Miller XMT 350 MPa Multiprocess Welder 907366

Code: 907366

Skip to product information
1 of 1

Cyberweld Price $8,766.00
Cyberweld Price $8,766.00
Mfg Industrial Price: $10,124.00
(You Save $1,358.00)
Finance Options:
This item qualifies for free standard shipping.

Select Your Free Zone Promo Bonus

FAST & FREE SHIPPING On All Orders Over $99

Miller® XMT® 350 MPa Multiprocess Welder 907366

The Miller® XMT® 350 MPa is a 350 amp multiprocess welder with built-in Pulsed MIG programs for steel, high tensile steels and aluminum. Miller's exclusive SharpArc® give you total control of the arc cone shape, puddle fluidity and bead profile, while in the pulsed MIG welding mode. Auto-Line™ power management automatically detects 208 to 575 volts, single or three-phase input power and adjusts the XMT 350 MPa to optimize performance.

  • MIG (GMAW)/Pulsed MIG (GMAW-P)
  • Stick (SMAW)
  • Flux Cored (FCAW)
  • Air Carbon Arc (CAC-A) Cutting and Gouging

    Manufacturing Industrial
    Truck and Trailer Manufacturing
    Repair Shops
    Rental Fleets

  • XMT® 350 MPa expands the process capability of the XMT® Series, with built-in Pulsed MIG operation. MPa stands for MIG, Pulse, advanced arc control. The advanced arc control provides:
    Improved pulsed MIG welding.
    More control over the puddle and weld bead using SharpArc®.
    More robust and stable arc at very low arc lengths.
    Reduces heat input
    Welds on a wider range of material thicknesses.

  • Sharp Arc® on the XMT® 350 MPa:
    Can handle virtually any welding job, including those hard-to-weld alloys found at power generation plants and shipbuilding facilities.
    A low setting gives a more fluid puddle and a flatter bead appearance.
    A high setting gives a less fluid puddle and a ropier bead appearance.
    Can be adjusted to help customize the arc for the type of shielding gas being used.

  • Auto-Line™ Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.
  • 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.
  • Available with Dinse or Tweco-style output connectors .
  • Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.
  • Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.
  • Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
  • Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle.
  • Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.
  • Process selector switch reduces the number of control setup combinations without reducing any features.
  • Large, dual digital meters are easy to view and presettable to ease setting weld output.
  • Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
  • Wind Tunnel Technology™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
  • LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power +/- 10%.
  • Fan-On-Demand™ Internal power source cooling system that only works when needed, keeping internal components cleaner.
  • Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
  • Lift-Arc™ Simply touch the tungsten to the work piece and the arc is initiated instantly and automatically without the use of high frequency.
  • Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc.

    Comes complete with
  • Dinse cable connectors (2)
  • FREE Miller® T94i™ auto-darkening welding helmet
  • Regular price
    From $19.99
    Lowest Internet Price
    Mfg Industrial Price:
    From $19.99
    You Save $0.00
    Miller D-74 MPa Plus Dual Wire Feeder 951292

    Miller D-74 MPa Plus Dual Wire Feeder 951292

    Regular price
    Lowest Internet Price
    Mfg Industrial Price: $9,399.00
    You Save $1,261.00


    Get a FREE Miller® T94i™ ClearLight™ auto-darkening welding helmet with purchase.

    Expires: While supplies last.

    See more

    Miller® D-74 MPa Plus single wire feeder is optimized for use with Miller Invision™ MPa and XMT™ MPa welders and can perform two different weld procedures without costly change outs.

    Miller Inverter MIGRunner Cart 195445

    Miller Inverter MIGRunner Cart 195445

    Rated 5.0 out of 5 stars
    2 Reviews
    Regular price
    Lowest Internet Price
    Mfg Industrial Price: $1,655.00
    You Save $260.00

    Miller Inverter MIGRunner™ Cart 195445
    For AlumaFeed™ System, Invision™ 352 MPa, and XMT® 304 and 350.