41 Questions &
42 Answers
Scott L
from Mosinee, Wisconsin asked:
September 17, 2022
Which aluminum spool gun can be used with Miler Pipe Pro 400?
1 Answer
Miller Spoolmatic 30A Spoolgun 130831 will work with the Pipe Pro 400. Miller WC-24 Weld Control 137549 is also required.
Submitted by:
Cyberweld
on September 29, 2022
Most Helpful Answer
Masyn
from Michigan asked:
January 26, 2022
Is this a direct fit for millermatic 255
1 Answer
The Miller® Spoolmatic® 30A is a direct connect for the Millermatic 255.
Submitted by:
Cyberweld
on March 22, 2022
Most Helpful Answer
Road Dog
from Tulsa, Ok asked:
July 6, 2020
Will this connect to a air pak 200 and if so what do I need to connect it?
2 Answers
Miller Spoolmatic 30A Spoolgun is is a direct connect to the AirPak 200
Submitted by:
Cyberweld
on July 9, 2020
Most Helpful Answer
Miller Spoolmatic 30A Spoolgun is a direct connect to the Air Pak 200
Submitted by:
Cyberweld
on July 9, 2020
Most Helpful Answer
Ben
from Carlisle, PA asked:
March 20, 2020
Will this work with a Multimatic 255?
1 Answer
Miller Spoolmatic® 30A Spoolgun will work with the Millermatic 255
Submitted by:
Cyberweld
on March 23, 2020
Most Helpful Answer
andre
from Hollywood Florida asked:
March 2, 2020
Will this work with miller delta weld 302
1 Answer
Miller Spoolmatic® 30A 130831 will work on the Deltaweld 302 with the addition of Miller WC-24 Weld Control 137549
Submitted by:
Cyberweld
on March 4, 2020
Most Helpful Answer
Scot
from Tucson, AZ asked:
January 7, 2020
Is there any Miller Spool Gun that will connect to the CST 280 series units?
1 Answer
Miller Spoolmatic® 30A Spoolgun will not attach to ant CST 280 model machines.
Submitted by:
Cyberweld
on January 9, 2020
Most Helpful Answer
ICHOR
from CHINO, CA asked:
December 6, 2019
WILL THIS WORK WITH A MILLER MM251?
1 Answer
Miller Spoolmatic® 30A Spoolgun is a direct connect to a Millermatic 251.
Submitted by:
Cyberweld
on December 6, 2019
Most Helpful Answer
Leon
from Texas asked:
December 4, 2019
Will this gun work with a Miller Invision 352 MPa?
1 Answer
Miller Spoolmatic® 30A Spoolgun will not work with the Invision 352mpa. To feed aluminum with the mpa you would need to use a Miller push pull gun XR-Aluma-Pro™ Plus Gun or XR™-Pistol Plus Gun along with a feeder.
Submitted by:
Cyberweld
on December 6, 2019
Most Helpful Answer
Cole
from Maui, Hawaii asked:
November 7, 2019
Does this connect directly to the XMT
1 Answer
Miller Spoolmatic® 30A Spoolgun will connect to the XMT with the addition of
Miller WC-24 Weld Control 137549
Submitted by:
Cyberweld
on November 11, 2019
Most Helpful Answer
Brian
from Kansas city asked:
July 17, 2019
Will this fit a millermatic 211?
1 Answer
The Spoolmatic 30A will not work with the Millermatic 211. You would have to use Miller Spoolmate 150 Spoolgun 301272 or Miller Spoolmate 300371.
Submitted by:
Cyberweld
on July 18, 2019
Most Helpful Answer
John
from Boston, Ma. asked:
July 15, 2019
Will this gun work with a Lincoln 255c ?
1 Answer
Miller advises that to hook the 30A spoolgun to the Lincoln 255c you would also need WC-115A control (#137546) and it would not be a direct connect. You would need to do some electrical wiring between the WC-115A and the 255c.
Submitted by:
Cyberweld
on July 18, 2019
Most Helpful Answer
Louie P
from NV asked:
April 12, 2019
Can i run this gun off of my Lincoln SA 200
1 Answer
Miller advises the Miller Spoolmatic® 30A Spoolgun 130831 will work with the Lincoln SA200, in addition you would need Miller WC115A Weld Control with Contactor 137546011
Submitted by:
Cyberweld
on April 17, 2019
Most Helpful Answer
Bob
from Texas asked:
July 30, 2018
What is the smallest machine this will work with
1 Answer
The smallest machine that a Miller Spoolmatic 30A Spoolgun 130831 will work with is a Millermatic 212 MIG Welder Auto-Set 907405
Submitted by:
Cyberweld
on August 3, 2018
Most Helpful Answer
Danny C
from Millport Al asked:
July 21, 2018
Will this hook to a millermatic185 and what would it require to install it? What serial number range would it fit on?
