Millermatic® 252 MIG Welder with Spoolmatic 30A 230/460/575 Volt 951066
The Miller® Millermatic® 252 MIG Welder 951065 with Spoolmatic 30A Spoolgun is an outstanding 250 amp package for aluminum MIG welding. This complete MIG welding package includes Millermatic® 252 MIG welding powere source (230/460/575 Volt) and all accessories, Spoolmatic 30A (30 foot lead) 1 lb. Spool Gun (Duty Cycle 200 amps @ 100%), EZ-Change dual cylinder rack with elevated Gun and Cable Rack.
The Millermatic® 252 is an all-in-one MIG welder that provides a superior arc when welding 22 gauge up to 1/2 in metal. Engineered for performance, the Active Arc Stabilizer provides the most consistent arc starts in its class along with optimum weld performance in all settings.
Aluminum welding setup is easy with the direct hookup of the Spoolmatic 30A spool gun. With Miller's exclusive Auto-Gun-Detect, simply pull the trigger for either gun and you're ready to weld.
The Millermatic® 252 features direct plug for XR push-pull gun for professional aluminum wire feed capability. XR-type guns can be directly connected to the Millermatic 252. This allows you to use 12 inch rolls of wire instead of the more expensive 1 lb rolls with the spoolgun.
Flux Cored (FCAW)
Maintenance and Repair
Light Industrial Applications
Highest output in its class (250 A at 28 VDC). Weld longer on high end applications.
Large, digital front panel with built-in digital timers menu enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Auto Gun Detect™ allows operator to simply pull trigger on MIG gun, spool gun, or push/pull gun. Automatically detects and recalls the voltage, wire feed speed, and timer of the active gun.
Push-Pull Gun Direct Connect - now directly connects your push-pull gun, no extra module required.
Angled, dual-gear driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
EZ-Access™ Consumable Compartment and Parameter Chart - set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.
Larger work area - now with longer 15-ft M-25 gun.
Less weld cleanup with Active Arc Stabilizer™ patented Miller design provides excellent starts proven superior to the competition.
Fan-On-Demand™ cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
Line voltage compensation keeps power constant even if input voltages varies by ±10%.
Comes complete with:
Millermatic® 252 MIG Welding Power Source wire for 230/460/575 input voltage
Spoolmatic 30A Spool gun
15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in wire
10 ft (3 m) Work cable with clamp
Factory - installed gas solenoid
2 - Argon mix regulator/flow gauge and hose
Factory-installed running gear with EZ-Change™ Low Dual Cylinder Rack with Elevated Gun and Cable Rack
.030/.035 in reversible drive rolls
Extra contact tips
Cylinders NOT included
FREE Miller® Digital Performance™ ClearLight™ auto-darkening welding hood.
FREE Hobart® Fabshield® 21B 10 lb. spool .035 E71T-11 flux-cored welding wire.Get a FREE Miller® Digital Performance™ ClearLight™ Black auto-darkening welding helmet ($255 MSRP Value) PLUS a FREE 10 lb. spool of Hobart® Fabshield® 21B .035 E71T-11 flux-cored welding wire ($73.00 MSRP Value) with purchase of a Millermatic® 252 MIG welder with Spoolmatic® 30A spool gun. Expires 12/31/18. (No substitutions allowed.)Digital Performance™ Features
ClearLight™ lens technology optimizes contrast
and clarity in welding and light states - reducing eye strain and operator fatigue
Digital Controls With Three Operating Modes -
Improved headgear features additional adjust-ability settings for better fit & comfort
Quick-release front cover lens assembly
- Weld Mode™ Shades #8 - 13
- Cut Mode™ Shades #5 - 8
- Grind Mode - Light State #3
Comes complete with
5 outside cover lenses
2 inside cover lenses
Three year warranty
Fabshield® 21B Features
E71T11 Self-Shielded Wire - no shielding gas needed
.035 wire diameter
Excellent for general purpose carbon steel welding applications.
Works well on galvanized steel.
All-position, single or multiple pass
PLUS get up to $200 in additional Build With Blue™ Cash Rebates when you purchase a Millermatic® 252 MIG welder AND Miller® or Hobart® branded welding accessories or filler metals. Additional accessories MUST be purchased at the same time as the welder. Download Build With Blue™ Rebate Submission Instructions HERE. All rebate forms MUST be submitted electronically to Miller no later than January 15, 2019. Offer expires 12/31/18.
This item ships Free via standard ground shipping within contiguous U.S.