47 Questions &
51 Answers
Adam
from Ward, Arkansas asked:
February 29, 2020
Will this fit under the Viking 3350 welding helmet
1 Answer
Miller® LPR-100 Half Mask Respirator (Small/Medium) ML00894 will fit under most welding helmets.
Submitted by:
Cyberweld
on March 2, 2020
Most Helpful Answer
Robert B
from CA asked:
February 26, 2020
1 Answer
Miller® LPR-100 Half Mask Respirator is only available in s/m or m/l.
Submitted by:
Cyberweld
on February 27, 2020
Most Helpful Answer
Dwight E
from Maryland asked:
October 22, 2019
Does this item come with a storage bag?
1 Answer
Miller® LPR-100 Half Mask Respirator (Small/Medium) ML00894 does not come with a storage bag.
Submitted by:
Cyberweld
on October 25, 2019
Most Helpful Answer
C. M.
from Tacoma, WA asked:
September 28, 2018
Will the Optrel Panoramaxx helmet fit over the the LPR-100 resperator?
1 Answer
Miller LPR-100 Half Mask Respirator (S/M) ML00894 will fit under the Optrel Panoramaxx Welding Helmet 1010.000
Submitted by:
Cyberweld
on September 28, 2018
Most Helpful Answer
Donald R
from North Carolina asked:
August 13, 2018
Will LPR-100 provide protection against vapor/ fumes for spray painting in a open area?
1 Answer
No, the Miller LPR-100 Half Mask Respirator ML00894 is not designed to protect against paint fumes.
Submitted by:
Cyberweld
on August 13, 2018
Most Helpful Answer
Frank
from Lincoln Illinois asked:
August 7, 2018
Will this fit under the 3m 9100v ?
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will fit under the 9100v helmet.. You will have to adjust the front to back depth on the head gear.
Submitted by:
Cyberweld
on August 8, 2018
Most Helpful Answer
Chad
from Bozeman, MT asked:
March 14, 2018
Does this product protect against zinc oxide fumes, and how often do the filters need to be changed?
1 Answer
Miller advises that the Miller LPR-100 Half Mask Respirator (S/M) ML00894 will protect against zinc oxide fumes. There is no way know how long the filters in the Miller LPR-100 Half Mask Respirator ML00894 will last before they need to be changed. This will depend on the environment that they are being used. In general if breathing becomes difficult it is time to change the filters. In order to get a accurate change interval time you should consult with an Industrial Hygienist. They can sample the air in the environment and then determine the change interval needed
Submitted by:
Cyberweld
on March 19, 2018
Most Helpful Answer
Kim
from South Dakota asked:
January 7, 2018
Can this filter gasoline exhaust fumes from a chainsaw?
1 Answer
No, the Miller LPR-100 Half Mask Respirator ML00894 is not designed to protect against gas fumes
Submitted by:
Customer Service
on January 9, 2018
Most Helpful Answer
Laramy P
from Whitehall WI asked:
June 1, 2017
Will the lpr-100 work for silica dust at a sand mine
1 Answer
Miller does not advise using the Miller LPR-100 Half Mask Respirator ML00894 for silica dust at a sand mine. They suggest you have an industrial hygienist visit to fit for the proper breathing protection.
Submitted by:
Customer Service
on June 9, 2017
Most Helpful Answer
Zachary
from Wabash, Indiana asked:
April 20, 2017
Will this respirator fit under the 3M Speedglas Welding Helmet - 9100XXi Auto Dark Lens 06-0100-30iSW?
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will fit under the 9100xxi helmet.. You will have to adjust the front to back depth on the head gear.
Submitted by:
Customer Service
on April 27, 2017
Most Helpful Answer
Kenny
from Florida asked:
February 21, 2017
Will this product protect against paint fumes
1 Answer
No, the Miller LPR-100 Half Mask Respirator ML00894 is not designed to protect against paint fumes.
