Home // Specials! // Miller Multimatic 215 With TIG Kit 951674 // Miller Running Gear/Cylinder Rack 301239
Miller Running Gear/Cylinder Rack 301239
Code: 301239
+ CLICK IMAGE TO ENLARGE
Miller Running Gear/Cylinder Rack 301239
Genuine Miller heavy-duty welder cart/cylinder rack has eight inch rubber wheels in back and front casters for easy maneuvering. This running gear is perfect for small Millermatic and Handler MIG welders and Diversion TIG welders.
The gas cylinder rack is designed to hold one gas cylinder no larger than 7 in (178 mm) diameter, maximum weight 65 lb pounds (80 cubic foot capacity is ideal).
Suitable for use with:
This item ships Free via standard ground shipping within contiguous U.S.
12 Questions &
13 Answers
Sophie
from Smithville, TN asked:
July 22, 2017
Will this work for a Dynasty 210?
Miller Running Gear/Cylinder Rack 301239 is only Suitable for use with:
Millermatic 141, 190 and 211
Miller Diversion 165 and 180
Hobart Handler 140, 190 and 210
Hobart E-Z TIG
You would need Miller Small Runner Cart 301318
Customer Service
on July 24, 2017
DANIEL
from linden nj asked:
March 18, 2017
blue box on picture is included?
No, the Miller Running Gear/Cylinder Rack 301239 includes the black cart only.
Customer Service
on March 20, 2017
Chris
from Hopewell va asked:
January 10, 2017
Will the plasma 375 fit on bottom shelf
The Miller Spectrum 375 has dimensions of 9"H X 5 1/2"W X 13 1/4"D therefore, it would fit on the bottom shelf of this running gear. Although, you will want to keep in mind that the storage case will not fit and you will still need room for an air compressor.
Customer Service
on January 17, 2017
Nathan Allbright
from Cozad, NE asked:
March 26, 2016
What's the thinkness of the shelves?
The shelves on the Miller Running Gear/Cylinder Rack 301239 are made from 18 gauge steel (.050).
Customer Service
on March 28, 2016
Nathan
from Cozad, NE asked:
March 19, 2016
What is the dimensions of the consumable holder?
The plastic consumable holder on the Miller Running Gear/Cylinder Rack 301239 measures 8 1/4" x 4 1/4" x 1 3/4".
Customer Service
on March 21, 2016
tom
from chicago asked:
February 16, 2016
Hi- Will a Maxstar 200 and Coolmate 1.3 fit together on this cart?
You can install a Maxstar 200 on the upper shelf of the cart unfortunately there is not enough room to install a Coolmate 1.3 on the bottom
shelf . The correct cart for this installation is the Miller Small Runner Cart 301318.
Customer Service
on February 17, 2016
Ramona
from Washington asked:
November 14, 2015
are there step by step directions for assembly????
The Miller Running Gear/Cylinder Rack 301239 comes complete with assembly instructions
Customer Service
on November 16, 2015
Turbo
from Houston, Texas asked:
September 24, 2015
Will this cart hold a 40 or 60 CF has tank?
Miller Running Gear/Cylinder Rack 301239 will accept a 40 or 60 cu ft cylinder
Customer Service
on September 25, 2015
John
from Alamogordo, NM asked:
August 26, 2015
Will this work for the Miller Multimatic 200
Miller indicates that the Multimatic 200 will fit on the Miller Running Gear/Cylinder Rack 301239 however this running gear rack is not a good choice for the Multimatic. The door on the Multimatic opens down . The design of the 301239's table top will prevent the will prevent the door of the Multimatic from opening properly.
Customer Service
on August 26, 2015
Erich
from Los Angeles asked:
March 6, 2015
Recently purchased a welder from you last week. Want to get this cart now. Do you price match on this item?
Miller has this cart on there website for $149.00 free delivery to local store.
Sorry but we do not price match
Customer Service
on March 6, 2015
Paul Cringan
from Escondido asked:
February 16, 2015
will this rack hold a 125 cf tank?
The Miller Running Gear/Cylinder Rack 301239 has a cylinder capacity of 65 lbs. A 125 cu ft cylinders weighs approx 95 lbs and would not be recommended for use with the 301239 Cylinder Rack
Customer Service
on February 17, 2015
The Miller Running Gear/Cylinder Rack 301239 has a cylinder capacity of 65 lbs. A 125 cu ft cylinders weighs approx 95 lbs and would not be recommended for use with the 301239 Cylinder Rack
Customer Service
on February 17, 2015
Daniel
from Bolingbrook, IL asked:
November 19, 2014
what are the dimensions of the cart?
The dimensions of the Miller Running Gear/Cylinder Rack 301239 are as follows;
Height 34 1/4"
Width 17 1/2 "
Length 31 "
Top Shelf 11 1/2" x 28"
Lower Shelf 11 1/2" x 31"
Customer Service
on November 20, 2014
4.5 Stars based on 20 reviews
By tomt
Cowtown,TX
Heavy duty and rolls smoothly
September 30, 2017
It is very nice to have tank, machine and tools together. I can roll it to my 240 V plug are to any of my 120 V plugs.
