54 Questions &
55 Answers
john c d
from Ellerslie,MD asked:
November 18, 2021
Can this cylinder be filled with hydrogen?
1 Answer
80 Cubic Foot Inert Gas Cylinder suitable for all inert gases including: Argon(75%)/CO2(25%) and Argon. can not be filled with hydrogen.
Submitted by:
Cyberweld
on December 3, 2021
Most Helpful Answer
Bob
from CT asked:
November 15, 2021
Will Airgas exchange this cylinder? I called my local branch and was told I would need to bring it down for them to see it. Curious if anyone has exchanged this cylinder at airgas? Thanks
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is a standard 80 cu ft inert gas cylinder with a CGA 580 valve and should be able to be filled at any industrial gas supplier that has the equipment to do so.
Submitted by:
Cyberweld
on December 10, 2021
Most Helpful Answer
GNJ
from Manassas,VA asked:
November 15, 2021
Argon(75%)&Co2(25%) = UN 1956
Is Same Right?
Thank you
1 Answer
Yes, Argon(75%)&Co2(25%) = UN 1956
Submitted by:
Cyberweld
on January 5, 2022
Most Helpful Answer
Harold M
from Duson, La. asked:
June 9, 2021
Can this cylinder be used for oxygen?
1 Answer
Inert Gas Cylinder - 80 Cubic Foot can not be used for oxygen.
Submitted by:
Cyberweld
on June 10, 2021
Most Helpful Answer
Monty J
from Arkansas asked:
June 3, 2021
How tall is this bottle?
1 Answer
Inert Gas Cylinder - 80 Cubic Foot
Cylinder dimensions: 7.0"OD X 32.5"H
Submitted by:
Cyberweld
on June 3, 2021
Most Helpful Answer
Randal k
from Burleson, tx asked:
February 2, 2021
Where can I do exchanges and can it just be refilled.
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is a standard 80 cu ft inert gas cylinder with a CGA 580 valve and should be able to be filled at any industrial gas supplier that has the equipment to do so. You should check with your supplier to see if they have any regulations which would prevent them from filling this cylinder.
Submitted by:
Cyberweld
on February 5, 2021
Most Helpful Answer
Matthew Maravilla
from WA asked:
January 17, 2021
How tall are tanks ?
1 Answer
Inert Gas Cylinder - 80 Cubic FootCylinder dimensions: 7.0"OD X 32.5"H
Submitted by:
Cyberweld
on January 19, 2021
Most Helpful Answer
Walter
from NJ asked:
October 28, 2020
Can this bottle be used for mix gas for welding
1 Answer
80 Cubic Foot Inert Gas Cylinder suitable for all inert gases including: Argon(75%)/CO2(25%) and Argon.
Submitted by:
Cyberweld
on October 30, 2020
Most Helpful Answer
Shane
from Chatsworth GA asked:
September 15, 2020
Are these shipped full??
1 Answer
Inert Gas Cylinder - 80 Cubic Foot can be shipped full or empty. Use the drop down box to choose.
Submitted by:
Cyberweld
on September 15, 2020
Most Helpful Answer
Fischer
from California asked:
May 18, 2020
What's the pressure range when ordered with "full" option?
1 Answer
Inert Gas Cylinder - 80 Cubic Foot would come with a pressure of 1800 psi when ordered full.
Submitted by:
Cyberweld
on May 19, 2020
Most Helpful Answer
Paul J. C
from TN asked:
May 4, 2020
Do the filled cylinders come with a safety cap?
1 Answer
Inert Gas Cylinder - 80 Cubic Foot does have a cylinder cap.
Submitted by:
Cyberweld
on May 4, 2020
Most Helpful Answer
Dave
from New Jersey asked:
March 17, 2019
I am in New Jersey. Will this tank be NJ DOT certified? So I can refill it? Thanks! Dave
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is DOT certified.
Submitted by:
Cyberweld
on March 19, 2019
Most Helpful Answer
Michael
from West Hollywood, CA asked:
January 14, 2019
Is there an expiration date for the nitrogen gas?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot does not have a shelf life, but will require to be retested in 10 years.
Submitted by:
Cyberweld
on January 15, 2019
Most Helpful Answer
Darren
from Nicholasville, KY asked:
March 20, 2018
Can this tank be filled with 100% CO2? If so, do I need a different regulator or different valve stem? I have a standard CO2 regulator and this cylinder appears to have a Aragon mixed gas type valve stem.