Submitted by:
Customer Service
on March 9, 2017
Most Helpful Answer
pete
from Los Angeles, CA asked:
February 6, 2017
Can you tell me how the sizing is on this mask? I'd probably wear a medium, so is it best to go s/m or m/l in your opinion? How small is the s/m? Thanks
1 Answer
Miller advises that the majority of users will be fine with the Miller LPR-100 Half Mask Respirator ML00894. But due to so many variations in the human face from one person to the next it is difficult to assign a mask size as you would a shirt or a pair of pants. In general if you wear a size XL or smaller clothing the Miller LPR-100 Half Mask Respirator ML00894 should work fine. If you wear 2XL or larger then the Miller LPR-100 Half Mask Respirator w/Odor Relief ML00994 may be a better choice. This is just a rule of thumb and will not be 100% accurate. To get a proper fit you should consult with a industrial hygienist
Submitted by:
Customer Service
on February 6, 2017
Most Helpful Answer
Tim
from Missouri asked:
October 2, 2016
Approximately how long or how much use will you get out of each set of filters I imagine the more vigorous the work the less time you would get out of each set but I'm curious as to how long they last before replacing.
1 Answer
There is no way know how long the filters in the Miller LPR-100 Half Mask Respirator ML00894 will last before they need to be changed. This will depend on the environment that they are being used. In general if breathing becomes difficult it is time to change the filters. In order to get a accurate change interval time you should consult with an Industrial Hygienist. They can sample the air in the environment and then determine the change interval needed
Submitted by:
Customer Service
on October 3, 2016
Most Helpful Answer
Matt
from North New Jersey asked:
May 27, 2016
I know that this respirator works to protect when welding, but can it also be used for a long day of belt sanding and grinding? I make knives, so I am wondering if I can also use this respirator for the days that I grind almost the entire day. I am hoping this respirator will do both. Thanks
1 Answer
Miller advises that the Miller LPR-100 Half Mask Respirator ML00894 can be used as protection when sanding or grinding
Submitted by:
Customer Service
on May 31, 2016
Most Helpful Answer
Tyler Rhoades
from Johnstown, Colorado asked:
May 4, 2016
How well does the mask work when welding?
1 Answer
The The Miller ML00894 Half Mask Respirator works well and will fit under most welding helmets.It filters 99.97 percent of welding fumes and mists including airborne particles and oil aerosols, hazardous solid dust particles, metal fumes and mists including: hexavalent chromium metal, stainless steel, galvanized steel, steel/manganese alloys, aluminum, cadmium and lead fumes
Submitted by:
Customer Service
on May 5, 2016
Most Helpful Answer
francisco garcia
from Oneonta Al asked:
February 3, 2016
does this respiratory protects you good enough from the smoke of the weld and when you grind????
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 removes airborne particles and oil aerosols, hazardous solid dust particles, metal fumes and mists including: hexavalent chromium metal, stainless steel, galvanized steel, steel/manganese alloys, aluminum, cadmium and lead fumes that are generally associated with welding and grinding
Submitted by:
Customer Service
on February 4, 2016
Most Helpful Answer
Dylan
from Archbald Pennsylvania asked:
July 12, 2015
Hey I was wondering if this could fit under the Miller Welding Helmet - Titanium 7300 because some reviews say it doesn't fit fully under they're Miller titanium helmet so they can close it all the way I was wondering if this would happen with mine and what size I should pick the s/m or the m/L. please tell me if this will be a problem and what size please. Thank you.
1 Answer
We are not aware of any interference problems when using a Miller LPR-100 Half Mask Respirator ML00894 with a Miller Titanium 7300 and we contacted Miller to see if they are experiencing any problems in this regard. They indicated that they not receiving any complaints of interference problems. They also indicated that a problem may occur if the user has a large head and does not have the helmet headband adjusted forward enough. Miller advises that the majority of users will be fine with the Miller LPR-100 Half Mask Respirator ML00894.But due to so many variations in the human face from one person to the next it is difficult to assign a mask size as you would a shirt or a pair of pants. In general if you wear a size XL or smaller clothing the Miller LPR-100 Half Mask Respirator ML00894 should work fine. If you wear 2XL or larger then the Miller LPR-100 Half Mask Respirator w/Odor Relief ML00994 may be a better choice. This is just a rule of thumb and will not be 100% accurate. To get a proper fit you should consult with a industrial hygienist.