Pros It is easy to roll around my shop
By Troy
Arkansas
It holds the welder and bottle
April 15, 2017
It definitely holds my 211 and 80 cf bottle. It is definitely overpriced by at least $30. No assembly instructions just a picture of all the parts suspended in air as if being put together. It's not heavy duty. It is light duty for sure and approaching medium duty.
By Roger
Granite city,Il
Welding cart
April 2, 2017
Very good product I already have one needed a second one
By Glenn
Huntley, Illinois
Solid cart
March 19, 2017
This cart is very easy to assemble. Truly a great fit for welding equipment and accessories.
ProsNice fit and finish
By Terry S.
Chillicothe IL.
Miller Running Gear/Cylinder Rack 301239
March 10, 2017
I had a couple issues with putting the cart together. I did not get the proper nuts for the swivels, had to rethread the nuts.The bolts would not go in for the consumables tray I had to tap the holes. other than that went together fine. I would like it to be a little taller.
By Harry
New York
Great Cart, but the price is wacky high.
January 8, 2017
The cart is great. It comes with all the hardware and goes together easy. It holds the machine and cylinder and still rolls easy. My only gripe is that it's way too expensive for what it is. If I hadn't been in a time crunch, I would have definitely shopped around for a lesser priced cart.
Prosqualtiy
Consprice
By Bill S.
Oak Ridge Tennessee
Must have.
January 7, 2017
Can't do without one.
ProsEasy assembly, well built.
ConsNone
By Tom
Lebanon, TN
Very Happy!
October 22, 2016
Good quality! Very easy to assemble! Fits my Millermatic 211 perfectly. Also very fast shipping.I put a piece of boat carpet I had under the tank to keep it from sliding and keep it from scratching. I also turned the bolts over for the consumable tray so the blue box provided slides in and out easier.
ProsIts heaver built than I was expecting.
ConsNone
By Eric
Sartell, MN
Nice
October 13, 2016
Very easy to assemble, and works great.
By John
Jefferson County, WV
Nice sturdy cart.
September 26, 2016
Works well with the Miller Diversion 180 Tig welder.
ProsEasy assembly, sturdy, good layout for cables.
ConsNone
By rjp
Louisiana
Great Cart
August 25, 2016
This a great cart, heavy duty, large wheels, lots of room and easy to assemble
ProsEasy to move about the shop, not to big, does not take up a lot of space
ConsNone
By Jeff
Virginia
Awesome
August 18, 2016
Best cart you can get.
Sturdy, durable and well crafted
ProsSturdy
Not flimsy and wobbly like others
ConsNone
By Thomas
Sonoma county California
Alright cart
May 5, 2016
Cart is ok for the price. The bottle we use is on the larger side so we modified the cart to handle the weight plus upgraded the casters. But This provided a decent frame to build from.
By Dave
Azle, TX
Works
December 30, 2015
Running gear. Went together easily, and works very well!
By Marion
CollegeStation,Texas
easy to find on internet
December 28, 2015
Hey, I feel like one of Santa's elves!! Should be able to assemble my cart with a photo of the picture in this article that I took with my iphone since my cart came with no instructions.
By Matt
Monte Vista, CO
Works awesome for Tweco 211
December 20, 2015
Great little cart. Well made, lots of hooks. Nice included parts box.
By Robert
Las Vegas
A little work to put together but totally worth it!
October 7, 2015
Very nice cart, convenient, keeping everything in one place. Seems to be very sturdy and made of quality materials
ProsStable and a great place to keep everything in one place.
ConsInstalling the hanging parts tray was a little frustrating.
By Mark M
Woodland Park, CO
Solid, sturdy, but maybe a tad overpriced
May 22, 2015
Not cheap stuff, and you do get what you pay for......but, it seems a little steep for what you get. Nice finish, great packaging, pretty decent instructions, and solid once you get it put together. Sure, you can make one for less $, but what's your time worth? All things considered, a well made product that fits the welder it's designed for.
ProsVery solid, nice finish, fits the Diversion 180 perfectly
ConsIt's not blue
By TIM
HENNESSEY OK
POWER SWITCH
April 30, 2015
THE POWER SWITCH IN THE BACK SITS RIGHT ON THE CROSSBAR SO THE MACHINE CAN NOT SIT BACK IN A STURDY POSITION
NOT A BAD STAND DID BREAK AN E CLIP PUTTING IT TOGETHER
By BurpeevonRotweilerIV
Maryville, TN
AWESOME customer support!
January 30, 2015
Purchased as part of Miller's "Build with Blue" promotion. Came with 3 frame side rails instead of 2 and no rear frame rail. Packed that way in China and Cyberweld had no control over that. However they did more than make it right. Unable to send just the missing part, they promptly had Miller send me another whole cart! Giving 5 stars for customer support.
ProsEasy assembly.
ConsSee review.
back
close menu
Stay Connected