Description

Miller Multimatic® 255 Multiprocess Welder w/EZ-Latch™ Single Cylinder Running Gear 951767
The Miller Multimatic® 255 multi-process welder with EZ-Latch™ single cylinder running gear is a 350 amp, portable welder that is capable of MIG, Pulsed MIG, Stick, DC TIG and DC Pulsed TIG welding. The Multimatic® 255 comes complete with full color seven inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. In addition to built-in welding programs, the 255 can also store your custom welding programs. It seamlessly switches between welding with standard MIG gun or optional Spoolmatic™ spool gun. The 255 also features direct plug for XR push-pull gun for professional aluminum wire feed capability. This allows you to use 12 inch spools of aluminum MIG wire instead of the more expensive 1 lb rolls used with the spool gun.
EZ-Latch™ running gear with single cylinder cylinder rack gives unmatched portability to the Multimatic 255. For moving around the shop, the 255 attaches to the running gear through a series of four, quick-disconnect latches. For times when your 255 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 255 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit.
NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in three steps and include: cart with front caster wheels, cylinder tray with rear wheels and cylinder post.The Multimatic® 255 runs on 208 to 575 volt input power, using Miller's Auto-Line™ technology that automatically detects input voltage. It comes complete with MIG welding gun, shielding gas regulator with hose, stick electrode holder and ground clamp. TIG welding kit is sold separately.
Processes
MIG (GMAW)
Pulsed MIG (GMAW-P
Stick (SMAW)
Flux Cored (FCAW)
DC TIG (DC GTAW)
DC Pulsed TIG (DC GTAW-P)
Features
EZ-Latch™ single cylinder running gear provides unmatched portability for the Multimatic 255. Operators no longer need to lift machine AND running gear when loading or moving. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability. Cylinder rack features bottle forward technology for increased
stability when moving along an incline and running gear has built-in storage for accessories.
Multiprocess capabilities include MIG,
flux cored, DC stick (6010) and DC Lift-Arc™
TIG welding. The Multimatic 255 also
has pulsing capability that allows it to do
pulsed MIG and TIG welding.
Intuitive color LCD user interface makes it
quick and easy to adjust parameters.

Auto-Set™ Elite offers
predefined weld settings to
increase ease of use and
ensure that the job is done
right for operators of all
skill levels.
Available for MIG,
pulsed MIG, stick and
DC TIG processes with the ability to fine-tune your settings.
Set weld parameters by selecting:
MIG (shown)—wire and gas type, wire diameter and material thickness
Stick—electrode type, electrode diameter and material thickness
DC Lift-Arc™ TIG—remote on/off, tungsten diameter and material thickness
Program mode allows easy
save and recall of favorite
weld settings.
Save up to four programs
for each process.
Deliver more productivity
by eliminating need to
manually set parameters.
Deliver consistent quality
by welders of all skill levels
with prequalified settings.
Minimize supervisor
intervention.
Compatible with push-pull MIG guns. Increases productivity by
allowing the use of 12-inch wire spools versus a spool gun’s 4-inch
spools. Reduces downtime from changing wire spools.
Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers
for faster switching between MIG, push-pull and spool guns.
Auto-Line™ allows for any single-phase
input voltage hookup (208–575 V) with no manual linking, providing
convenience in any job setting. Ideal solution for dirty or unreliable power.
Pulsed MIG welding delivers higher quality
welds for ALL welders.
Lower heat input for less distortion on
thin materials and better puddle control
on out-of-position welds.
Less spatter minimizes post weld grinding
and rework, allowing more welding time.
Perform welding applications that couldn’t be done in the past.
Ideal for MIG welding aluminum and stainless steel.
OPTIONAL TIG
Kit - gives you everything
you need for remote
TIG welding with the
Multimatic 255. Includes RFCS-14HD remote foot control, 10-Pin to 14-Pin adapter cord, 25 ft. Weldcraft® 150-amp WP17 TIG torch with 50-mm Dinse connector, AK-2 torch accessory kit, regulator and gas hose.

Specs

This is a DC only machine. It cannot TIG weld Aluminum

Comes complete with
Multimatic® 255 multi-process welder with 10 ft. (3 m) industrial power cord
EZ-Latch™ single cylinder running gear accepts up to "T" size (300 cubic foot) shielding gas cylinder
Cylinder chain
15 ft. (4.5 m) 250-amp MDX™-250 MIG gun with Bernard® AccuLock™ S
consumables for .035/.045 in. (0.9/1.2 mm) wire
10 ft. (3 m) cable with electrode holder and 50 mm Dinse-style connector
10 ft. (3 m) work cable with clamp and 50 mm Dinse-style connector
Flow gauge regulator and gas hose for argon or AR/CO2 mix
.035/.045 in. (0.9/1.2 mm) reversible drive rolls
Extra contact tips
Material thickness gauge
FREE Miller® Classic VSi ClearLight™ auto-darkening welding hood.
FREE Hobart® Fabshield® 21B 10 lb. spool .035 E71T-11 flux-cored welding wire.


Get a FREE Miller® Classic VSi ClearLight™ auto-darkening welding helmet ($188.79 MSRP Value) PLUS a FREE 10 lb. spool of Hobart® Fabshield® 21B .035 E71T-11 flux-cored welding wire ($91.76 MSRP Value) with purchase of a Multimatic® 255 MIG welder. Expires 6/30/22. (No substitutions allowed.)
The Miller® Classic Black VSi ClearLight™ welding helmet with integrated grinding shield features a four color variable shade 8-13 auto-darkening lens with Miller's innovative X-Mode™. ClearLight™ offers a bright, crisp, clear view of the weld puddle with more realistic color hues in both light and dark states. The X-Mode™ feature is excellent for welding outdoors or for low amperage welding. The Classic VSi ClearLight gives you the added convenience of a fully integrated grinding shield built right into the helmet.
The Classic Black VSi ClearLight lens also features Miller's replaceable battery/solar-assist Classic Series lens technology (no recharging required). It is one of the most versatile DIY and light industrial welding helmets you can buy. The VSi lens offers unsurpassed light-state clarity and exceptional battery life at an unbeatable price.
Classic Series
The ideal welding helmet for DIY and light-duty industrial applications.

Classic VSi Features
ClearLight™ lens technology optimizes contrast
and clarity in welding and light states - reducing eye strain and operator fatigue

Variable shade 8-13
X-Mode™ allows welding in bright sunlight without unwanted lens darkening. Also detects low amperage DC TIG arc and obstructed-view welding arcs
Manual On/Auto-Off circuitry
Three independent arc sensors
TIG rated down to 5 amps
Features magnifying lens holder
Flip up design with integrated grinding shield
Extra protective lens covers included
Classic Series Specs


Fabshield® 21B Features
E71T11 Self-Shielded Wire - no shielding gas needed
.035 wire diameter
Excellent for general purpose carbon steel welding applications.
Works well on galvanized steel.
All-position, single or multiple pass
This item ships Free via standard ground shipping within contiguous U.S.