Submitted by:
Customer Service
on July 14, 2015
Most Helpful Answer
mtnmover
from Missouri asked:
June 7, 2015
How does one know what size to order {S} or [L] . Thanks
1 Answer
Miller advises that the majority of users will be fine with the Miller LPR-100 Half Mask Respirator ML00894.But due to so many variations in the human face from one person to the next it is difficult to assign a mask size as you would a shirt or a pair of pants. In general if you wear a size XL or smaller clothing the Miller LPR-100 Half Mask Respirator ML00894 should work fine. If you wear 2XL or larger then the Miller LPR-100 Half Mask Respirator w/Odor Relief ML00994 may be a better choice. This is just a rule of thumb and will not be 100% accurate. To get a proper fit you should consult with a industrial hygienist.
Submitted by:
Customer Service
on June 8, 2015
Most Helpful Answer
Mandi
from Massachusetts asked:
May 31, 2015
What is the sizing difference between the S/M and the M/L? Is this based on head circumference? How can you tell which size will fit best? Thanks?
1 Answer
Miller advises that the majority of users will be fine with the Miller LPR-100 Half Mask Respirator ML00894.But due to so many variations in the human face from one person to the next it is difficult to assign a mask size as you would a shirt or a pair of pants. In general if you wear a size XL or smaller clothing the Miller LPR-100 Half Mask Respirator ML00894 should work fine. If you wear 2XL or larger then the Miller LPR-100 Half Mask Respirator w/Odor Relief ML00994 may be a better choice. This is just a rule of thumb and will not be 100% accurate. To get a proper fit you should consult with a industrial hygienist.
Submitted by:
Customer Service
on June 3, 2015
Most Helpful Answer
Jim Alex
from Micigan asked:
March 31, 2015
when will you have the M/L available?
1 Answer
The Miller LPR-100 Half Mask Respirator size M/L should be in stock and appear on our site within the next week
Submitted by:
Customer Service
on April 1, 2015
Most Helpful Answer
ERWIN C&C WELDING
from TN asked:
February 9, 2015
DOES THIS MASK COME IN SIZES?
1 Answer
Currently the Miller LPR-100 Half Mask Respirator ML00894 is available in only one size (small/ medium) which will fit most people.. In the very near future Miller will be introducing a larger size (medium / large) version of this respirator
Submitted by:
Customer Service
on February 9, 2015
Most Helpful Answer
Tyler
from York, PA asked:
June 11, 2014
Does this mask come with any extra filters? Or do they have to be purchased separately.
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 does not come with extra filters.. The replacement filters can be purchased separately under part # SA00818 ($9.25)
Submitted by:
Customer Service
on June 12, 2014
Most Helpful Answer
Jim
from Martin mi asked:
June 11, 2014
Will this mask fit while wearing Save Phace™ Tactical Safety Goggle - Grunt
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 can be worn with the Save Phace™ Tactical Safety Goggle - Grunt . It is not a very comfortable fit due to interference between the goggle head straps and the respirator head straps
Submitted by:
Customer Service
on June 12, 2014
Most Helpful Answer
roy ponder
from denton,tx asked:
May 18, 2014
will this respirator protect from galvanized steel fumes?
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will filter out any galvanized particles however it may allow galvanize fumes to pass though.. Miller advises that the Miller LPR-100 Half Mask Respirator ML00894 is approved for welding galvanize
Submitted by:
Customer Service
on May 19, 2014
Most Helpful Answer
Roy Ponder
from Denton,Tx asked:
May 18, 2014
what is the difference in osha and niosh certified?
1 Answer
To put it simply NIOSH is the agency that certifies that the Miller LPR-100 Half Mask Respirator ML00894 meets their specifications for filtration and user protection.. OSHA is the agency that will go to the workplace to determine that the proper safety standards are being met. Including that the respirators being used are NIOSH certified
Submitted by:
Customer Service
on May 19, 2014
Most Helpful Answer
Ryan
from Connecticut asked:
April 9, 2014
I weld materials with lead based pants do you make filters for this respirator to filter out those lead fumes?
