.S.