1 Answer
The recommended spoolgun for the Millermatic® 185 is Miller Spoolmate 3035 MIG Spoolgun 195016. Depending on the serial number of the machine you will also need:
Prior to KH376829
Retrofit Kit #186871 &
Kit #207642
Effective with KH376829 and above Kit #207642
Submitted by:
Customer Service
on July 23, 2018
Most Helpful Answer
Richard
from Westfield, Indiana asked:
July 9, 2017
Where is the serial number printed on the 30a ? How long is the barrel that comes standard with the 30a?
1 Answer
Miller advises that the serial number would be either on the handle of the gun or under the drive roll flap. The standard barrel is 6 inches.
Submitted by:
Customer Service
on July 19, 2017
Most Helpful Answer
Corey
from Vanceburg Kentucky asked:
July 2, 2017
What do I need to hook this up to my bobcat 250
1 Answer
Richard
from Rienzi ms asked:
June 21, 2017
Will this work with the millermatic 252?
1 Answer
Yes, you can install the Spoolmatic 30A on a Millermatic 252.
Submitted by:
Customer Service
on June 21, 2017
Most Helpful Answer
Bryan
from Rockvale Tn asked:
June 3, 2017
Will I have to order a special adapter to hook this up to my big blue 500! I have a 14 pin plug!
1 Answer
In order to hook the Miller Spoolmatic 30A Spoolgun 130831 to a Big Blue, you would also need Miller WC-24 Weld Control 137549.
Submitted by:
Customer Service
on June 9, 2017
Most Helpful Answer
Joseph Blalock
from raleigh nc asked:
September 30, 2016
will this gun work with a millermatic 210?
1 Answer
You can install a Miller Spoolmatic 30A Spoolgun 130831 on a Millermatic 210. In addition to the 30A you will need a Miller # 195287 cable adapter
Submitted by:
Customer Service
on October 3, 2016
Most Helpful Answer
john chuba
from fort wayne ind asked:
January 21, 2016
where do you hook the positive induction cable if you have a xmt 350 cc/cv miller
1 Answer
The power cable for the Miller Spoolmatic 30A Spoolgun 130831 will connect to the positive terminal on the XMT. The XMT has a 50mm female Dinse receptacle. The 30A has a bolt on lug connection. You will have to cut the lug connector off and install a Miller Dinse (International) Weld Cable Connector - Male 129527
Submitted by:
Customer Service
on January 21, 2016
Most Helpful Answer
joe
from arizona asked:
October 22, 2015
will this gun work on my miller matic 250
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will work on your Millermatic 250
Submitted by:
Customer Service
on October 22, 2015
Most Helpful Answer
John
from florida asked:
July 8, 2015
will this product work with a miller XMT 350 CC/CV?
1 Answer
You can install a Miller Spoolmatic 30A Spoolgun 130831 on a XMT 350 cc/cv. To complete the installation you will also need to purcahse a Miller WC-24 Weld Control 137549.
Submitted by:
Customer Service
on July 8, 2015
Most Helpful Answer
John
from WV asked:
February 21, 2015
can I connect the spoolmate 30A directly to my 12vs extreme wire feeder or do I need the wc-24?
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 cannot be used at all with the Miller 12VS feeder
Submitted by:
Customer Service
on February 23, 2015
Most Helpful Answer
matt
from Texas asked:
May 23, 2014
will this product work with a miller XMT 304 CC/CV?
1 Answer
You can install the Miller Spoolmatic 30A Spoolgun 130831 on your XMT 304 cc/cv.. You will also need the Miller WC-24 Weld Control 137549 to complete the installation
Submitted by:
Customer Service
on May 27, 2014
Most Helpful Answer
David Pantano
from United States asked:
April 30, 2014
Can I use this spoolmatic on my Lincoln power mig 350? If so what adapter(s) will I need?
1 Answer
Miller advises that you can run a Miller Spoolmatic 30A Spoolgun 130831 off of your Lincoln PowerMig 350.. It will require Miller WC-115 # 137546 Weld control($785.00). This not a simple plug and go connection. It will require some wiring modification in order to make it operate . We suggest that you call us before ordering this item 800-246-9353
Submitted by:
Customer Service
on May 1, 2014
Most Helpful Answer
Bruce
from Provost, Alberta asked:
March 31, 2014
Will this spool gun work on my Millermatic 250?
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will work on your Millermatic 250 and should be a direct connection.. If you have a Millermatic 250 Vintage you will need a Miller10-Pin Module #043084 in order to make the hook up
Submitted by:
Customer Service
on March 31, 2014
Most Helpful Answer
KM
from MN asked:
March 10, 2014
Does this come with the cable cover ? Some pictures show it some do not .