2 Answers
Miller advises that the Miller LPR-100 Half Mask Respirator ML00894 has a Assigned Protection Factor (APF) of 10 which will be good for lead fumes
Submitted by:
Customer Service
on April 10, 2014
Most Helpful Answer
Miller advises that the Miller LPR-100 Half Mask Respirator ML00894 has a Assigned Protection Factor (APF) of 10 which will be good for lead fumes
Submitted by:
Customer Service
on April 10, 2014
Most Helpful Answer
Brandon
from Dalton ga asked:
April 6, 2014
will this fit under a Jackson trusight welding helmet?
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will fit under the Jackson Trusight helmet.. You may have to adjust the in out adjustment on the headgear.
Submitted by:
Customer Service
on April 8, 2014
Most Helpful Answer
joseph
from louisiana asked:
March 13, 2014
hi ok i like the mask .... were can i find the filters for this mask here in louisiana they dont have any thing like this
2 Answers
We have replacement filters for the Miller LPR-100 Half Mask Respirator ML00894 on our web site.. You can go here to order themhttp://store.cyberweld.com/milprefisa.html..You will need to contact Miller directly to find out who in Louisiana sell this item
Submitted by:
Customer Service
on March 17, 2014
Most Helpful Answer
We have replacement filters for the Miller LPR-100 Half Mask Respirator ML00894 on our web site.. You can go here to order themhttp://store.cyberweld.com/milprefisa.html..You will need to contact Miller directly to find out who in Louisiana sell this item
Submitted by:
Customer Service
on March 17, 2014
Most Helpful Answer
Don
from Tahoe City, CA asked:
December 28, 2013
Will this respirator work for users that wear glasses?
Thanks
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 can be worn with most style of eye glasses
Submitted by:
Customer Service
on January 7, 2014
Most Helpful Answer
Ryan
from ky asked:
December 8, 2013
Would this respirator meet the standards for welding fumes and spatter spray fumes wile welding low and high carbon steels?
1 Answer
Miller advises that the Miller LPR-100 Half Mask Respirator ML00894 will meet the standards for the applications you have described.. It will filter out any particles 3 microns or larger
Submitted by:
Customer Service
on December 9, 2013
Most Helpful Answer
Sami
from Chicago, ILL asked:
September 27, 2013
What does recommend or which mask you recommend for Radio Active Material Radiation, Nuclear Radiation, I am planning to go to Japan and I need very good Respirator, I look forward to your reply.
1 Answer
TheMiller LPR-100 Half Mask Respirator ML00894 is a particulate filter respirator and is not designed for Nuclear Radiation usage.. We do not offer any respirators for this service.. We suggest that you contact an industrial hygientist regarding your needs
Submitted by:
Customer Service
on October 8, 2013
Most Helpful Answer
DJ
from seattle asked:
August 10, 2013
WIll this respirator fit under 3M speedglas 9100xx?
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will fit under the 9100xx helmet.. You will have to adjust the front to back depth on the head gear
Submitted by:
Customer Service
on August 12, 2013
Most Helpful Answer
peter
from shelburne, vt asked:
July 12, 2013
does it come in different sizes? Such as for a small woman.
1 Answer
The Miller LPR-100 Half Mask Respirator is one size fits most.
Submitted by:
Customer Service
on July 15, 2013
Most Helpful Answer
Cameron
from south carolina asked:
July 2, 2013
Does it come with a set of replacement filters?
1 Answer
No..The Miller LPR-100 Half Mask Respirator ML00894 comes only with one set of filters.. If you need replacement filters you would need to order Miller LPR-100 Replacement Filters SA00818
Submitted by:
Customer Service
on July 3, 2013
Most Helpful Answer
Don
from seatlle asked:
June 13, 2013
Will this mask fit under the Jackson WH40 Balder helmet?
2 Answers
The Miller LPR-100 Half Mask Respirator ML00894 will fit under the Balder wh40 helmet
Submitted by:
Customer Service
on June 14, 2013
Most Helpful Answer
The Miller LPR-100 Half Mask Respirator ML00894 will fit under the Balder wh40 helmet
Submitted by:
Customer Service
on June 14, 2013
Most Helpful Answer
Annette
from CO asked:
December 17, 2012
How often do you replace the filter
2 Answers
The manufacturer recommends that the filters used with the Miller LPR-100 Half Mask Respirator ML00894 be changesd once a month or more frequently if a resistance to breathing occurs
Submitted by:
Customer Service
on December 19, 2012
Most Helpful Answer
The manufacturer recommends that the filters used with the Miller LPR-100 Half Mask Respirator ML00894 be changesd once a month or more frequently if a resistance to breathing occurs
Submitted by:
Customer Service
on December 19, 2012
Most Helpful Answer
Corbin
from Lebanon, OR asked:
December 11, 2012
Does this mask filter out fumes produced from aluminum?
