Millermatic 255 MIG Welder w/EZ-Latch Running Gear 951766

5.0
Rated 5.0 out of 5 stars
5 Reviews

Code: 951766

1 2
Millermatic 255 MIG Welder w/EZ-Latch Running Gear 951766

Cyberweld Price $4,480.00
Cyberweld Price $4,480.00
Mfg Industrial Price: $5,663.97
(You Save $1,183.97)
Finance Options:
This item qualifies for free standard shipping.

Your Available Rebate

Select Your Free Zone Promo Bonus

-
+
CA Warning
WARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov
FAST & FREE SHIPPING On All Orders Over $99


Miller® Millermatic® 255 MIG Welder with EZ-Latch™ Single Cylinder Running Gear 951766

The Miller® Millermatic® 255 MIG welder with EZ-Latch™ single cylinder running gear is a complete 350 amp welding package that comes standard with pulsed MIG welding capability. The inverter design means that the Millermatic 255 is less than half the weight of its popular predecessor, the Millermatic 252. Auto-Set™ Elite technology allows you to use preset welding parameters based on metal thickness, shielding gas and welding wire type to achieve optimum welds. You can also set your voltage and wire feed speed manually, for a custom welding arc.

The Millermatic® 255 comes complete with full color seven inch LCD screen with intuitive design and simple controls. In addition to built-in welding programs, the 255 can also store your custom welding programs. It seamlessly switches between welding with standard MIG gun or optional Spoolmatic™ spool gun. The 255 also features direct plug for XR push-pull gun for professional aluminum wire feed capability. This allows you to use 12 inch spools of aluminum MIG wire instead of the more expensive 1 lb rolls used with the spool gun.

EZ-Latch™ running gear with single cylinder cylinder rack gives unmatched portability to the Millermatic 255. For moving around the shop, the 255 attaches to the running gear through a series of four, quick-disconnect latches. For times when your 255 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 255 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit.

NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in three steps and include: cart with front caster wheels, cylinder tray with rear wheels and cylinder post.



Processes
  • MIG (GMAW)
  • Pulsed MIG (GMAW-P)
  • Flux Cored (FCAW)

    Applications
    General fabricators
    Contract welding services
    Plant maintenance shops



    Features:
  • EZ-Latch™ single cylinder running gear provides unmatched portability for the Millermatic® 255. Operators no longer need to lift machine AND running gear when loading or moving. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability. Cylinder rack features bottle forward technology for increased stability when moving along an incline and running gear has built-in storage for accessories.
  • Easy-to-understand interface with 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time. Quick-access backlit Auto-Set and Pulse buttons above the LCD display illuminate when active. Soft-key buttons below the display change function depending on which screen is displayed. Makes setup or change quick, easy and intuitive. Large text for easier readability. Intuitive connection setup images. Full troubleshooting descriptions versus help errors and look up codes.



  • Auto-Set™ Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. Available for MIG and pulsed MIG processes with the ability to fine-tune your settings. Set weld parameters by selecting wire and gas type, wire diameter and material thickness. Program mode allows easy save and recall of favorite weld settings. Deliver more productivity by eliminating the need to manually set the parameters. Deliver consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
  • Pulsed MIG welding delivers higher quality welds for ALL welders. Lower heat input for less distortion on thin materials and better puddle control on out-of-position welds. Less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn't be done in the past. Ideal for MIG welding aluminum and stainless steel.
  • Compatible with push-pull MIG guns. Increases productivity by allowing the use of 12-inch wire spools versus a spool gun's 4-inch spools. Reduces downtime changing wire spools.
  • Auto-Line™ allows for any single-phase input voltage hookup (208-240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.

    Specs





    Comes complete with:
  • Millermatic® 255 MIG welder with 10 ft. (3 m) power cord
  • EZ-Latch™ single cylinder running gear
  • Cylinder chain
  • 15 ft. (4.5 m) 250-amp Miller® MDX™ MIG Gun with AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
  • 10 ft. (3 m) work cable with clamp and 50 mm Dinse-style connector
  • Flow gauge regulator and gas hose for argon or AR/CO2 mix
  • Extra contact tips
  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls
  • Material thickness gauge
  • FREE Miller® Classic ClearLight™ auto-darkening welding hood.




