Miller Maxstar 280 DX TIG Welder With CPS 907539

Code: 907539

Skip to product information
1 of 1

Cyberweld Price $8,044.00
Cyberweld Price $8,044.00
Mfg Industrial Price: $9,291.18
(You Save $1,247.18)
Finance Options:
This item qualifies for free standard shipping.

Select Your Free Zone Promo Bonus

-
+
FAST & FREE SHIPPING On All Orders Over $99


Miller® Maxstar® 280 DX TIG Welder With CPS 907539

The Miller® Maxstar® 280 DX TIG Welder with CPS (Cooler Power Supply) provides up to 280 amps of DC TIG arc and Stick arc welding output. At just 50 pounds, the Maxstar 280 DX can weld up to 3/8 inch steel, yet weight hundreds of pounds less than comparable welders in the same welding output class. The Maxstar 280 DX TIG welder provides advanced features for DC TIG or STICK welding applications. The 280 DX adds extended ranges to sequencer and full trigger options, preflow and increases pulser range to 500 PPS.



Processes
  • DC TIG (GTAW)
  • Pulsed TIG (GTAW-P)
  • Stick (SMAW)
  • Air Carbon Arc (CAC-A)

    Applications
    Precision Fabrication
    Petro Chemical
    Aerospace
    Food/Beverage Industry
    Dairy
    Shipboard

    Features
  • Upgradeable and expandable. Front panel memory card data port provides the ability to easily upgrade software and expand product features.
  • Pro-Set™ feature (professional settings) eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse, and DIG parameters.
  • Sleep timer conserves electricity. This programmable feature will power down the machine if it sits idle for a specific time.
  • Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 208-575 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
  • Cooler Power Supply (CPS). An integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure.
  • Blue Lightning™ high-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity
  • Meter calibration. Digital meters can be calibrated to a standard device for certification.
  • Wind Tunnel Technology™ protects internal electrical components from airborne contaminates, extending the product life.
  • Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminates pulled though the machine
  • Thermal Overload Protection - Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
  • Wireless remote compatible - fully compatible with Miller wireless remote control solutions so you can work the way you want

    DC TIG Features
  • Extended ranges to sequencer, full trigger options, and preflow functions.
  • DC Pulsed TIG standard
  • Exceptionally smooth and precise arc for welding exotic materials.

    DC Stick Features
  • Tailored arc control (DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
  • Hot Start™ adaptive control provides positive arc starts without sticking.
  • Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.


    This is a DC only machine. It cannot TIG weld Aluminum



    Comes complete with
  • Maxstar 280 DX Welder
  • Quick Reference Guide (English)
  • Adjustable shoulder strap
  • 8 ft (2.4 m) primary cord
  • (2) Dinse 50-mm connectors
  • FREE Optrel® Panoramaxx CLT Silver auto-darkening welding helmet



    Get a FREE Optrel® Panormaxx CLT Silver auto-darkening welding helmet with the purchase of this Miller® Maxstar® 280 DX DC TIG welder. While supplies last. (No substitutions allowed.)



    The Optrel® Panoramaxx CLT Silver auto-darkening welding hood features Crystal shade 2.0 light state that is unmatched in the world for color and clarity and provides up to 6X the viewing area of a standard 2" X 4" auto-dark welding lens. The key to this revolutionary technology is the size and shape of the ADF, coupled with the unique Panoramaxx shell design, which allows the welding lens to be positioned closer to your face. The Panoramaxx also has advanced features like SHADETRONIC®, which automatically adjusts the shade level based on the brightness of the arc and True Color, which allows for realistic color perception in light or dark states.

    All Panoramaxx welding helmets now come with the revolutionary IsoFit® headgear. It is the only welding headgear in the world that wraps the entire crown of the head with multiple touch points to provide a custom fit like never before. Independent "three dimensional" size, width and height adjustments ensure all day comfort with a secure hold.

    The Panoramaxx CLT has a built-in rechargeable battery that does not need replacing. The battery is charged through arc light or when manual charging is necessary, a micro USB charging port. It comes complete with micro USB cable, helmet bag and Oprel's 2+1 warranty.



    Features
  • PANORAMIC FIELD OF VISION - The Panoramaxx CLT offers a 6 times larger field of vision than standard welding helmets and is still a lightweight at only 21.5 ounces.
  • CRYSTAL LENS TECHNOLOGY 2.0 - Shade 2.0 light state provides the brightest view of your working environment available anywhere. The natural color and clear optics supplied by CLT increases both safety and efficiency in the workplace.
  • SHADETRONIC® - Detection of the arc brightness and fully automated shade level adjustment from 4 to 12. Adjusts automatically to the changing light conditions of the current welding method. A sophisticated SHADETRONIC® sensor continuously measures the light intensity of the welding arc and regulates the glare protection progressively and fully automatically.
  • FADETRONIC - Patented Optrel FadeTronic technology gradually lightens the auto darkening filter after the welding arc is extinguished. The unpleasant afterglow is faded out especially for high amperage applications. Eye fatigue is significantly reduced, enhancing worker safety. FADETRONIC can be adjusted for a custom user experience.
  • TRUE COLOR - A specially developed UV/IR filter allows the realistic color perception typical of Optrel®, bringing color to the welder's world. TRUE COLOR passes more colors of the spectrum through compared to standard "green" spectrum welding lenses.