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot can not be filled with 100% Co2
Submitted by:
Cyberweld
on March 22, 2018
Most Helpful Answer
Mark
from Wimberley, Texas asked:
March 9, 2017
How long would it take to get this in Wimberley, Tx?
1 Answer
The expected delivery time would be about 5 business days.
Submitted by:
Customer Service
on March 10, 2017
Most Helpful Answer
Mike
from new hampshire asked:
December 8, 2016
where is the tank made. my dealer said there having trouble with some of the ones made in china and wont exchange some of them. what info do i need to know about this tank to make sure they will exchange it.
1 Answer
The The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot and all our cylinders are brand new and will not require retesting for 10 years. They are DOT approved and have the required DOT # stamped into them. We have sold hundreds of these cylinders over the years. In most cases there is no problem in having them filled even though they are made in China. Occasionally there will be a gas distributor who will refuse to fill the cylinder. We cannot guarantee that your local gas distributor will fill the cylinder. If you purchase the cylinder from us empty and you cannot get it filled you can return it. However you will be responsible for the cost to return it.
Submitted by:
Customer Service
on December 12, 2016
Most Helpful Answer
Don
from hastings nebraska asked:
September 6, 2016
what color are they for argon?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is currently sold in a black color.
Submitted by:
Customer Service
on September 7, 2016
Most Helpful Answer
Kevin
from Phoenix asked:
August 10, 2016
How much does this bottle weigh?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot weighs 52 lbs empty and 63 lbs full.
Submitted by:
Customer Service
on August 11, 2016
Most Helpful Answer
Pam Osorio
from calif. asked:
July 30, 2016
Where do you fill it with helium? How much does it hold?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot will hold 80 cu ft of helium.. To fill it you should take it to an industrial gas supplier
Submitted by:
Customer Service
on August 1, 2016
Most Helpful Answer
Joseph
from Albany, New York asked:
July 23, 2016
If I purchase it filled, is it 100% pure nitrogen?!? Thanks!
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot will be filled with Nitrogen that is 99.8% pure
Submitted by:
Customer Service
on July 26, 2016
Most Helpful Answer
ALEX
from California asked:
July 17, 2016
What is the current cylinder color availability,I would like a black cylinder if possible.
1 Answer
Our current inventory of Cyl Tec Inert Gas Cylinder - 80 Cubic Foot are painted green
Submitted by:
Customer Service
on July 18, 2016
Most Helpful Answer
Al Be
from Central CA asked:
June 9, 2016
Does the tank have the standard Department of Transportation (DOT) markings?
1 Answer
The Cyl Tec Inert Gas Cylinders - 80 Cubic Foot have the DOT marking stamped into them
Submitted by:
Customer Service
on June 10, 2016
Most Helpful Answer
John Stanley
from Illinois asked:
April 5, 2016
What pressure is the tank rated for?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot are rated 2015PSI plus 10% overfill
Submitted by:
Customer Service
on April 6, 2016
Most Helpful Answer
Tim
from Grand Rapids mi asked:
March 11, 2016
Will this tank work with a Lincoln 140c regulator
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot will work with the regulator supplied with the Lincoln 140C
Submitted by:
Customer Service
on March 14, 2016
Most Helpful Answer
Ryan
from Manchester, Tennessee asked:
February 23, 2016
If you order the tank empty do you still have to sign for it when it is delivered.
1 Answer
If you order an empty Cyl Tec Inert Gas Cylinder - 80 Cubic Foot you do not have to sign for it when delivered
Submitted by:
Customer Service
on February 23, 2016
Most Helpful Answer
Dave
from Rives Junction MI. asked:
January 26, 2016
Are these still painted black and do they come with a new valve up top. Regards, Dave
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot are currently painted black and they have a threaded cylinder cap and a brand new valve.
Submitted by:
Customer Service
on January 26, 2016
Most Helpful Answer
Darvis
from Ruston, La asked:
October 31, 2015
The valves are threaded not welded? I saw one of the reviews and it said that they had got their tank it had a weld on valve.
Thanks
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot and all cylinders that we sell have thread in valves.
