Millermatic 211 MIG Welder Auto Repair Pkg. 951715

Millermatic® 211 MIG Welder Auto Repair Package 9516715

The Millermatic® 211 MIG Welder Auto Repair is a multi-voltage, 230 amp portable MIG welding package that is optimized to move around an auto repair shop. The Auto Repair package comes complete with a 230 volt, 25 foot extension cord. When coupled with the standard 6.5 foot MM211 power cord and 10 foot MIG gun, you can weld nearly 42 feet away from your shop's 230V wall outlet. The small running gear with single cylinder rack makes it quick and easy to move your entire welding system anywhere it needs to go. The Auto Repair package also includes a protective cover for your welder to keep it free of dust and debris when not in use.

The Millermatic 211 runs on both 120 volt and 240 volt input power. The inverter design of the Millermatic 211 means it draws less power, has a superior welding arc and weighs up to 40% less than other MIG welders in its class. The MM 211 weighs only 38 pounds and is capable of MIG welding mild steel up to 3/8 inch thick. It features Advanced Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Advanced Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel, stainless steel or aluminum and can be used with solid MIG wire or flux-cored wire. Advanced Auto-Set also allows for the use of several different shielding gases, including CO2, Argon and Argon/CO2 C25 mix.

Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. The parameter door chart lists voltage and wire feed speed settings options.

The included heavy-duty welder cart/cylinder rack has eight inch rubber wheels in back and front casters for easy maneuvering. The gas cylinder rack is designed to hold one shielding gas cylinder no larger than 7 in (178 mm) diameter, maximum weight 65 lb pounds (80 cubic foot capacity is ideal)



Processes

• MIG (GMAW)
• Flux Cored (FCAW) (gas and self-shielded)
  
  Applications
  Light Fabrication
  Maintenance and Repair
  Auto Body
  Farm/Home
  
  
  
  Features:
• Advanced Auto-Set™ - now includes five different wire/gas combinations and .024-inch (0.6 mm) wire capability. The easiest welder to use just became more versatile.
• Wire/gas combinations include Flux Cored, Mild Steel with 100% CO 2 , Mild Steel with C25, Stainless Steel, and Aluminum with spool gun
• Select the wire type and gas being used
• Set the wire diameter, and select from .024, .030 and .035 diameters. A blue LED indicates that Auto-Set is activated
• Dial in the thickness of what you are welding
• Start welding with the exact parameters you need!

• Miller inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds
• Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
• Quick Select™ drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.
• Auto Spoolgun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
• Smooth-Start™ provides a smooth, spatter-free start. It is the best-starting machine in the small MIG machine category.
• Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.
• Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.
• Uses 4 inch or 8 inch (102 or 203 mm) spools and can be set up to weld with .024 to .035 inch (0.6 to 0.9 mm) solid wire and .030 to .045 inch (0.8 to 1.1 mm) flux-cored wire.
  
  Specs
  
  
  
  
  
  Comes complete with:
• Millermatic® 211 MIG welder
• Protective cover #301262
• Running Gear/Cylinder Rack #301239
• 6.5-ft. (2 m) power cord with MVP plugs for 120 V and 240 V
• 25 foot, 230 volt extension cord
• 10-ft. (3 m), MDX™-100 MIG gun and cable assembly
• 10-ft. (3 m) work cable with clamp
• Argon - Argon/CO2 mix flow gauge regulator with gas hose
• 10 lb. spool Hobart® .030-in. (0.8 mm) E70S-6 solid wire
• Ten contact tips for .030-in. (0.8 mm) wire
• Quick Select&reg drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
• Material thickness gauge #229 895
• Velcro cord wraps

PLUS get a $300.00 rebate from Miller® with the purchase of this Millermatic® 211 MIG welder. Rebate form must be submitted online HERE within 30 days of original purchase. Expires 12/31/24.

Earn additional rebates when you purchase additional Miller® branded accessories or Hobart® filler metals.