1 Answer
Miller advises that the LPR-100 Half Mask Respirator ML00894 is a particulate filter respirator.. It will filter out any aluminum particles carried in the fumes.
Submitted by:
Customer Service
on December 12, 2012
Most Helpful Answer
Dennis
from Marysville, California asked:
November 18, 2012
Will this mask filter out carbide fumes ?
1 Answer
Miller advises that the Miller LPR-100 Half Mask Respirator ML00894 is a particulte filter respriator and will not filter out fumes
Submitted by:
Customer Service
on November 20, 2012
Most Helpful Answer
Jim
from Greentown In asked:
November 2, 2012
Is this mask good for woodworking?
Ryan K
from burbank, ca asked:
October 14, 2012
does the miller lpr-100 protect against paint fumes? " spray paint"
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will not protect against paint fumes.
Submitted by:
Customer Service
on October 16, 2012
Most Helpful Answer
Cheryl
from Waukesha, Wisconsin asked:
September 27, 2012
Can this respirator be used to protect the operator when welding on stainless steel and generating hexavalent chromium fumes?
1 Answer
The Miller LPR-100 Half Mask Respirator ML00894 will protect the operator against hexavalent chromium fumes.
Submitted by:
Customer Service
on October 2, 2012
Most Helpful Answer
John
from Rochester N.Y. asked:
September 11, 2012
Are these filters rated for all welding?
1 Answer
The Miller LPR-100 half mask respirator is a P100 respirator and is rated for all types of welding fumes, including flux-cored, galvanized and hex-chrome (stainless). The assigned protection factor (APF) is 10. If you are working in a shop with heavy smoke and fume, you'll need to have an industrial hygenist tell you whether an APF of 10 is sufficient with your shop atmosphere.
Submitted by:
Customer Service
on September 13, 2012
Most Helpful Answer
John
from kalamazoo, mi asked:
September 5, 2012
Is this unit a one size fits all? If there are different sizes available what are the different sizes?
1 Answer
The Miller LPR-100 Half Mask Respirator is one size.
Submitted by:
Customer Service
on September 6, 2012
Most Helpful Answer
PAUL
from MIAMI asked:
August 29, 2012
DOES THIS FILTER HAVE ACTIVATED CHARCOAL??
PLEASE LET ME KNOW.
2 Answers
The Miller ML00894 Mask Respirator does not have any activated charcoal.
Submitted by:
Customer Service
on August 30, 2012
Most Helpful Answer
The Miller ML00894 Mask Respirator does not have any activated charcoal.
Submitted by:
Customer Service
on August 30, 2012
Most Helpful Answer
Mondi
from Winnipeg, Manitoba Canada asked:
August 24, 2012
I'm having problems in checkout.. Do you ship to Winnipeg Manitoba Canada???
1 Answer
Cyberweld no longer ships to Canada. If you have an address in the contiguous United States to ship to who can forward it to you in Canada we can do that but we cannot ship directly to you.
Submitted by:
Customer Service
on August 28, 2012
Most Helpful Answer
tim
from Phoenix, AZ asked:
August 8, 2012
What is the part number for the filters and where can i get them ?
1 Answer
The part number for the replacement filter for the Miller LPR-100 Half Mask Respirator is SA00818.
These filters can be found at www.cyberweld.com
Submitted by:
Customer Service
on August 8, 2012
Most Helpful Answer
Alex B
from Twin Falls, Idaho asked:
August 6, 2012
Does this mask filter out galvanized fumes
1 Answer
Yes, the LPR-100 respirator is a P-100 rated respirator and will filter galvanized fumes.
Submitted by:
Customer Service
on August 9, 2012
Most Helpful Answer