    • PLUS get a $400.00 rebate from Miller® with the purchase of this Millermatic® 255 MIG welder. Rebate form must be submitted online HERE within 30 days of original purchase. Expires 9/30/24.

    Earn additional rebates when you purchase additional Miller® branded accessories or Hobart® filler metals.




    Specs Download
    Download Millermatic 255 Spec Sheet (Requires Adobe Acrobat Reader)
    Miller EZ-Latch Dual Cylinder Rack w/Gun & Cable Rack 301481

    Miller EZ-Latch Dual Cylinder Rack w/Gun & Cable Rack 301481

    $445.00
    Lowest Internet Price
    Mfg Industrial Price: $486.00
    $445.00
    You Save $41.00

    Miller® EZ-Latch™ dual cylinder cylinder rack with elevated gun and cable rack attaches to the EZ-Latch running gear when multiple shielding gases are required.

    Miller MDX-250 MIG Gun - 15 Foot AccuLock MDX 1770038

    Miller MDX-250 MIG Gun - 15 Foot AccuLock MDX 1770038

    $420.55
    Lowest Internet Price
    Mfg Industrial Price: $672.86
    $420.55
    You Save $252.31

    Genuine Miller® .035/.045 MDX-250 15 foot MIG gun features long-life AccuLock™ consumables and is a direct replacement for the Miller M-25 MIG gun.

    Hobart 230V Welder Power Extension Cord 770644

    Hobart 230V Welder Power Extension Cord 770644

    $146.00
    Lowest Internet Price
    Mfg Industrial Price: $186.00
    $146.00
    You Save $40.00

    Genuine Hobart® 230 Volt Welder Power Extension Cord features 25' of 8/3 power cable with lighted NEMA 6.50 male plug and female receptacle at each end.

    Miller MDX-250 Acculock S .035 Consumables Kit 1880278

    Miller MDX-250 Acculock S .035 Consumables Kit 1880278

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    $60.90
    Lowest Internet Price
    Mfg Industrial Price: $67.85
    $60.90
    You Save $6.95

    Genuine Miller® Acculock™ S .035 Consumables Kit for your Miller MDX™-250 MIG gun.

    Miller MDX-250 Acculock S .045 Consumables Kit 1880279

    Miller MDX-250 Acculock S .045 Consumables Kit 1880279

    $60.90
    Lowest Internet Price
    Mfg Industrial Price: $67.85
    $60.90
    You Save $6.95

    Genuine Miller® Acculock™ S .045 Consumables Kit for your Miller MDX™-250 MIG gun.

    Miller AccuLock S .023 MIG Contact Tip T-A023CH

    Miller AccuLock S .023 MIG Contact Tip T-A023CH

    $12.45
    Lowest Internet Price
    Mfg Industrial Price: $19.40
    $12.45
    You Save $6.95

    Package of 10 - Genuine Miller® .023 AccuLock™ S Contact Tips for your Miller MDX-250 or MDX-250 EZ-Select™ MIG welding gun.

    Miller AccuLock S .030 MIG Contact Tip T-A030CH

    Miller AccuLock S .030 MIG Contact Tip T-A030CH

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    $12.45
    Lowest Internet Price
    Mfg Industrial Price: $19.40
    $12.45
    You Save $6.95

    Package of 10 - Genuine Miller® .030 AccuLock™ S Contact Tips for your Miller MDX-250 or MDX-250 EZ-Select™ MIG welding gun.

    Miller AccuLock S .035 MIG Contact Tip T-A035CH

    Miller AccuLock S .035 MIG Contact Tip T-A035CH

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    $12.45
    Lowest Internet Price
    Mfg Industrial Price: $19.40
    $12.45
    You Save $6.95

    Package of 10 - Genuine Miller® .035 AccuLock™ S Contact Tips for your Miller MDX-250 or MDX-250 EZ-Select™ MIG welding gun.