Submitted by:
Customer Service
on November 2, 2015
Most Helpful Answer
Greg R
from schaumburg illinois asked:
October 27, 2015
I'm wondering about the size and weld time how much time do you get on this tank versus a 55 cubic tank thnxs
1 Answer
There is really no way to determine gas consumption with out performing a survey of variables like welding arc time and gas flow rate in your welding process . For example if you have your flow regulator set at 20 cubic ft per hour and were to weld continually for 4 hours straight you would empty the Cyl Tec Inert Gas Cylinder - 80 Cubic Foot in 4 hours. With the same set up you would empty a 55 cubic ft cylinder in 2 hours and 45 minutes. This example is totally unrealistic since no one welds continually without stopping for these lengths of time. However if does indicate what the worst case consumption would be.
Submitted by:
Customer Service
on October 28, 2015
Most Helpful Answer
Turbo
from Houston TX asked:
October 5, 2015
Before buying, how do I know my local Airgas location will be able to refill the bottle?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is a standard 80 cu ft inert gas cylinder with a CGA 580 valve and should be able to be filled at any industrial gas supplier that has the equipment to do so. You should check with your Airgas supplier to see if they have any regulations which would prevent them from filling this cylinder.
Submitted by:
Customer Service
on October 5, 2015
Most Helpful Answer
Marcos
from Tx asked:
February 16, 2015
Where I can refilled when get empty?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is considered a customer owned cylinder and should be able to be refilled at any industrial gas supplier that sells or fills oxygen cylinders
Submitted by:
Customer Service
on February 17, 2015
Most Helpful Answer
Joe
from Louisville, KY asked:
January 13, 2015
Do these tanks have a distributors name on the neck ring? If so do they come with a bill of sale or other certificate of title? My local supplier won't fill cylinders from other distributors without the above paperwork.
2 Answers
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot and all of the cylinder sizes we offer on our site are considered Customer Owned Cylinder sizes. The Neck rings are blank and do not have our name on them.If you purchase a cylinder from us that is filled with gas it will have our label on it which has our name and the type of gas that is in the cylinder. When you purchase a cylinder you will receive a receipt/packing slip. This slip will act as proof of sale and certificate of ownership.
Submitted by:
Customer Service
on January 14, 2015
Most Helpful Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot and all of the cylinder sizes we offer on our site are considered Customer Owned Cylinder sizes. The Neck rings are blank and do not have our name on them.If you purchase a cylinder from us that is filled with gas it will have our label on it which has our name and the type of gas that is in the cylinder. When you purchase a cylinder you will receive a receipt/packing slip. This slip will act as proof of sale and certificate of ownership.
Submitted by:
Customer Service
on January 14, 2015
Most Helpful Answer
Tim
from Canada asked:
December 28, 2014
Does the cylinder come with a TC certification stamp as well. In Canada we require a TC stamp to make them approved.
1 Answer
We do not ship the Cyl Tec Inert Gas Cylinder - 80 Cubic Foot to Canada thus our cylinders are not required to have the TC stamp
Submitted by:
Customer Service
on January 5, 2015
Most Helpful Answer
Paul
from Pearce, AZ asked:
November 22, 2014
Does the cga 580 valve on this cylinder match the regulator that comes with the Hobart 140 handler?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is compatible with the regulator supplied with the Hobart Handler 140
Submitted by:
Customer Service
on November 25, 2014
Most Helpful Answer
Ron
from Nashville,Tn asked:
August 28, 2014
where would you get it refilled and keep the same tank ?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot can usually be exchanged at your nearest gas distributor.
Submitted by:
Customer Service
on August 29, 2014
Most Helpful Answer
Larry Ashworth
from Rockville MD asked:
June 3, 2014
Is this an empty cylinder when purchased and delivered ?.
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot can be ordered either empty or full.. If you are on our site you will see directly below the cylinder price a box that says options., If you click on the arrow you will see the options for filling the cylinder
Submitted by:
Customer Service
on June 3, 2014
Most Helpful Answer
Lyndon
from Hayward, California asked:
April 28, 2014
Do i need to pay hazardous material handling fee?