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 does not come with a cable cover
Submitted by:
Customer Service
on March 11, 2014
Most Helpful Answer
Benny moffitt
from Ripley mississippi asked:
February 11, 2014
will this gun fit a 251 miller mig welder
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 can be used with a Millermatic 251
Submitted by:
Customer Service
on February 11, 2014
Most Helpful Answer
connie
from gary asked:
January 4, 2014
does it have a warranty
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 is warrantied for 1 year parts and labor
Submitted by:
Customer Service
on January 7, 2014
Most Helpful Answer
Dave DeBaene
from Moline,illinois asked:
December 16, 2013
Will a Spoolmatic 15A or 30A connect directly to a 450 Maxtron?
1 Answer
In order to install a Miller Spoolmatic 30A or 15A Spoolgun on a Miller Maxtron 450 you will also need a Miller WC -24 weld control.. You would plug the WC-24 into the 14 pin connector on the front of the machine..
Submitted by:
Customer Service
on December 17, 2013
Most Helpful Answer
james
from vidor asked:
November 24, 2013
If i have the suite case extreme 8vswill this spoolgun hook up to it, or do I still have to get wc24 control
1 Answer
You cannot run the Miller Spoolmatic 30A Spoolgun 130831 off of an 8VS feeder even if you purchase the WC24 control.. The 8VS cannot support the operation of a spoolgun
Submitted by:
Customer Service
on November 25, 2013
Most Helpful Answer
mike
from nc asked:
August 11, 2013
what welders is this gun compatible with
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 is compatable with : Millermatic 212,Shopmate 300DX,Bobcat models ( must orderWC115a with contactor control box )Millermatic 252, Millermatic 350p,The following machines will require the addition of the WC 24 control:Aluma power MPA, CP 302,All Dimension series ,All XMT except VS,Trailblazer, Big Blue300 pro, Big Blue 350 Pipe Pro
Submitted by:
Customer Service
on August 12, 2013
Most Helpful Answer
Scott Everson
from Peculiar, MO asked:
July 18, 2013
Will this gun work with a Miller 251?? What spool guns will work with a 251?
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will work on the Millermatic 251
Submitted by:
Customer Service
on July 19, 2013
Most Helpful Answer
doug s
from franklin, in asked:
July 7, 2013
will this gun fit a miller syncrowave 250
1 Answer
Miller Spoolmatic 30A Spoolgun 130831 will not work on a Syncrowave. The Syncrowave is a CC tig machine. The Miller Spoolmatic 30A Spoolgun 130831 would need to run off of a CV power source.
Submitted by:
Customer Service
on July 8, 2013
Most Helpful Answer
Mike Horton
from CDA, Idaho asked:
March 30, 2013
will this hook up to my XMT304, #903471
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will hook up to up to your XMT 304 however you will need to add a Miller137549 WC 24 weld control. $274.00
Submitted by:
Customer Service
on April 2, 2013
Most Helpful Answer
Matt
from new bern nc asked:
March 13, 2013
Does it require a plastic tube in side barrel. Gun is jamming
2 Answers
Here is a link for an owners manual for the Miller Spoolmatic 30A mig gun. It contains a parts breadown.
http://www.millerwelds.com/om/o1213ag_mil.pdf
Submitted by:
Customer Service
on March 15, 2013
Most Helpful Answer
Here is a link for an owners manual for the Miller Spoolmatic 30A mig gun. It contains a parts breadown.
http://www.millerwelds.com/om/o1213ag_mil.pdf
Submitted by:
Customer Service
on March 15, 2013
Most Helpful Answer
steve faulkner
from pa asked:
February 6, 2013
will this spool gun work on my 302 trailblazer
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will work on your Trailblazer 302 however you will also need to purchase a WC 24 weld control part # 137549 to comlete the hook up
Submitted by:
Customer Service
on February 12, 2013
Most Helpful Answer
Randy
from washington asked:
January 14, 2013
will this gun fit my 255c licoln
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will not fit on Lincoln machines.
Submitted by:
Customer Service
on January 15, 2013
Most Helpful Answer
cory
from eau claire wi asked:
November 14, 2012
will this hook right to a 250x without a control cord
1 Answer
The Miller Spoolmatic 30A Spoolgun 130831 will plug directly into the Millermatic 250x
Submitted by:
Customer Service
on November 15, 2012
Most Helpful Answer
jimbob
from new orleans asked:
October 14, 2012
what control box is needed for miller bobcat 225nt
jay scopel
from burgettstown,PA asked:
August 5, 2012
Can this gun be used on a miller 300 pro?
1 Answer
To be sure if the Miller Spoolmatic 30A Spoolgun 130831 would connect to a Miller 300 pro we would need to check it against the serial number.
Submitted by:
Customer Service
on August 8, 2012
Most Helpful Answer