    Miller AccuLock S .045 MIG Contact Tip T-A045CH

    Miller AccuLock S .045 MIG Contact Tip T-A045CH

    5.0
    Rated 5.0 out of 5 stars
    1 Review
    $12.45
    Lowest Internet Price
    Mfg Industrial Price: $19.40
    $12.45
    You Save $6.95

    Package of 10 - Genuine Miller® .045 AccuLock™ S Contact Tips for your Miller MDX-250 or MDX-250 EZ-Select™ MIG welding gun.

    Miller AccuLock S MIG Nozzle N-A5800C

    Miller AccuLock S MIG Nozzle N-A5800C

    $15.30
    Lowest Internet Price
    Mfg Industrial Price: $23.84
    $15.30
    You Save $8.54

    Package of 1 - Genuine Miller® AccuLock™ S MIG nozzle for your Miller MDX-250 or MDX-250 EZ-Select™ MIG welding gun.

    Miller AccuLock S Diffuser D-MA250

    Miller AccuLock S Diffuser D-MA250

    $11.85
    Lowest Internet Price
    Mfg Industrial Price: $18.44
    $11.85
    You Save $6.59

    Package of 1 - Genuine Miller® AccuLock™ S diffuser for your Miller MDX-250 or MDX-250 EZ-Select™ MIG welding gun.

    Miller AccuLock MDX .023/.025 15 ft. MIG Gun Liner LM1A-15

    Miller AccuLock MDX .023/.025 15 ft. MIG Gun Liner LM1A-15

    $31.50
    Lowest Internet Price
    Mfg Industrial Price: $35.10
    $31.50
    You Save $3.60

    Package of 1 - Genuine Miller® AccuLock™ MDX™ .023/.025, 15 foot MIG gun liner for your Miller MDX MIG welding gun.

    From $19.99
    Lowest Internet Price
    Mfg Industrial Price:
    From $19.99
    You Save $0.00
    Miller Drive Roll Kit - .045 VK Groove 2 Roll 079607

    Miller Drive Roll Kit - VK Groove 2 Roll

    $102.45
    Lowest Internet Price
    Mfg Industrial Price: $117.04
    $102.45
    You Save $14.59

    Genuine Miller® VK-Groove 2 roll drive roll kit for your Miller MIG welder or wire feeder that utilizes a two roll wire drive system.

    5.0
    Rated 5.0 out of 5 stars
    Based on 5 reviews
    Total 5 star reviews: 5 Total 4 star reviews: 0 Total 3 star reviews: 0 Total 2 star reviews: 0 Total 1 star reviews: 0
    Write a Review (Opens in a new window)
    5 reviews
    • DW
      David W.
      Verified Buyer
      I recommend this product
      Rated 5 out of 5 stars
      3 months ago
      Solid machine, good company

      The Millermatic 255 is a solid, capable workhorse, My small production shop runs 4 of these, 2 using short circuit mig (C25) and 2 using pulse mig (spray transfer with C10) Everything is great, both processes work very well and these machines run all day every day. I think that the running gear is pretty lame with weird storage and a leaning gas bottle holder which doesn't seem to add any value and takes up more space, so 1 star for the running gear. The machine is awesome though and Cyberweld is easy to deal with. Great experience overall

      Was this helpful?
    • M
      Mark
      Verified Buyer
      I recommend this product
      Rated 5 out of 5 stars
      3 years ago
      Great machine!

      Great machine and easy to use website

      Was this helpful?
    • R
      Raffi
      Verified Buyer
      I recommend this product
      Rated 5 out of 5 stars
      3 years ago
      Millermatic 255

      Great service!!! Ordered on a Sunday had it delivered on Thursday, shipped out fast. Welder is awesome!!! Thanks again!!!

      Was this helpful?
    • G
      George
      Verified Buyer
      I recommend this product
      Rated 5 out of 5 stars
      3 years ago
      Excellent Company and people to deal with

      Excellent Company and people to deal with

      Was this helpful?
    • AP
      Alan P.
      Verified Buyer
      I recommend this product
      Rated 5 out of 5 stars
      4 years ago
      Mig 255

      Very smooth and no spattering while welding. Love the machine.

      Was this helpful?
    Reviews LoadedReviews Added