1 Answer
You do not have to pay hazmat charges when purchasing the Cyl Tec Inert Gas Cylinder - 80 Cubic Foot
Submitted by:
Customer Service
on April 28, 2014
Most Helpful Answer
Dieter j patsch
from california asked:
April 26, 2014
will you ship this cylinder full of 25 -75 % for mig welding if so how much ?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot can be shipped filled with 75/25 argon/ co2 gas.. The cost for this item is $246.10. Shipping is free
Submitted by:
Customer Service
on April 28, 2014
Most Helpful Answer
alex kailian
from Pennsylvania asked:
March 23, 2014
how tall is this botle in inches
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot measures approx. 37 inches to the top of the cylinder cap
Submitted by:
Customer Service
on March 24, 2014
Most Helpful Answer
Al
from Southeast, Nebraska asked:
February 23, 2014
Are these tanks certified and ready to be filled?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot are brand new cylinders and are US DOT certified and ready to be filled
Submitted by:
Customer Service
on February 25, 2014
Most Helpful Answer
Dream
from Elizabeth, N.J. asked:
September 22, 2013
PS: Can it also be filled with just oxygen vs. nitrogen?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot can only be filled with inert gas. It will not accept oxygen.
Submitted by:
Customer Service
on September 23, 2013
Most Helpful Answer
Cliff
from East Peoria, IL asked:
June 26, 2013
Will the 80 cu ft cylinder fit on the small cart (#194776) with a Miller 211?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot will fit on a Millermatic 211 with cart.
Submitted by:
Customer Service
on June 28, 2013
Most Helpful Answer
john grant
from Mission, Texas asked:
June 11, 2013
how heavy will this tank be when its completely full of argon gas?
1 Answer
A full Cyl Tec Inert Gas Cylinder - 80 Cubic Foot weighs approx. 62.0 lbs
Submitted by:
Customer Service
on June 12, 2013
Most Helpful Answer
charles peltz
from Billings, Mo asked:
June 4, 2013
Should Teflon tape be used on threads of regulator when installing on tank?
1 Answer
You should not have to use Teflon tape on the regulator to valve connection on the Cyl Tec Inert Gas Cylinder - 80 Cubic Foot.. The Brass to Brass connection should seal properly
Submitted by:
Customer Service
on June 10, 2013
Most Helpful Answer
Samira
from London asked:
June 4, 2013
Can this cylinder be used with helium? What are the cylinder's dimension and weight?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot can be filled with helium.. The cylinder measures 37.5" tall and is 7" in diameter
Submitted by:
Customer Service
on June 14, 2013
Most Helpful Answer
Jose
from Raleigh, NC asked:
June 3, 2013
can I get this filled with 98/2 Ar/CO2 ?
1 Answer
The Cyl Tec Inert Gas Cylinder - 80 Cubic Foot could be filled with the 98/2 mix you are inquiring about..We however do not offer this mix
Submitted by:
Customer Service
on June 14, 2013
Most Helpful Answer
John
from Portland OR asked:
May 8, 2013
Can you fill & ship Helium in this particular tank?
1 Answer
Sorry, we can not fill and ship Cyl Tec Inert Gas Cylinder - 80 Cubic Foot with helium.
Submitted by:
Customer Service
on May 10, 2013
Most Helpful Answer
John
from Beaverton, OR asked:
May 8, 2013
Can you fill a New 80 CF with Helium instead of Argon, or Nitrogen? And then Ship it to Oregon?
1 Answer
Sorry, we can not fill and ship Cyl Tec Inert Gas Cylinder - 80 Cubic Foot with helium.
Submitted by:
Customer Service
on May 10, 2013
Most Helpful Answer
Robert
from Pittsburgh asked:
May 6, 2013
What is the fill pressure of the full argon 80cf cylinders you ship?
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot is shipped full of argon at 2200 psi.
Submitted by:
Customer Service
on May 7, 2013
Most Helpful Answer
jose torrez
from mcallen tx 78501 asked:
April 16, 2013
will I have any problems getting this bottle full at aoc or any other local gas supplyier.
1 Answer
You should not have any problem getting the Cyl Tec Inert Gas Cylinder - 80 Cubic Foot filled.. Most welding gas suppliers consider the smaller cylinders such as an 80 cu ft as a Customer Owned Cylinder and they will fill it as long as the cylinder has a good date code..
Submitted by:
Customer Service
on April 19, 2013
Most Helpful Answer
George reeves
from Houston Tx. asked:
April 11, 2013
Pressure ratting.
1 Answer
Cyl Tec Inert Gas Cylinder - 80 Cubic Foot has a pressure rating of 2015 psi.
Submitted by:
Customer Service
on April 15, 2013
Most Helpful Answer