  • Optrel Re-Charge - With its rechargeable power-pack, changing batteries is no longer necessary. Thanks to the latest solar technology, a rechargeable lithium-polymer battery is recharged either by the welding light or by the ambient light. In addition, the battery can also be charged directly with any USB charger via a micro-USB interface.
  • 5-Point Detection - intelligent sensor control with five sensors. Sophisticated software and clever positioning of four sensors at the corners and one sensor in the upper center ensures the lens is switched on and off perfectly, even in the most difficult lighting conditions or in awkward positions.
  • IsoFit® headgear sets a new standard of wearing comfort. It is the only product worldwide that can be adjusted in width, length and height i.e. three-dimensionally to any head shape, so that the helmet really fits "like a glove."



  • FadeTronic® - gradually lightens lens when switching from dark (welding) to light state to ease eye fatigue.
  • Sensitivity Adjustment - allows operator to change lens switching sensitivity for varying ambient light conditions or outdoor welding in sunlight.
  • Grinding Mode - external grind control allows user to switch between welding mode and shade 2 grinding mode quickly and easily.
  • Delay Function
  • Out-Of Position Welding is possible with Optrel®'s unique shell design, which has no seams or edges where weld spatter can collect.



    Specs





    Comes complete with
  • Micro USB charging cable
  • Helmet bag
  • 1 extra outside cover plate
  • 2+1 warranty

  • Miller Protective Cover - Maxstar/Dynasty 210/280/300 301382

    Miller Protective Cover - Maxstar/Dynasty 210/280/300 301382

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    Regular price
    $106.25
    Lowest Internet Price
    Mfg Industrial Price: $120.00
    $106.25
    You Save $13.75

    Miller Protective Cover #301382 is designed specifically for your Maxstar® or Dynasty® 210, 280 or 300 TIG welder.

    Miller 150 Amp TIG/Stick Contractor Kit with RCCS-14 301311

    Miller 150 Amp TIG/Stick Contractor Kit with RCCS-14 301311

    Regular price
    $1,240.00
    Lowest Internet Price
    Mfg Industrial Price: $1,542.00
    $1,240.00
    You Save $302.00

    Miller® 301311 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 150 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Miller 150 Amp TIG/Stick Contractor Kit with RFCS-14HD 301309

    Miller 150 Amp TIG/Stick Contractor Kit with RFCS-14HD 301309

    4.8
    Rated 4.8 out of 5 stars
    4 Reviews
    Regular price
    $1,346.00
    Lowest Internet Price
    Mfg Industrial Price: $1,670.00
    $1,346.00
    You Save $324.00

    Miller® TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 150 amp, ALL-IN-ONE Air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Miller 200 Amp TIG/Stick Contractor Kit with RCCS-14 301550

    Miller 200 Amp TIG/Stick Contractor Kit with RCCS-14 301550

    Regular price
    $1,405.00
    Lowest Internet Price
    Mfg Industrial Price: $1,755.00
    $1,405.00
    You Save $350.00

    Miller® 301550 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Miller 200 Amp TIG/Stick Contractor Kit with RFCS-14HD 301549

    Miller 200 Amp TIG/Stick Contractor Kit with RFCS-14HD 301549

    Regular price
    $1,509.00
    Lowest Internet Price
    Mfg Industrial Price: $1,880.00
    $1,509.00
    You Save $371.00

    Miller® 301549 TIG/Stick Contractor Kit with RFCS-14HD remote foot control is a 200 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.

    Weldcraft W-280 TIG Torch Pkg. - 280 Amp Water-Cooled 300990

    Weldcraft W-280 TIG Torch Pkg. - 280 Amp Water-Cooled 300990

    Regular price
    $981.55
    Lowest Internet Price
    Mfg Industrial Price: $1,210.52
    $981.55
    You Save $228.97

    Genuine Weldcraft™ W-280 300990 280 amp water-cooled TIG torch starter kit includes everything you need to operate the new Weldcraft Super Cool™ WP-280 with your TIG welder equipped with 50mm international (Dinse) receptacles, with 25 foot leads.

    Miller Small Runner Cart 301615

    Miller Small Runner Cart 301615

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    Regular price
    $941.00
    Lowest Internet Price
    Mfg Industrial Price: $1,117.00
    $941.00
    You Save $176.00

    Genuine Miller® Small Runner Cart is designed to accommodate Maxstar® or Dynasty® 210 and 280 welders and a Coolmate 1.3 cooler.

    Miller Dynasty/Maxstar Memory Card - Automation Expansion 301151

    Miller Dynasty/Maxstar Memory Card - Automation Expansion 301151

    Regular price
    $1,363.00
    Lowest Internet Price
    Mfg Industrial Price: $1,769.00
    $1,363.00
    You Save $406.00

    Genuine Miller Automation Expansion Memory Card for your Dynasty® 210, 280 or Maxstar® 210, 280 series TIG welder.

    Miller Dynasty/Maxstar Memory Card - Modbus Expansion 301152

    Miller Dynasty/Maxstar Memory Card - Modbus Expansion 301152

    Regular price
    $2,165.00
    Lowest Internet Price
    Mfg Industrial Price: $2,831.00
    $2,165.00
    You Save $666.00

    Genuine Miller Modbus® Expansion Memory Card for your Dynasty® 210, 280 or Maxstar® 210, 280 series TIG welder.