Genuine Miller® protective cover for your Trailblazer® 330, Bobcat™ 265 or Bobcat™ 230 welder.
Miller Bobcat 265 Welder with Battery Charge 907826002
Your Available Rebate
Select Your Free Zone Promo Bonus
Miller® Bobcat™ 265 Engine Driven Welder with Battery Charge/Crank Assist and Remote Start/Stop 907826002
The Miller® Bobcat™ 265 engine driven welder with battery charge/crank assist is a 265 amp DC welder and 11,000 watt AC generator that can also charge and jump start dead batteries, when paired with OPTIONAL #300422 charging cables. Continuous 9,500 watts of auxiliary power are available at all times, even while operating at 100% welding output. Auxiliary power outlets include two 120 volt duplex w/GFCI, one 240 volt receptacle with circuit breaker, and one 120/240 volt receptacle with circuit breaker. Weighing in at just 385 pounds, the Bobcat 265 is 100 pounds lighter and 13% smaller than previous Miller Bobcat models. It is specifically designed to take up less room in your pick up truck or UTV. Miller's exclusive AutoSet™ technology allows you to access pre-programmed welding parameters, based on metal thickness and welding process, for easy set up. You can also fine tune your output amperage and voltage manually, to suit your welding style.
The Bobcat 265 is powered by a twin cylinder Kohler® 23.5 horse power CH730 gasoline engine, and has an 11 gallon fuel capacity. A large LCD screen displays welding output, maintenance intervals. engine hours and fuel level. The Bobcat 265 provides both CC and CV welding output for stick, DC TIG and MIG welding operations. Need to weld aluminum using a Miller Spoolmatic® or Spoolmate™ 200 spool gun The Bobcat 265 features a direct 10-pin receptacle, no need for a WC-24 weld control. This welder comes complete with Miller's True Blue® 3 year warranty.
Structural Steel Work
Use as a Stand-Alone Generator
Use to charge dead batteries or jump start engines
Battery Charge 12/24 volts, 150 amps
Crank Assist 12/24 volts, 300 amps
AutoSet™ technology features preset output volts/amps based on your application.
Use preprogrammed weld parameters or adjust manually to suit your welding style.
Get full auxiliary power with no arc interference, for superior weld quality
Jobsite tools can run without interruption, helping you get more done.
Easily turn your Bobcat welder on and off remotely, so it only runs when you need it.
Helps reduce fuel and maintenance costs.
Get unparalleled welding performance with 7018 and 6010 stick electrodes.
Arcs start easily and create less spatter, delivering more of the productivity you need.
Weighs less than any other engine-driven welder in its class.
It is over 100 pounds lighter and 13% smaller than previous models.
Bobcat 265 is easier to move and takes up less space on trucks.
Clearly shows output, fuel level, engine hours and maintenance intervals.
Plug a Spoolmatic® or Spoolmate™ 200 spoolgun directly into the Bobcat 265 - no adapter needed.
PLUS get an online rebate from Miller® for a FREE Spoolmate™ 200 spool gun ($1,443.00 MSRP) with the purchase of this Miller® Bobcat™ 265 welder. Rebate form must be submitted online HERE within 30 days of original purchase. FREE Spoolmate DOES NOT ship with welder. Rebate MUST be applied for online with Miller®. Expires 12/31/23.
Earn additional rebates when you purchase additional Miller® branded accessories or Hobart® filler metals.
Miller Welding Cable Set - 2/0, 50 ft. lead with electrode holder and 50 ft. ground with clamp.
Genuine Miller® 25 foot battery charge/jumper cables for your Bobcat™ 265 with battery charge/crank assist or Trailblazer® 325 EFI with Exel™ Power and battery charge/crank assist.
Get twelve FREE 1 lb spools of aluminum MIG wire with purchase.
Expires: While supplies last.
Miller® Spoolmate™ 200 MIG Spoolgun is a highly reliable and economical spool gun with excellent feeding of aluminum MIG wire.
Get eighteen FREE 1 lb spools (1 case) of aluminum MIG wire with purchase.
Expires: While supplies last.
Miller® Spoolmatic® 30A with 30 ft. leads, is a 200 amp MIG spoolgun designed for the professional welder.
Miller® Multi-Terrain Running Gear w/Never Flat™ Tires is recommended for all surfaces and applications.
Miller® Protective Cage w/Cable Holders can be used with running gear, gas cylinder mounting assembly, or trailer.
Miller® Off-Road Running Gear with Never Flat tires is recommended for rugged jobsite applications.
Miller Off-Road Running Gear w/Protective Cage & Never Flat™ Tires is recommended for rugged jobsite applications.
Genuine Miller® 301711 is designed specifically for your Miller Bobcat™ 265 or Trailblazer® 330 welder to make MIG welding in the field more convenient.
Genuine Miller® Bobcat™ replacement/spare remote Start/Stop fob decreases cost and helps eliminate noise at the jobsite.