Home  //  Plasma Cutters  //  Thermal Dynamics Cutmaster 58 Plasma Cutter w/50 ft Torch 1-5831-1  //  Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387

Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387

Code: 9-9387
Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387
Cyberweld Price: $215.25
Mfg Industrial Price: $246.00
(You Save:  $30.75)
QTY:
FAST & FREE SHIPPING
Availability: Usually ships the next business day



Thermal Dynamics® Plasma 2 Stage Air Filter Kit 9-9387

Genuine Thermal Dynamics® Two Stage Air Filter will remove moisture and contaminants from the air stream when using compressed air. The filter is capable of filtering to at least 5 microns. The filter assembly is pre-assembled at the factory and need only be installed on the plasma cutter.

This item ships Free via standard ground shipping within contiguous U.S.

5 Questions & 6 Answers
L
from Pa asked:
July 11, 2019
What size screw and thread is used to mount this on the back of the thermal dynamics cutmaster 52? Is that the size that fits in all of the predrilled holes in the back of the plasma cutter.
1 Answer
Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 would screw into 1/4 female pipe thread on the back of the Cutmaster 52.
Submitted by: Cyberweld on July 16, 2019

Kraig L
from Ohio asked:
June 18, 2019
my unit seems to be leaking air out of the bottom port is this normal?



2 Answers
Miller Coolmate™ 1.3 Coolant System 300972 will work with your early model Dynasty.
Submitted by: CYBERWLED on June 21, 2019
Thermal Dynamics advises it is not normal for the Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 to leak air out of the bottom.  It probably has debris stuck in it or has too much pressure going to it.
Submitted by: Cyberweld on June 21, 2019

Michael M
from TEXAS asked:
December 15, 2018
Can purchase the filter element replacements if you already have the filter kit?
1 Answer
The filter cartridges in the Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 are not cleanable but they are replaceable.. The part #s for the replacement cartridges are 9-1021 and 9-1022.These would be special order. We can be reached at 888-328-9890 for pricing and availability.
Submitted by: Cyberweld on December 19, 2018

Mike
from Wisconsin asked:
June 24, 2015
What comes with this kit?
1 Answer
The Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 comes with the 2 Stage Filter assembly plus a mounting bracket, mounting screws, airline tubing, elbow fittings and instructions.
Submitted by: Customer Service on June 24, 2015

Rick
from Nebraska asked:
December 6, 2014
Is the particulate part of the filter cleanable? Also, is the water seperator serviceable/drainable in some way? Thanks.
1 Answer
The filter cartridges in the Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 are not cleanable but they are replaceable.. The part #s for the replacement cartridges are 9-1021 and 9-1022..The Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 is self venting/ draining. It there are no provisions for manual draining
Submitted by: Customer Service on December 8, 2014


4.8
4 Reviews
5
75% (3)
4
25% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (4 of 4 responses)
By Randy
Washington
February 10, 2018
Compact filter, dries the air
I haven't done extensive dryness checking but it seems to work well. It does vent air at the bottom and I think it sounds like more than it is. Small, compact unit that seems to work as advertised.
ProsCompact unit.
ConsThe unit came with a bracket for mounting to the cutmaster series. However, I got the smaller unit, the 42 and the brackets doesn't fit it. So I had to come up with an alternative mounting method. Also, the company that makes the filter sells a rebuild kit with seals and replacement filters. Does not appear that cyberweld carries those kits. The price quoted by cyberweld for just the cartridges was a bit high, IMO. Spendy little unit.
By Bert
South Texas
May 21, 2014
Very effective filter!
This unit is removing moisture and particles very efficiently from my Plasma Cutter air supply.
ProsClean air
ConsCost is high but having clean air is worth it.
By Annie
El Paso, TX
June 20, 2012
Everything was as promissed
It arrived as stated on time & in good condition
By Galen B.
Redwood Valley,Ca
March 10, 2012
Filter for PAK 52
A must have for the Thermal Dynamics PAK 52. Keeps the torch clean and free of water and dirt.
ProsEasy to install good setup
ConsNONE

back
close menu
Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387 detail
Thermal Dynamics Plasma 2 Stage Air Filter Kit 9-9387
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm www.P65Warnings.ca.gov