Home // Shop All Brands // John Tillman // Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

Home // Safety Products // Welding and Safety Clothing // Welding Gloves // High Heat Gloves // Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

<< Prev

Next >>

Home // Safety Products // Welding Gloves // High Heat Gloves // Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

<< Prev

Next >>

Home // Safety Products // Welding and Safety Clothing // Welding Gloves // Stick Welding Gloves // Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

<< Prev

Next >>

Home // Safety Products // Welding Gloves // Stick Welding Gloves // Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

<< Prev

Next >>

Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

Code: 820BHP

Cyberweld Price $56.99

Mfg Industrial Price: $79.96

(You Save $22.97)

8 Reviews

Size:L

QTY

FAST & FREE SHIPPING On All Orders Over $50

2 Questions & 2 Answers

Description

Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP

4 layers of protection! Glove is made from aluminized rayon and Cowhide with Wool lining for extreme reflective heat, along with an aluminized carbon Kevlar snap-on back hand pad.

Features

Aluminized rayon back.

Cowhide split palm.

14 inch length.

Reinforced thumb.

Includes snap-on back-hand pad (558) made from ACK and black vermiculite coated fiberglass.

Wool lined for greater insulation.

For higher heat protection only.

This item ships Free via standard ground shipping within contiguous U.S.

Accessories

Tillman Back Hand Pad 558 - AKC Replacement Pad For 820 Glove

558

Mfg Industrial Price: $9.45

$7.10

You Save $2.35

Tillman Back Hand Pad 558 - AKC Replacement Pad For 820 Glove

Ask & Answer

2 Questions & 2 Answers

Ask a Question

Merlin

from California asked:

August 30, 2020

Is this a pair of gloves or just left hand?

1 Answer

Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves 820BHP is a pair of gloves.

Submitted by: Cyberweld on September 1, 2020

Most Helpful Answer

Answer

dave

from pittsburgh asked:

August 11, 2012

can these glove be used for overhead mig welding

1 Answer

No, the Tillman 820BHP welding gloves should not be used for overhead welding. The back hand pad actually extends beyond the width of the welding glove and may act to actually catch overhead spatter and slag. You would be better off using the Tillman 822 glove, if high heat is a concern. http://store.cyberweld.com/tiweglalbahi.html

Submitted by: Customer Service on August 13, 2012

Most Helpful Answer

Answer

Reviews

1518449299

Write a Review

Review Summary

4.6

8 Reviews

88% (7)

0% (0)

13% (1)

0% (0)

88% Recommend this product (7 of 8 responses)

By Steve

Boyertown Pa

Short life

February 10, 2018

I have bought two sets of these gloves and they both have the same design flaw. The stitching between the aluminize back in the leather palm seems to fails within a few days creating holes in the fingertips. Perhaps maybe if they use Kevlar thread or maybe if they put the aluminized backing on a standard leather glove. But they are great in high heat situations for as long as they last which about two weeks too much money for such a short life expectancy

By Sc c.

Nice high temp resistant gloves

January 2, 2018

Works well.
Bulky... but not as bulky as they look.

By Benjamin

Tacoma, WA

Cool Gloves

November 29, 2017

Gloves work exactly as advertised. I got tired of burning the back of my left hand shielding heat from my face. I was about to go from SMAW to GMAW in school and I did not want my hand to look like a pizza with extra cheese so I ordered these. No issues since and my hands feel great.

+Hands feel like they have been in some wool gloves. +Great glove for cold weather. -Ugly and flashy at the same time. Expect looks from others in the shop. -This glove might suck if you are in a warm weather climate.

By Leona

Orlando, Florida

Perfect description

November 11, 2015

My husband has been a welder for over 30 yrs. and these are the only gloves he will buy now. They are the best in heat protection.

By Bob

Sioux Falls

Not too shabby

April 15, 2015

If a person does a lot of heavy duty wire feed welding... 1/16th Inch 250 I/s 300amp 25 volt stuff, these would work really really well. I really get sick of hot hands and having to switch off hands and shake the glove to cool it down, with these you wont have to do that. I think they would work pretty good for light and medium duty air arc stuff, up to 500amps DCEP.

Fit wise, my hands are an x-large, and these fit decently. The backhand pad doesnt really get in the way, and it does take a few mins to get used to them. I was building up some DTH hammer chucks and subs and my hands never got hot running 1/8th inch stoody 2110 at about 170amps. Normally my left glove gets a lil toasty doing that.

By Tom

Missouri

Great high heat glove

September 26, 2013

I used to keep a box of welding gloves on hand for the big jobs. I'd have to change gloves several times during an operation just to keep my hands cool - let alone the hardening and cracking of the glove. With the heat pads, these bad boys last a long time, even when burning 1/4 inch rod. Just remember, as with any welding glove, they are meant to protect from radiant heat and accidental contact, not continued contact with hot items!

With the pad, they are quite a bit stiffer than ordinary welding gloves, so I like to have a variety in the shop. Everything from the supple TIG gloves to these mitts here.

Great protection from intense, radiant welding heat None

By Erik M.

Gresham Oregon

Tillman Welding Gloves - Aluminized Back Extreme Heat Gloves are the best welding gloves I have used

November 13, 2012

As a welding student at Portland Community College Rock Creek Campus. I can tell you i am hard on welding gloves. I went through a pair of standard leather welding gloves every few weeks did not matter what brand.I used them all. With the same problem leather would srink get hard and crack do to the heat and spatter and the lining wears out. These gloves don't srink get hard and crack do to the heat and spatter and the lining dose not wear out nearly as fast as other gloves I'am replacing the gloves before the lining . The gloves have lasted me nearly ten months.At $42.30 they are not cheap but 42.30 every ten months vs 7.50 to 14.00 dallors a pair every two to three weeks it is just more cost effective for me. I'am right handed so i hold electrode holder or gun depending on the process with that hand and use my left hand to brace my right hand while welding. So i take the heat sheild off the right glove and put it on the left glove when the first heat sheild needs replaced.If you can't wear wool these are not for you the lining is a wool blend.

these gloves are as rugged and dependable the price is a bit steep

By Jonas

Clear Lake, SD

Sweet protection

October 8, 2012

Very good heat protection, surprisingly good dexterity with them. Wool liner provides additional thermal protection.