Miller Maxstar® 280 TIG Welder With CPS 907538
Miller Maxstar® 280 TIG Welder with CPS (Cooler Power Supply) provides up to 280 amps of DC TIG arc and Stick arc welding output. At just 50 pounds, the Maxstar 280 can weld up to 3/8 inch steel, yet weight hundreds of pounds less than comparable welders in the same welding output class. The Maxstar 280 TIG welder provides the basic features that are required for most DC TIG or STICK welding applications using a simple, menu-driven interface. The 280 also has a built-in pulser capable of 0-250 PPS.
DC TIG (GTAW)
Pulsed TIG (GTAW-P)
Air Carbon Arc (CAC-A)
Upgradeable and expandable.
Front panel memory card data
port provides the ability to easily
upgrade software and expand
Pro-Set™ feature (professional
eliminates the guesswork
when setting weld parameters.
Use Pro-Set when you want
the speed, convenience and
confidence of pre-set controls.
Simply select the feature and
adjust until Pro-Set appears on
the display. The Pro-Set feature is
available for Balance, Frequency,
Pulse, and DIG parameters.
This programmable feature will
power down the machine if it sits
idle for a specific time.
Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 208-575 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Cooler Power Supply (CPS). An
integrated 120-volt dedicated-use
receptacle to power the Coolmate™ 1.3.
The power switch on the Dynasty also
activates the receptacle to help prevent
starter for non-contact arc initiation.
Provides more consistent arc starts and
greater reliability compared to traditional
HF arc starters. Easy to
set and increases
Digital meters can be calibrated to a
standard device for certification.
Wind Tunnel Technology™ protects internal electrical
components from airborne contaminates, extending the
Fan-On-Demand™ power source cooling system operates
only when needed, reducing noise, energy use and the
amount of contaminates pulled though the machine
Thermal Overload Protection -
Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
DC TIG Features
DC Pulsed TIG standard
Exceptionally smooth and precise arc for welding exotic materials.
DC Stick Features
Tailored arc control (DIG)
arc characteristic to be changed for
specific applications and electrodes.
Smooth running 7018 or stiffer, more
Hot Start™ adaptive control provides
positive arc starts without sticking.
Stick-Stuck detects if the electrode is
stuck to the part and turns the welding
output off to safely and easily remove
the electrode. Menu selectable.
Comes complete with
Maxstar 280 Welder
Quick Reference Guide (English)
Adjustable shoulder strap
8 ft (2.4 m) primary cord
(2) Dinse 50-mm connectors
This is a DC only machine. It cannot TIG weld Aluminum
This item ships Free via standard ground shipping within contiguous U.S.